• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1666-1669
• /
• 2002

In the process of creating architectural scenes from photographs using Model-based Stereo 〔1〕, the geometric model is used as prior information to solve correspondence problems and recover the depth or disparity of real scenes. This paper presents an Image Subregioning algorithm that divides left and right images into several rectangular sub-images. The division is done according to the estimated depth of real scenes using a Heuristic Approach. The depth difference between the reality and the model can be partitioned into each depth level. This reduces disparity search range in the Similarity Function. For architectural scenes with complex depth, experiments using the above approach show that accurate disparity maps and better results when rendering scenes can be achieved by the proposed algorithm.

• Journal of Oral Medicine and Pain
• /
• v.21 no.1
• /
• pp.197-206
• /
• 1996

This study ws performed to investigate the relationship between cervical curvature and the spatial position of the posterior part of the atlas imaged in the lateral cephalograph. Sixty six patients with temporomandibular disorders(TMD) and twenty dental students were selected for patients group and control group, respectively. The average age of patients group was 26.3 years, and 24.9 years in control group. Measured variables were cervical depth, upper space between the atlas and the base of the occiput, lower space between the atlas and the spinous process of the axis, rea of the posterior part of the atlas imaged in the lateral cephalograph, and the cervical curvature passing through the uppermost point in dorsal side of Dens of the Axis to the lowermost and rearmost point of the 5th cervical vertebra. The reliability of the method used for measuring cervical curvature with curved ruler was also tested. The results obtained were as follows : 1. Cervical depth of patients group was 122.9mm and significantly shorter than that of control group, in which cervical depth was 131.9mm, and cervical depth was significantly correlated with other variables in all subjects. 2. Upper space was greater in patients group, but total space including upper and lower space showed no difference between the two groups. The average value of total space was 26.5mm. 3. Area of the posterior part of the atlas was 168.2$\textrm{mm}^2$ in patients group, and 186.5$\textrm{mm}^2$ in control group with significant difference between the two groups. 4. Average range of radius of cervical curvature were 33-40cm and there was no difference between the two groups. 5. There was no significant correlation between the cervical curvature and the area of the posterior arch of the atlas. 6. The method using curved ruler for measuring cervical curvature could be accepted as a reliable method.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.3
• /
• pp.160-164
• /
• 2017

Background: This study were performed to determine the effect of root pruning of Zizyphus jujuba var. inermis (Bunge) Rehder. Root cutting inhibit vegetative growth and promote reproductive growth as temporarily reducing growth, net assimilation, water potential of leaf and cytokinin level. Methods and Results: The root pruning was treated of the root cutting widths 50, and 80 ㎝ and the root cutting depths 10, and 20 cm. The amount of root pruning and the number of suckers were the highest in the root-pruning treatment at a width of 50 cm and a depth of 20 cm. The blooming time was from June 18 to 20, and no difference was observed in the blooming time among the root-pruning treatments. The number of flowers was rather higher in the root-pruning treatment at a width of 50 cm and a depth of 20 cm and at a width of 80 cm and a depth of 20 cm. The percentage of fruit setting was higher in the plants whose roots were pruned at a depth of 20 cm than in the untreated plants. The fruit size, fruit weight, and sugar content showed no difference among the root-pruning treatments. Conclusions: The results showed that percentage of fruit setting increased with root pruning, while no difference was observed in the growth and fruit quality of plants.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.499-508
• /
• 2004

Regeneration of Periodontium with PRP does not only improve regeneration rate and density of bone but have a possibility to estimate faster healing process for soft tissue. And also, autogenous bone and xenogenic bone graft are effective on regeneration of periodontium. The purpose of this study is to evaluate the effectiveness of autogenous bone and xenogenic bone $(BBP^{(R)})$ grafts with the PRP technique on regeneration of periodontium. 52 Generally healthy Pt. who had pocket depth 5mm at any of 6 surfaces of the teeth were in the study at Dept. of Perio. in Dankook Dental Hospital. Open Flap was treated for 18 infra-bony pockets as control group, autogenous bone with PRP was inserted for 25 infrabony pockets as first test group, and $(BBP^{(R)})$ with PRP was inserted for 22 infrabony pockets as 2nd test group. Then evaluation was made after 3 and 6 months 1. There were significant differences between average probing pocket depth and clinical attachment level of 3, 6 months and minimal and maximal attachment level after 6 months each other. 2. There were significant differences in average probing pocket depth of control group and 2nd experimental group between 1 and 6 months. For clinical attachment level and minimal and maximal proving attachment level, there was a significant difference after 6 month of surgery. 3. There was no significant difference between two test groups for average probing depth, clinical attachment level, and minimal and maximal probing attachment level. As the result, PRP with bone graft could be very effective for regeneration of periodontium and there was no difference between xenogenic bone and autogenous bone.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.6
• /
• pp.23-29
• /
• 2016

In this paper, we propose a method of depth video coding to find the closest sphere through the depth information when the spherical object is captured. We find the closest sphere to the captured spherical object using method of least squares in each block. Then, we estimate the depth value through the found sphere and encode the depth video through difference between the measured depth values and the estimated depth values. Also, we encode factors of the estimated sphere with encoded pixels within the block. The proposed method improves the coding efficiency up to 81% compared to the conventional DPCM method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.205-212
• /
• 2011

In this paper, we have proposed a method for quantization of the stratification strength in the sea water and analysing the distributions of the maximum stratification depths calculated by the method at the seas near the Korean peninsular. For calculating the stratification strength, modified and applied the potential energy anomaly formular which was suggested by Simpson in 1977. The data had been collected by NFRDI from 1971 to 2008 were used to determine the maximum vertical density gradient depth and the relative potential energy anomaly at that depth. In the East Sea, the stratification depth has become deepened about 20m in February and April since 1971. In Yellow-South Sea, the maximum density gradient depth has been deepened about 10m only in December during the same period and the difference of the stratification depth between summer and winter has been enlarged. These trends of variation of stratification strength and depth near the Korean peninsular should be investigated more carefully and continuously. And the results of these studies could be adopted for the more efficient operation of underwater weapon and detection systems.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.325-338
• /
• 2002

Bone graft using growth factors and guided tissue regeneration have been used for the regeneration of infrabony defects which caused by periodontal disease. Calcium sulfate which is one of the resorbable barrier materials used for guided tissue regeneration. Platelet rich plasma which is a easy method to obtain the growth factors had many common points but, platelet rich plasma was still studying. This study was the comparative study between bone graft using platelet rich plasma and guided tissue regeneration using calcium sulfate barrier material in clinical view. For the study, 28 sites(2 or 3 wall infrabony defects) were treated. 14 infrabony defects were received surgical implantation of BBP-calcium sulfate composite with a calcium sulfate barrier and the others received BBP mixed with platelet rich plasma. Clinical outcome was accessed 3 and 6 months of postsurgery. 1. There was no statistical difference between CS group and PRP group in pocket depth, gingival recession, clinical attachment level, and probing bone level at baseline. 2. There was statistically significant reduction in probing depth, clinical attachment level, and probing bone level at 3 and 6 months postsurgery(p<0.05). 3. In the probing depth and clincial attachment level PPR group had less improvement than CS group, but there was no statistically difference at 3 and 6 months postsurgery. 4. In the recession PPR group had less recession than CS group, but there was no statistically difference at 3 and 6 months postsurgery. 5. In the probing bone level PPR group had less improvement than CS group, but there was no statistically difference at 6 months postsurgery. In conclusion bone graft using platelet rich plasma and guided tissue regeneration using calcium sulfate barrier showed similar clinical improvement for the treatment of 2 or 3 wall infrabony defects.

• Journal of radiological science and technology
• /
• v.42 no.1
• /
• pp.47-51
• /
• 2019

This study was conducted from July 1 to September 30, 2018 using Optically Stimulated Luminescence Dosimeter(OSLD) and photoluminescent glass dosimeter(PLD) to measure the 3-month exposure dose and the cumulative dose in the active working area of the nuclear medicine worker Respectively. As a result, the cumulative dose for three months in the worker and work area was measured as 1.97 mSv and 2.02 mSv in the PLD. The mean surface dose and the mean depth dose of the OSLD were measured to be 2.04 mSv. The difference in the total surface dose measured by the PLD and the OSLD was 0.66mSv and the total mean surface dose was 0.07mSv. The difference between the total depth dose and the total depth dose was 0.1mSv and 0.02mSv, respectively. It was found that the dose value of the OSLD was higher than that of the PLD. In addition, it was found that the maximum difference of 0.01mSv was observed between the PLD and the OSLD of the worker. For the dose measurement of the two dosimetry systems, there was no significant difference between the PLD and the OSLD in the surface dose of 0.239 (p>0.05). Also, the significance of PLD and OSLD in the deep dose was 0.109, which was not statistically significant (p>0.05).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.919-927
• /
• 1997

The main purpose of this study is to determine bifurcation as the primary instability of a glass melting furnace. Steady-state and unsteady characteristics of natural convection in the partially open cavity as appeared in a glass melting furnace is investigated by using numerical analysis. Three types of convection, such as steady laminar, unsteady periodic or unsteady quasi-periodic convection may occur according to the temperature difference between upper two isothermal surfaces along the depth of cavity in a glass melting furnace. In the temperature difference of 150-900 K between batch and free surface, the larger the temperature difference, the weaker the convection strength and unsteadiness. Since the glass viscosity is increasing exponentially in the lower temperature, the batch freezes the thermofluidic field especially below the surface of it. If the depth of cavity is 0.5 m, the bifurcation to time-dependent natural convection may occur in the range of 60-650 K. If that is 1.0 m, it may occur in the whole range of temperature difference.

• Restorative Dentistry and Endodontics
• /
• v.11 no.1
• /
• pp.43-52
• /
• 1985

The purpose of this study was to measure the Micro-Knoop Hardness of three commercial visible light-cured composite resins (Plurafil-super, He1iosit and Durafi) according to the difference of depth and shade. Specimens of the resin were prepapared in plastic tubes 5mm in diameter with height of 5mm, and the tubes were put into the columned holes in stone molds. The molds were exposed to the visible light through the hole 5mm in diameter in metal plate. Specimens were sectioned (longitudinally) with disk. Knoop Hardness measurements were made at the depth of surface, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0mm from the surface to the deep portion. Knoop Hardness numbers were taken on each depth under 20gm load for 10 seconds with Shimadzu Tester. The following results were: 1. The highest hardness value was measured at 0.5mm depth. Then the deeper the depth, the lesser the hardness was observed. 2. The value of hardness was directly propotional to the time of exposure to the light. 3. The hardness of light shade resin was higher than the that of the dark shade. 4. The pattern of hardness change at varying depth is similar to all the experimental materials with no relation to the shade nor exposure time.