• International Journal of Contents
• /
• 제10권3호
• /
• pp.9-16
• /
• 2014

Depth-image-based rendering is generally used in real-time 2D-to-3D conversion for 3DTV. However, inaccurate depth maps cause flickering issues between image frames in a video sequence, resulting in eye fatigue while viewing 3DTV. To resolve this flickering issue, we propose a new 2D-to-3D conversion scheme based on fast and robust depth-map generation from a 2D video sequence. The proposed depth-map generation algorithm divides an input video sequence into several cuts using a color histogram. The initial depth of each cut is assigned based on a hypothesized depth-gradient model. The initial depth map of the current frame is refined using color and motion information. Thereafter, the depth map of the next frame is updated using the difference image to reduce depth flickering. The experimental results confirm that the proposed scheme performs real-time 2D-to-3D conversions effectively and reduces human eye fatigue.

• 디지털융복합연구
• /
• 제14권11호
• /
• pp.435-440
• /
• 2016

양안 굴절이상 차이에 의한 안광학상수 변화도 분석을 통한 양안 굴절이상 차이의 특성을 이해 할 수 있는 기초자료를 제공하고자 하였다. 20-59세의 건강한 성인 100명을 대상으로 KR-8800을 이용하여 등가구면 굴절력과 각막곡률 반경을, IOL Master를 사용하여 안축장길이와 전방깊이를 측정하였으며, 측정값의 차이는 우안 측정값-좌안 측정값의 차이값에 절대 값을 구하여 사용하였다. 전체 대상자의 등가구면 굴절력은 $-1.83{\pm}2.17D$이고, 안축장길이는 23.00~24.99mm, 각막곡률반경은 7.50~7.89mm, 전방깊이는 3.60~4.09mm의 범위에서 가장 많았다. 양안 등가구면 굴절력 차이에 따른 양안 안축장길이 차이와 양안 전방깊이의 차이가 유의한 상관관계가 있었다. 또한, 양안 굴절력 차이에 의한 양안 안축장 길이 차이가 가장 크고, 가장 높은 상관성이 있었다. 양안 굴절력 차이는 안광학 상수와 밀접한 관계가 있고, 양안 굴절력 차이에 의하여 여러 가지 시기능 문제가 발생 할 수 있으므로, 양안 굴절이상 차이에 따른 요인별 분류를 통한 융복합 연구가 필요하다.

• Fisheries and Aquatic Sciences
• /
• 제16권2호
• /
• pp.101-108
• /
• 2013

An active stimulating device (ASD) consisting of a net panel or ropes fluttering in the turbulence inside the cod end was effective in driving fish near the cod end to reduce juvenile by-catch. The fluttering characteristics of the rope and net panel were examined by video observations and analyzed for fluttering amplitude and period in a water channel and in field experiments with a bottom trawl. The amplitude ratio of the fluttering ropes or nets in the tank test increased with the fluttering index as the diameter of the twine, mesh size, flexibility, and flow velocity changed, whereas the period decreased with the above factors. In bottom trawl experiments, the range of mean depth difference in the fluttering net panel was 12-17% of the length of the fluttering net, and the period of depth difference or three-dimensional (3D) tilt was revealed, with shorter ones ranging from 2 to 6 s. The amplitude as depth difference and period from field measurements were similar to those of nets in tank experiments and also to the period of 3D flow velocity inside the cod end. These results could be used to design an ASD that could be used for to the cod end of actual towed fishing gear to reduce juvenile by-catch.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.29-45
• /
• 1997

This study aims at designing sleeves which are suitable for arm shapes and arm movements. With the samples of of ordinary 24 women aged from 20 to 22, the arm shapes and movements were measured 3-dimensionally using a motion analyzer and a sonic digitizer, and then clasified into three characteristic types (A, B, and C). Our analysis leads to the following conclusion. The factors classifying arm shapes are the length from acromion to posterior armpit point, arm hole length, the cap height, difference in height between anterior and posterior armpit points, armhole circumference, upper arm circumferemce, armhole depth, and underarm circumference. The characteristics of arm type A is that the armhole depth and the length from acromion to posterior armpit point are the largest, while the circumference inbe- tween upper arm and elbow is the smallest among the three arm types. Thus, the large circumference difference between upper and lower arms is the most notable in arm type A. The factors classifying arm shapes for arm type B are the smallest except for the circumference inbetween upper arm and elbow which is larger than that for arm type A. The circumference difference betweemn upper and lower arms is small for arm type B. Arm type C has the smallest armhole depth, while other factors are similar to those for arm type B. In type C, the size of upper arm is comparatively small on the frontal plane, while it is the largest on the sagital plane.

• The Journal of Korean Physical Therapy
• /
• 제23권6호
• /
• pp.77-84
• /
• 2011

Purpose: The objectives of this study were to determine the enhancing effect of iontophoresis method as it transdermally deliver methylene blue (MB) using visual examination, in terms of penetration depth and tissue distribution in the skin, and to determine the effect of application duration on the efficacy of iontophoresis. Methods: Twenty-four male Sprague-Dawley rats were randomly divided into 5-, 10-, 20-, and 40-minute groups. These rats were exposed to either topical or anodic iontophoresis of 1% MB using a direct current of $0.5mA/cm^2$ for 5, 10, 20, and 40 minutes. Using cryosections of rat tissues, the penetration depth of MB was measured using light microscopy. Results: Significant differences in the penetration depth (F=54.20, p<0.001) were detected among the four groups. Post hoc comparisons of the penetration depth of MB data pooled across groups showed no significant difference between all topical application groups and 5-minute iontophoresis group, but did reveal a significant difference in the penetration depth between all topical application groups and 5-minute iontophoresis group versus 10-minute group, between the 10-minute and 20-minute group, and between the 20-minute and 40-minute iontophoresis group (p<0.05). Conclusion: The results demonstrate that iontophoresis enhances transdermal delivery of MB across stratum corneum of skin barrier by visual examination. Furthermore, the penetration depth of iontophoretic transdermal delivery of MB was dependent on the application duration. The duration of iontophoresis is one of the important factor in the efficacy of iontophoresis application.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.69-81
• /
• 2024

In order to understand water depth distribution in the waters of the southwestern sea offshore wind power demonstration complex, field observations were conducted using a multi-beam echosounder from before construction (2018.2) to operation (2022.8). After data processing and correction of the observed depth, cross-sectional analysis was performed to calculate the maximum water depth value, and time phase analysis was performed using the maximum water depth value. The maximum water depth change rate over time tended to gradually decrease, and there was little difference in the rate of change before the construction of the wind turbine foundation structure, and the rate of change was rapid when the foundation structure was under construction. As a result of time phase analysis, the rate of change of the first (2018.02) and the second (2018.05) showed a rate between -6.27 and -4.13, on average, as the rate of change before the construction of the offshore wind farm, and there was no difference between the first and second rates. The third (2018.11) rate of change was -4.25 to -1.82, and the fourth (2019.04) rate of change was -2.34 to -1.22, and the rate of change increased rapidly after the third time. The fifth (2019.07) rate of change was -2.11 to -1.31, the sixth (2021.05) rate of change was -2.09 to -1.28, and the seventh (2022.08) was -2.11 to -1.22 rate of change, and after the rate of change reached some extent, the change was analyzed in an insufficient graph.

• 한국멀티미디어학회논문지
• /
• 제19권10호
• /
• pp.1767-1774
• /
• 2016

In this paper, we propose the adaptation filtering for correcting the movement path of the recognized object by the depth information. When we recognize the object by the depth information, the path error should be occurred because of the noises in the depth information. The path error is corrected by appling the lowpass filtering, but the lowpass filtering is not efficient when the changes of the object's movement are rapid. In this paper, we apply the adaptation filtering that it gives weights adaptively as the difference between the predicted location and the measured location. To apply the adaptation filtering, we can see that the proposed method can correct accurately the path error of the radical change from simulation results.

• 대한인간공학회지
• /
• 제23권3호
• /
• pp.111-119
• /
• 2004

In this study, we analyzed the old`s characteristics for depth perception in comparison with the young`s as a basic study for universal design in field of products or facilities. Twenty three of the old and twenty two of the young had participated and the depth perception apparatus was used in this experiment. Gender, viewing distance, and age were considered as factors and the differences of depth perception were analyzed for each experimental condition. In the result, a significant difference was not detected on gender, but significant differences were detected on age and viewing distance. That is, we can see that the old is remarkably worse than the young on depth perception task. Therefore, it means that these characteristics have to be absolutely considered in user interface design to improve the old`s accessibility for products or facilities.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.263-266
• /
• 2003

The purpose of this study is to investigate the effects of ponding depth treatment on water balance in paddy fields. The ponding depth treatments were very shallow, shallow and deep. Daily values of rainfall amount, ponding depth, irrigation water, drainage water, evapotranspiration, and infiltration were measured in the field. The medium ponded plots saved irrigation water about 16% to 53.4% without any statistical difference in rice growth and yields. Hence, the medium ponded depth treatment is better than the traditional deep ponded depth to save water in the transplanted rice culture.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1907-1914
• /
• 1995

An on-line measurement of the workpiece hardened depth in laser surface hardening processes is very much difficult to achieve, since the hardening process occurs in depth wise direction. In this paper, the hardened depth is estimated using a multilayered neural network. Input data of the neural network are the surface temperatures at arbitrary chosen five surface points, laser power and traveling speed of laser beam torch. To simulate the actual hardening process, a finite difference method(FDM) is used to model the process. Since this model yields the calculation results of the temperature distribution around the workpiece volume in the vicinity of the laser torch, this model is used to obtain the network's training data and laser to evaluate the performance of the neural network estimator. The simulation results show that the proposed scheme can be used to estimate the hardened depth with reasonable accuracy.