• 한국토양비료학회지
• /
• 제33권1호
• /
• pp.8-14
• /
• 2000

암모늄태질소를 질소의 급원으로 공급하기 위하여 요소와 유안을 질소조성물로 하여 2대1로 혼합한 후 다시 점결제 및 확산완충계와 혼합하여 비커형태의 용기안에 충진하여 제조된 시제품인 $NH_4$-Beaker Deeposit비료를 토마토유묘의 정식기에 유묘의 밑으로 1회 국지사용하여 토마토에 대한 생육 및 수량과 질소공급 효과를 일반 시비방법인 $NH_4NO_3$를 3회 전층 분배시용한 관행의 대구조와 비교하였다. 1년차 시험에서 질소의 용출을 조절하기 위하여 유안과 요소를 2:1로 혼합한 질소조성물에 7.5 g의 석고를 점결제로 사용하였을 때 토마토과실 수량은 1주당 6345 g으로 관행의 대조구의 수량인 5865 g보다 증수되었다. 토마토과실과 경엽의 총 질소흡수량 또한 7.5 g의 석고를 점결제로 사용한 $NH_4$-Beaker Deposit비료 시용구에서 8997 mg으로 관행의 7215 mg보다 통계적 유의성이 있었다. 2년차 시험에서는 C/N율이 10인 퇴비를 확산완충제로 비커에 충진한 시험구 5를 제외한 모든 $NH_4$-Beaker Deposit비료의 시용구에서의 질소흡수량이 높았다. 질소의 용출을 조절하기 위하여 7.5 g의 석고를 비커안에 충진하고, 그 윗부분으로 질소의 확산기울기를 조절하기 위하여 점질토양을 확산 완충제로 충진한 처리구에서의 토마토과실의 질소흡수량은 주당 8646 mg으로 가장 높았으며 관행의 대조구와 통계적인 유의성이 있었다. 토마토작물의 뿌리분포를 조사한 결과 확산완충제로 점질토양, C/N율이 16인 퇴비를 사용한 처리구의 경우 뿌리가 비커로 집중분포 되는 경향을 나타냈으며 굴지성에 반하여 비커안으로 자라는 현상을 나타냈다. 토마토 수량 및 질소흡수량을 고려할 때 7.5 g의 석고를 점결제로 사용하고, C/N율이 16인 부엽퇴비 및 점질토양을 확산완충제로 비커에 충진하여 제조한 시제품이 가장 좋은 처리로 판단되었다.

• 한국레이저가공학회지
• /
• 제3권1호
• /
• pp.38-45
• /
• 2000

A 4㎾ RS840 CO2 laser with a powder auto-feeding apparatus has been used to deposit multiple overlapping tracks of Ni-base superalloy on to low carbon steel. It was found that the surface roughness(turbulence) of an overlapped cladding layer decreased with the increase of the overlapping ratio in an oscillating manner. When the overlapping ratio had values of 0.62, the surface turbulence was lowest. Overlapping ratio offer significant potential for improvement of materials surface properties such as corrosion performance and wear resistance. This paper reports that the overlapping ratio shows best corrosion resistance. The tensile residual stresses generated at the higher overlapping ratio( ＞ 0.45) and the element concentration of Fe increased in the surface layer at the lower overlapping ratio( ＜ 0.45) may lead to worse corrosion resistance.

• 대한가정학회지
• /
• 제37권2호
• /
• pp.127-144
• /
• 1999

The purposes of this study were to identify the housing maintenance cost, imputed rent fee and total housing cost of households living in rental house, to analyze the factors related to their housing maintenance cost, imputed rent fee and total housing cost and to investigate the factors contributing to total housing cost to total household income ratio. The data used for these purposes, was 97 KHPS of Daewoo Economic Research Institute. Sample size of households living in rental house, was 663. Statistics performed for the analysis were frequencies, percentiles, t-test, Lorenz cutie and Gini coefficient, Tobit analysis, OLS and Logistic analysis. The results of this study were as fellows: First, monthly cost of monthly rent & maintenance and repairs of households living in rental house with a deposit was lower than rental house, while the imputed rent fee of households living rental house with a deposit was higher than monthly rent households'And, total housing cost of households living in rental house with a deposit was higher than monthly rent households'. Second, Gini coefficient of the housing maintenance cost was 0.440, Gini coefficient of imputed rent fee was 0.362, and Gini coefficient of total housing cost was 0.291. Third, the variables related to their housing maintenance cost were family type, total household expenditure of socio-demographic characteristics and residence, type of rent, housing type of housing environmental factor. Also, the variables contributing to imputed rent fee were job type and educational attainment of household hearts, the number of family members, total household expenditure, residence, type of rent, housing type and tole number of rooms. In addition, the variables associated with total housing cost were job type and educational attainment of household head, total household income and residence, type of rent, housing type and the number of room. Finally, age, job type, educational attainment of household head, wife's employment status, the number of family members, family type, total household expenditure, residence, rent type of rent, housing type, the size of living space, and the number of room were significant variables contributing to total household cost to total household income ratio.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.63-72
• /
• 2020

Shadow banking in China has been growing rapidly; banks use wealth management products aggressively to evade regulatory constraints. The loan-to-deposit ratio or LDR targets both sides of the balance sheet; loans in terms of asset-side, and deposits in terms of liabilities-side; banks needed to control and maintain both sides. Regulators restricted Chinese banks to maintain a 75% limit for their loan-depositratio. Banks' needed to either lower their loans or increase the deposits; WMPs helped banks to evade this limit. Banks issue more WMPs to control and manage a 75% statutory ceiling LDR. This WMPs-LDR positive association disappeared post-2015 period. This study empirically examined how Chinese banks use WMPs issuance to avoid regulatory constraints. Quarterly panel data for 30 top Chinese banks were used by analyzing pre-2015 (during the 75% LDR limit) and post-2015 (after removal of the LDR limit). This study also performed fixed-effects model as recommended by the Hausman specification test, with feasible generalized least squares FGLS estimation technique. The results of this study show that for the pre-2015 period, Chinese banks use issuance of WMPs aggressively to manage their LDR limit; this WMPs-LDR relationship disappeared post-2015 period. Moreover, SMBs use WMPs more eagerly as compare to Big4 banks.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.300-309
• /
• 2010

Melamincyanurate(MC), as an non halogen flame retardant are used as the polymer and plastic materials. In this study, melamine and cyanuric acid were used for the synthesis of MC. The optimum condition of synthetic MC were controlled by different molar ratio of melamine to cyanuric acid. MC was modified by coupling reaction with four different agents. The influences of modified MC were based on the coupling agent types. Preparation methods are available to offer the prospect of improved morphology control deposit stability in polyol. The results reveal that glycidoxypropyltrimethoxysilane(GDS) has the best storage stability. The best properties were obtained with melamine and cyanuric acid from 1:1 molar ratio. Modification of MC through coupling agent can efficiently enhanced the deposit stability in polyol up to 30 %.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.196-197
• /
• 2005

Cathodic protection is one of the successful ways to prevent corrosion of steel structures in marine environments. The unique feature of cathodic protection in seawater is the formation of calcareous deposits on cathodic metal surface. The formation principles of calcareous deposit seawater had been known for a long time. That is, cathodic reduction reactions associated with cathodic protection in seawater generate $OH^-$ at the metal surface in accordance with the formular ; 1/2 $O_2$ + $H_2O$ + $2e^-$ $2OH^-$ and $2H_2O$ + $2e^-$ ${\rightarrow}$ $H_2$ + $2OH^-$. These reactions increase the pH at the metal / seawater interface. The high pH causes precipitation of $Mg(OH)_2$ and $CaCO_3$ in accordance with the formular ; $Mg^{2+}$ + $2(OH)^-$ ${\rightarrow}$ $Mg(OH)_2$ and $Ca^{2+}$ + $HCO_3^-$ + $OH^-$ ${\rightarrow}$ $H_2O$ + $CaCO_3$. These are typically the main compounds in calcareous deposits. It obviously has several advantages compared to the conventional coatings, since the environment-friendly calcareous deposit coating is formed by the elements($Mg^{2+}$, $Ca^{2+}$) naturally present in seawater. In this study, environmental friendly calcareous deposit films were prepared on steel plates by electro plating technic in natural seawater. The influence of current density on composition ratio, structure and morphology of the coated films were investigated by scanning electron microscopy formation process of calcareous deposits films in natural seawater. And we confirmed the properties of all the films can be improved greatly by controlling the material structure and morphology with effective use of the electroplating method in natural seawater.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 준설 및 환경매립에 관한 학술세미나
• /
• pp.3-11
• /
• 1999

It has been said from previous studies that the preconsolidation pressure (p$\sub$c/)of Nangton Rive. deposit is considerably less than the in situ effective burden pressure (p'$\sub$$\upsilon$ο/). Question has risen whether this small pc vale is due to under consolidation or unsuitable laboratory test including low small quality. As a cooperative research program between PHRI (Port and Harbor Research Institute) and Pusan National University, an extensive soil investigation was carried out at a site of Yangsan, Pusan, using the Japanese sampler. It Is found that although p$\sub$c/ value at the site is slightly greater than p'$\sub$$\upsilon$ο/, its over consolidation ratio (OCR) is quite small compared with aged normally consolidated clay in Japan.

• 청정기술
• /
• 제11권4호
• /
• pp.181-188
• /
• 2005

밸브 내부의 입자들의 화울링 현상의 제어 및 저감을 위해 공기분사 방식을 적용하는 새로운 분립체용 볼 밸브를 개발하였다. 밸브 내부의 분립체와 분사공기 흐름간의 상호작용 및 화울링 현상에 대한 규명을 위해 전산유체역학적 해석을 수행하였고, 해석결과들을 밸브 형상 및 공기분사 조건 설계에 반영하였다. 설계된 분립체용 볼 밸브의 실제 시험을 통해, 본 볼 밸브가 여러 운전 조건들에 대해서 우수한 화울링 저감효과를 가짐을 알 수 있었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.209-211
• /
• 2005

Super duplex stainless steels have been used for offshore oil and gas piping systems which are subject to corrosion atmosphere, because they have excellent resistance to Stress Corrosion Cracking (SCC) and Pitting corrosion and high strength/weight ratio. Normally, the welding for duplex stainless steels has been peformed using GTAW with Ar shielding gas. However, in case of using Ar as shielding gas, the corrosion resistance at root weld metal will be deteriorated due to loss of nitrogen from weld deposit during welding. It is wellknown that the corrosion resistance of super duplex stainless can be restored by addition of nitrogen as shielding gas. In this study, we made super duplex welding with using several kinds of shielding and purging gases and investigated the relationship between shielding gas and corrosion resistance. Consequently, it was shown that corrosion resistance of weld deposit can be restored by addition of $N_{2}$ as shielding gas.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.75.1-75.1
• /
• 2013

Atomic layer deposition (ALD) and molecular layer deposition (MLD) are based on sequential, self-limiting surface reactions that produce atomic layer controlled and conformal thin film growth. ALD can deposit inorganic films and MLD can deposit films containing organics. ALD and MLD can be used together to fabricate a wide range of hybrid organic-inorganic alloy films. The relative fraction of inorganic and organic constituents can be defined by controlling the ratio of the ALD and MLD reaction cycles used to grow the film. These hybrid films can be tuned to obtain desirable mechanical, electrical and optical properties. This talk will focus on the growth and properties of metal alkoxide films grown using metal precursors and various organic alcohols that are known as "metalcones". The talk will highlight the tunable mechanical properties of alucone alloys grown using Al2O3 ALD and alucone MLD and the tunable electrical conductivity of zincone alloys grown using ZnO ALD and zincone MLD with DEZ and hydroquinone as the reactants.