• Title/Summary/Keyword: Dentistry user

Search Result 38, Processing Time 0.04 seconds

다양한 임플란트 엔진 시스템에 대한 사용자 만족도 비교 (The comparative study of user satisfaction on various implant engine system)

  • 이두형;이규복
    • 구강회복응용과학지
    • /
    • 제30권1호
    • /
    • pp.9-15
    • /
    • 2014
  • 목적: 임플란트 엔진 시스템은 임플란트 시술 과정에서 사용하며 핸드피스, 구동모터, 본체, 그리고 풋스위치로 구성되어 있다. 본 연구의 목적은 임플란트 엔진 시스템의 편의성, 디자인 그리고 전체 만족도를 평가하고, 임플란트 식립 경험와 평가와의 관련성을 조사하고자 하였다. 연구 재료 및 방법: 총 30명의 치과의사를 대상으로 구조화된 설문지를 통해 3개 제조사의 시스템(NSK 의 SurgicXT와 X-SG20L, KaVo의 INTRAsurg300와 CL3-09, Saeshin의 XIP10와 CRB26LX)의 편의성, 디자인, 만족도를 비교 연구의 방식으로 조사하였다. 통계분석은 일원배치 분산분석과 중회귀분석을 이용하였다. 결과: 전체 만족도는 각기 다르게 나타났고(P < 0.05), 전체 만족도에는 편의성 평가가 디자인 평가보다 더 큰 영향을 미쳤다. 임플란트 수술 경험의 정도와 일부 영역의 평가와는 관련이 있었다. 결론: 임플란트 엔진 시스템의 횡단적 단면 평가 시에 디자인이 전체 만족도에 영향을 미치고, 임플란트 식립 횟수는 평가 시 영향력 있는 인자가 될 수 있음을 관찰할 수 있었다.

Air-jet기능을 장착한 멀티형 복합유닛 핸드피스의 사용 만족도 조사 (A study on the usage satisfaction of multi-type handpieces with equipped air-jet function)

  • 김임선;최병환
    • 대한치과기공학회지
    • /
    • 제37권3호
    • /
    • pp.169-178
    • /
    • 2015
  • Purpose: This study was to investigate usage satisfaction of multi type handpiece with equipped air-jet function Methods: The subjects of this study through the survey was conducted for fifty-nine dental technicians in Daegu and Gyeongsangbukdo from the May 7 to 19, after the June 23 to July 4 2014. The survey was about the function and quality through user testing environment by cutting zirconia specimens using appliance for zirconia. The collected date was analyzed by the statistical program SPSS Win Ver 19.0 for the satisfaction of handpiece and control system. To test for significance on each item, p<0.05 had been decided a standard. General characteristics and relationship between the handpiece and control system was performed correlation analysis. Results: The results of this study is as follows. 35 dental technicians had 1~2 years career in zirconia part as the highest 59.3%, 95% of subjects expected that the prospects for the zirconia material have bright prospects. The satisfaction of multi type handpiece and control system design and function showed a significant difference. Subjects satisfied with the design and function of the multi type showed negative correlation with those of Standard. The satisfaction of multi type handpiece showed 3.37 points of air jet, 3.05 points of noise level, 2.69 points of water flow rate, and 1.98 points of cruise function. Sample differences in all parameters showed a statistically higher difference. Conclusion: High-speed cutting mechanism of multi-type is recommended working with zirconia materials and the multi-type unit combined handpiece motor, air-turbine and air-gun will be expected the increase of user due to the high satisfaction of air jet.

치기공과 교육과정의 개선방안 (An improvement plan of Curriculum in Departments of Dental Technology)

  • 배봉진;이화식;박병호
    • 대한치과기공학회지
    • /
    • 제31권4호
    • /
    • pp.55-66
    • /
    • 2009
  • This research collected the curriculum for Dental Technology from a total of 20 schools --3-year colleges and 4-year colleges-- all in Korea. And we analyzed the average credits of subjects from students. As a result of this analysis, we get the conclusion below: 1. In the arithmetic mean of the major basis subjects which graduates and undergraduates answered about each subjects; Seminar, Dental morphology I II, Dental morphology practice I II, and Dental devices & instruments don't have many credits. And averages of the major application subjects credits which are Implants(especially low), Occlusal anatomy practice I II, Dental ceramics practice I II, and Dental ceramics practice are low, mostly have a converged tendency in high points. 2. In an analysis of the correlation which is based on the major basis subjects: Dental esthetic, oral anatomy I II, Dental materal practice III, Dental casting pracedure, Oral hygiene, Health & medical law, Management administration, and Medical terminology have a meaningful difference. (${\rho}$ < 0.05) 3. In an analysis of the correlation which is based on the major application subjects; Crown and bridge prosthodontics practice IV, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Dental ceramics I II, Dental ceramics practice I II, Dental ceramics practice IIII, Occlusal anatomy I II, Occlusal anatomy practice I, Operative dentistry laboratory technology I, Operative dentistry laboratory technology practice II, Dental attachment laboratory technology practice, Implants, and Dental laboratory clinical practice have meaningful difference. (${\rho}$ < 0.05) 4. In an analysis of the correlation which is based on the ratio of a theory to an actual training; 40:60(38.57%) is the highest, followed by 30:70(30.04%), 50:50(23.32%), 60:40(5.83%), and 70:30(2.24%). These have meaningful difference. (${\rho}$ < 0.05) 5. In an analysis of the correlation which is based on the distinction of sex: Partial denture prosthodontics practice I II III, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Occlusal anatomy practice I II, Implants, Medical terminology have meaningful difference. (${\rho}$ < 0.05) For the purpose of training entrepreneurs of middle standing who is required by a future society, Department of Dental Technology's Curriculum need to be managed with planning a curriculum which reflects opinions of graduates, undergraduates and a society, and also are considered not focusing on a supplier but focusing on a user.

  • PDF

두 종류 치과 임플란트 캐드 소프트웨어의 사용자 편의성 및 만족도 비교 (Evaluating usability of and satisfaction with two types of dental CAD software)

  • 김성민;이완선;손큰바다;이규복
    • 구강회복응용과학지
    • /
    • 제35권1호
    • /
    • pp.11-19
    • /
    • 2019
  • 목적: 치과 임플란트 캐드 소프트웨어를 사용해 본 경험자와 무경험자에 의한 두 종류 캐드 소프트웨어의 사용자 편의성 및 만족도를 평가하는 것이다. 연구 재료 및 방법: 치과 임플란트 캐드 소프트웨어에 경험이 있는 20명의 치기공사와 캐드 소프트웨어를 사용해보지 않은 12명의 경북대학교 치과대학 학생에게 두 종류의 캐드 소프트웨어(ExoCad, Deltanine)를 이용하여 임플란트 맞춤 지대주(implant custom abutment)를 디자인하도록 하였다. 그리고 구조화된 설문지(1단계: 기본 정보 및 파일 불러오기, 2단계: 지대주 디자인 전 조건 설정, 3단계: 지대주 디자인 설정, 4단계: 전체적인 만족도)를 작성하도록 하였다. 수집된 자료의 통계분석은 Mann-Whitney U test를 사용하였다(${\alpha}=.05$). 결과: 4단계로 나누어 진 21개 문항에 대해 평가된 치과 임플란트 캐드 소프트웨어의 디자인 편의성과 만족도는 1단계의 두 문항에서 모두 Exocad 소프트웨어에서 유의하게 높았습니다. 2단계 및 3단계의 경우 경험이 있는 참가자는 Deltanine 소프트웨어가 훨씬 뛰어나다고 평가했습니다. 4단계에서는 두 문항 모두 Exocad 소프트웨어에서 높은 평가를 받았습니다. 결론: 2 종류 치과 임플란트 캐드 소프트웨어의 편의성 및 만족도 조사에서 Exocad 소프트웨어가 전체적으로 높은 평가를 받았다. 하지만 디자인 과정 중 핵심인 2, 3단계에서 유경험자는 Deltanine 소프트웨어를 높게 평가하였다. 따라서 그외 부분을 보강하면 Deltanine 소프트웨어는 임상에서 널리 사용될 수 있을 것이다.

Smokeless Tobacco (Shammah) in Saudi Arabia: A Review of its Pattern of Use, Prevalence, and Potential Role in Oral Cancer

  • Alsanosy, Rashad Mohammed
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권16호
    • /
    • pp.6477-6483
    • /
    • 2014
  • Background: Shammah is a traditional form of chewing tobacco [smokeless tobacco, (ST)] that is commonly used in the Middle East especially in Saudi Arabia (KSA), Yemen and Sudan. The Substance Abuse Research Centre (SARC) at Jazan University noted that no adequate research and information on the prevalence of shammah use in the province of Jazan, and KSA as well, has been provided in the scientific literature. Materials and Methods: An intensive systematic review of online databases was performed, including AMED (The Allied and Complementary Medicine Database), Biological Abstracts, Cochrane Collection Plus, Dentistry and Oral Sciences Source, E-Journals Database, EBSCO Discovery Service, MEDLINE, PEMSoft, PEP Archive, PsycARTICLES, scopus, Sciencedirect and Google Scholar. Results: Shammah is a mixture of powdered tobacco, lime, ash, black pepper, oils and flavorings. ST in KSA is placed in the buccal or lower labial vestibule of the mouth. The user (or dipper) spits out insoluble debris. The importation of ST products is prohibited in KSA. Accessible information on legislative action to control the use of ST in KSA appeared in 1990. The actual percentage use may be higher, than reported since shammah is illegal in KSA and there may be some reluctance to admit to its use. Conclusions: This review paper is an initial step in a funded research project by SARC to understand the pattern of use of shammah and provide adequate epidemiological data. One goal of this review is to generate further data for public health education.

Research and development of haptic simulator for Dental education using Virtual reality and User motion

  • Lee, Sang-Hyun
    • International Journal of Advanced Culture Technology
    • /
    • 제6권4호
    • /
    • pp.52-57
    • /
    • 2018
  • The purpose of this paper is to develop simulations that can be used for virtual education in dentistry. The virtual education to be developed will be developed with clinical training and actual case data of tooth extraction. This development goal is to allow dental students to learn the necessary surgical techniques at the point of their choice, not going into the operating room, away from time, space, and physical limits. I want to develop content using VR. Oculus Rift HMD, Optical Based Outside-in Tracking System, Oculus Touch Motion Controller, and Headset as Input / Output Device. In this configuration, the optimization method is applied convergent, and when the operation of the VR contents is performed, the content data is extracted from the interaction analysis formed in the VR engine, and the data is processed by the content algorithm. It also computes events and dental operations generated within the 3D engine programming and generates corresponding events through data processing according to the input signal. The visualization information is output to the HMD using the rendering information. In addition, the operating room environment was constructed by studying lighting and material for actual operating room environment. We applied the ratio of actual space to virtual space and the ratio between character and actual person to create a spatial composition at a similar rate to actual space.

일부 4년제 치기공학과 학생이 인지한 현장실습교육환경(FLE)에 관한 연구 (A Study on Some 4-year Dental Technology Students Perceptions of Field Learning Environment(FLE))

  • 황경숙
    • 대한치과기공학회지
    • /
    • 제41권2호
    • /
    • pp.137-146
    • /
    • 2019
  • Purpose: This research was to examine some 4-year dental technology students perceptions of field learning environment(FLE). Methods: This study was conducted from October 15th to November 30th, 2017. 163 copies were used as the final analysis data. We surveyed questionnaire 163 of some 4-year dental technology students. The collected data were analyzed using SPSS (Statistical Package for Social Science) 22.0 for windows, and frequency analysis, chi-square test analysis, and correlation analysis were performed. Results: Satisfaction of practicing educator 3.88, satisfaction of clinical practice 3.49, major satisfaction 3.34, and university life satisfaction 3.25. Factors influencing satisfaction with clinical practice were clinical practice place, number of clinical practice sites, work done in clinical practice, and difficulties (p < .05). There was a significant positive correlation between satisfaction with clinical practice and satisfaction with major (P < .05). Conclusion: The results of this study, we were able to check the current field learning environment(FLE) and actual condition of students. Through the investigation of the desired clinical practice, it is anticipated that it will be possible to provide a field learning environment suitable for the course of the field desired by the user.

Optical Coherence Tomography Applications for Dental Diagnostic Imaging: Prototype System Performance and Preclinical Trial

  • Eun Seo Choi;Won-Jin Yi;Chang-Seok Kim;Woosub Song;Byeong-il Lee
    • Current Optics and Photonics
    • /
    • 제7권3호
    • /
    • pp.283-296
    • /
    • 2023
  • An intraoral spectral domain optical coherence tomography (SD-OCT) system has been developed, using a custom-built hand-held scanner and spectrometer. The hand-held OCT probe, based on a microelectromechanical systems scanner and a self-built miniaturized drive circuit, had a field of view sufficient for dental diagnosis. The spectrometer using a fabricated f-theta lens provided the image depth required for dental diagnosis. The axial and transverse resolutions of the OCT system in air were 7.5 ㎛ and 12 ㎛ respectively. The hand-held probe could scan an area of 10 × 10 mm2, and the spectrometer could image along a depth of 2.5 mm. To verify the utility of the developed OCT system, OCT images of tooth hard and soft tissues were acquired, and a user-interface program for diagnosis was developed. Early caries and microcracks that were difficult to diagnose with existing methods could be found, and the state of restoration could be observed. Measuring the depth of the gingival sulcus, distinguishing subgingival calculus, and detecting an implant under the gingiva suggested the possibility of the SD-OCT system as a diagnostic for dental soft tissues. Through the presented OCT images, the capability of the developed SD-OCT system for dental diagnosis was demonstrated.

수도권 거주환자의 구강건강인식과 그 연관요인 (The Oral Health Perception and its Related Factor by the Patients in Metropolitan Area)

  • 정의정;김민영
    • 치위생과학회지
    • /
    • 제7권4호
    • /
    • pp.213-218
    • /
    • 2007
  • 본 연구에서는 구강건강인식과 구강건강염려가 구강보건인식 및 스켈링 행태에 어떠한 영향을 미치는가를 알아보고자 하였다. 이를 위해 조사대상은 서울 강남에 위치한 치과의원 2개소와, 강북에 위치한 2개소, 분당지역의 치과대학부속병원을 내원한 만 18세 이상 환자들을 대상으로 하였으며, 2006년 4월 5일부터 4월 28일까지 자기기입식 설문조사를 실시하고, 291부를 SPSS 12.0 통계프로그램을 이용하여 분석하였다. 이에 그 결과를 분석한 바, 다음과 같은 결론을 얻었다. 1. 자신의 구강상태를 건강하지 않다고 인식한 비율이 45.0%로 가장 높았고, 성별에 따라서는 여성(44.1%)에 비해 남성(46.3%)이 건강하지 못하다고 인식하는 비율이 조금 높았다. 2. 자기구강건강인식이 부정적 일수록 진료기관 선택을 친지 등의 권유(55.1%)에 의존하는 비율이 높았고, 구강건강염려정도는 항상 걱정한다는 응답률이 45.0%로 보통(15.1%)이거나 건강한 편(11.9%)이라고 인식하는 대상자와 유의한 차이를 보였다(P < 0.05). 3. 자기구강건강인식에 따른 잇솔질 횟수는 매식 후 3회 응답률이 건강한 편이 44.8%, 보통이 47.3%, 건강하지 못한 편이 41.2%로 큰 차이가 없었으나 4회 이상은 건강한 편이 26.9%로 가장 높았고, 보통이 9.7%, 건강하지 못한 편이 15.3%로 유의한 차이를 보였다. 4. 구강건강염려정도는 가끔 걱정함이 66.0%로 가장 높았고, 남녀차이는 유의하지 않았으나 연령별로는 연령이 높아질수록 항상 걱정함의 응답률이 유의하게 높아졌다(P < 0.05). 5. 구강건강염려정도가 '항상 걱정함'인 응답자 93.8%가 스켈링 경험이 있었고, 그 중 정기적인 스켈링을 하는 대상자는 65.8%로 '가끔 걱정함' 49.7%, '걱정하지 않음' 46.2%와 유의한 차이를 보였으며, 정기검진을 받고 있는 대상자도 55.6%로 '가끔 걱정함' 45.3%, '걱정하지 않음' 33.3%보다 높았다. 또한 아플 경우 미루지 않고 치과병의원을 내원하는 율도 71.6%로 유의한 차이를 보였다(P < 0.05). 고령화 사회로 진입한 현실에서 구강건강의 중요성과 삶의 질에 미치는 영향에 대한 인식이 증가되고 있다. 이에 실질적인 국민의 구강건강관련 삶의 질 증진을 위해 구강건강인식도를 적극 활용하여 치과치료의 필요도를 탐색하거나, 치료의 평가에 적극 활용함이 필요하다고 여겨진다.

  • PDF

두가지 피에조 엔진의 사용자 만족도 비교 (A comparative study on the user satisfaction between two different piezoelectric engines)

  • 임현미;이규복;이완선;최소영
    • 구강회복응용과학지
    • /
    • 제33권4호
    • /
    • pp.269-277
    • /
    • 2017
  • 목적: 치과의사의 사용 만족도 비교를 통해 두 가지 피에조 엔진의 성능을 비교평가 하고자 한다. 연구 재료 및 방법: 본 연구에서는 두 가지의 피에조 엔진을 평가하였다:TRAUS XUS10 (Saeshin), PIEZOSURGERY touch (Mectron). 20명의 치과의사가 11개 평가항목에 답하였고, 평가결과는 Likert의 5점 척도를 적용하여 수치화하였다. 핸드피스 소음평가는 10초 동안 5회 측정하여 최고소음을 비교하였다. 핸드피스 발열평가는 세 부위에서 3분동안의 발열량을 측정하였다. 결과: 평가항목 중 '주수펌프 모터의 소음'에서 TRAUS XUS10이 PIEZOSURGERY touch보다 유의하게 만족도가 높았다. 반면, '기능key의 만족도'와 '핸드피스 발열정도'는 PIEZOSURGERY touch가 더 우수했다. 소음 최대값은 TRAUS XUS10이 56.6 dB, PIEZOSURGERY touch는 56.0 dB였다. 두 기기 모두 3분 작동 후 $41^{\circ}C$ 미만의 열을 발생시킴으로써 안전기준을 만족하였다. 결론: TRAUS XUS10는 '기능 key' 및 '핸드피스 발열정도'에서 약간의 개선을 한다면 그 외 대부분의 평가항목에서는 PIEZOSURGERY touch과 견줄만한 성능을 보인다.