• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.2
• /
• pp.183-193
• /
• 2013

The characteristics of dental treatment makes the dental staff frequently contact with patient directly. Also the daily use of high-handpieces, sharp instruments, and needles often causes bleeding on oral cavity. Therefore, the risk of cross transmission grows up. The pathogen from dental practice could spread on not only the practice itself but also the dental laboratory with contaminated impressions and prosthesis. Dental clinic staffs (dentists, dental hygienists and dental technicians) should recognize all the patients have a possibility of cross contamination, and try to prevent the transmission of infection by proper infection control. In this study, we review the articles about disinfection methods and chemical infection agents used for dental impressions, and try to figure out the suitable and effective infection control system of dental impressions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.3
• /
• pp.174-182
• /
• 2020

Objectives: Joint injuries frequently lead to progressive joint degeneration that causes articular disc derangement, joint inflammation, and osteoarthritis. Such arthropathies that arise after trauma are defined as post-traumatic arthritis (PTA). Although PTA is well recognized in knee and elbow joints, PTA in the temporomandibular joint (TMJ) has not been clearly defined. Interestingly, patients experiencing head and neck trauma without direct jaw fracture have displayed TMJ disease symptoms; however, definitive diagnosis and treatment options are not available. This study will analyze clinical aspects of PTA in TMJ and their treatment outcomes after joint arthrocentesis and lavage. Materials and Methods: Twenty patients with history of trauma to the head and neck especially without jaw fracture were retrospectively studied. Those patients developed TMJ disease symptoms and were diagnosed by computed tomography or magnetic resonance imaging. To decrease TMJ discomfort, arthrocentesis and lavage with or without conservative therapy were applied, and efficacy was evaluated by amount of mouth opening and pain scale. Statistical differences between pre- and post-treatment values were evaluated by Wilcoxon signed-rank test. Results: Patient age varied widely between 20 and 80 years, and causes of trauma were diverse. Duration of disease onset was measured as 508 post-trauma days, and 85% of the patients sought clinic visit within 2 years after trauma. In addition, 85% of the patients showed TMJ disc derangement without reduction, and osteoarthritis was accompanied at the traumatized side or at both sides in 40% of the patients. After arthrocentesis or lavage, maximal mouth opening was significantly increased (28-44 mm on average, P<0.001) and pain scale was dramatically decreased (7.8-3.5 of 10, P<0.001); however, concomitant conservative therapy showed no difference in treatment outcome. Conclusion: The results of this study clarify the disease identity of PTA in TMJ and suggest early diagnosis and treatment options to manage PTA in TMJ.

• The KIPS Transactions:PartB
• /
• v.11B no.2
• /
• pp.133-140
• /
• 2004

Recently, the dental information systems were rapidly developed in order to store and process the data of patients. But, these systems should serve a doctor a good quality information against disease for diagnostic and surgery purpose so as to success in this field. This function of the system it important to persuade patients to undergo proper surgical operation they needed. Hence, 3D teeth model capable of simulating the dental surgery and treatment is necessary Teeth manipulation of dentistry is performed on individual tooth in dental clinic. io, 3D teeth reconstruction system should have the techniques of segmentation and 3D reconstruction adequate for individual tooth. In this paper, we propose the techniques of adaptive optimal segmentation to segment the individual area of tooth, and reconstruction method of tooth based on contour-based method. Each tooth can be segmented from neighboring teeth and alveolar bone in CT images using adaptive optimal threshold computed differently on tooth. Reconstruction of individual tooth using results of segmentation can be manipulated according to user's input and make the simulation of dental surgery and treatment possible.

• The Korean Journal of Pain
• /
• v.26 no.1
• /
• pp.21-26
• /
• 2013

Background: Postherpetic neuralgia (PHN) is a serious complication resulting from herpes zoster infections, and it can impair the quality of life. In order to relieve pain from PHN, various treatments, including pharmacological and interventional methods have been used. However, little information on the recommendations for the interventional treatment of PHN, along with a lack of nation-wide surveys on the current status of PHN treatment exists. This multicenter study is the first survey on the treatment status of PHN in Korea. Methods: Retrospective chart reviews were conducted on the entire patients who visited the pain clinics of 11 teaching hospitals from January to December of 2011. Co-morbid disease, affected site of PHN, routes to pain clinic visits, parenteral/topical medications for treatment, drugs used for nerve block, types and frequency of nerve blocks were investigated. Results: A total of 1,414 patients' medical records were reviewed. The most commonly affected site was the thoracic area. The anticonvulsants and interlaminar epidural blocks were the most frequently used pharmacological and interventional methods for PHN treatment. For the interval of epidural block, intervals of 5 or more-weeks were the most popular. The proportion of PHN patients who get information from the mass media or the internet was only 0.8%.The incidence of suspected zoster sine herpete was only 0.1%. Conclusions: The treatment methods for PHN vary among hospitals. The establishment of treatment recommendation for PHN treatment is necessary. In addition, public relations activities are required in order to inform the patients of PHN treatments by pain clinicians.

• The Journal of Korean Society for School & Community Health Education
• /
• v.15 no.3
• /
• pp.67-80
• /
• 2014

Objectives: This study is aimed to analyze the influential factors on the fear that college students and elderly people feel during the dental treatment and provide basic data needed to develop a plan which can lead them to have a positive perspective on dentistry. Methods: A questionnaire was distributed to 241 outpatients (39 college students, 202 elderly people) visiting dental clinic of 'K' University Hospital in Seoul from January to April, 2013. It was filled in a self-administered manner and collected right away. Results: factor analysis, three factors were configured when the factors with 1.0 or higher of eigenvalue were extracted using 19 questions through which dental fear and anxiety were measured against college students and elderly people. The questionnaires were classified into three categories: Factor I (stimulus response), Factor II (avoidance of the treatment) and Factor III (physiological response which occurs when a patient feels fear). As a result, it was confirmed that the questionnaire tool is highly feasible. In college students, the responses they felt during the dental treatment in the said three factors were as follows: 52.00% in Factor II, 14.14% in Factor II and 6.99% in Factor III (73.129% in total). In elderly people, on the contrary, they were 52.41% in Factor I, 10.57% in Factor II and 7.98% in Factor III (70.958% in total), lower than the college student group. Conclusions: This study is significant in that it confirmed complex relations between dental fear and related variables against college students and elderly people.

• Journal of Technologic Dentistry
• /
• v.43 no.3
• /
• pp.124-131
• /
• 2021

Purpose: This study aimed to investigate the perception of dental implant insurance supply and demand for the elderly living in Hongseong-gun and Chungcheongnam-do, as well as the selection criteria regarding dental clinics for dental implant treatment to collect basic data for improving the oral health of the elderly population. Methods: Participants living in Hongseong-gun, Chungcheongnam-do who were at least 55 years old from November 2020 to March 2021 were included in this study. The chi-square test was performed to examine the age-specific perception of insurance-covered dental implants (p<0.05). Results: The age group that was the most interested in implants was the 70s age group, and the difference between this age group and the other age groups was statistically significant. Those in their 70's, 80's, and 90's or older paid about 600,000 won including dental implants covered by insurance, and there was a significant difference (p<0.05). Those in their 60s, 70s, and 80s estimated the highest value of implants covered by insurance as two and showed a significant difference (p<0.05). The awareness of the dental implant insurance by age showed that all age groups, except for the ≥90 years age group, considered the insurance to be mediocre mostly due to the large co-payment (p<0.05). Conclusion: There were differences by age in the awareness of dental implant insurance, co-payments, number of applications, and insurance coverage. The perceptions on dental implant insurance by age showed that all age groups except for those over 90 years and older, they considered the insurance was just mediocre the most.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.4
• /
• pp.192-198
• /
• 2019

Objectives: Oral and maxillofacial surgeons must gain mastery of various approaches to the midface due to the increasing incidence, complexity, and severity of presenting midfacial fractures. Unlike in the case of other body parts, the need to preserve facial aesthetics makes it more difficult for the surgeon to select an approach for managing the facial injuries. The midfacial degloving (MFD) approach is a combination of intraoral and intranasal incisions made to access the midface without any external incision. The aim of the present study was to evaluate the efficacy of MFD in maxillofacial surgery and to assess its advantages and complications. Materials and Methods: The MFD approach was used in five cases, with three cases treated with open reduction and internal fixation and two cases operated on for posttraumatic deformity. Nasal dorsum augmentation was completed in three cases and nasal osteotomy was performed in one case. The bicoronal flap technique was combined with MFD for frontal bone augmentation in one case. The intraoperative time required for flap completion and the ease of performing the planned procedures were noted. Postoperative evaluation was done for reduction, aesthetics, function, and complications. Results: Access was excellent for performing all planned procedures. Average time spent for flap elevation and exposure of the midface was 63 minutes. Complications like postoperative swelling, infraorbital nerve paresthesia, and intranasal crusting were all transient. No long-term complications like stenosis of the nose, sneer deformity, or weakness of the facial muscles were noticed. Additionally, no complications were noted when MFD was combined with bicoronal flap. Conclusion: Though the MFD approach is technically demanding and takes more time than other facial approaches, it should be learned and applied by maxillofacial surgeons in selective cases, as it provides complete exposure of the midface without facial scarring.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.15 no.1
• /
• pp.7-13
• /
• 2019

The aim of this study was to clarify the barriers of dental treatment for special needs patients felt by dentists and to determine the dentist-related factors contributing to the obstacles in treatment planning and decision making. Questionnaires were distributed and responded by dentists working at five public-based special care clinics in South Korea. Factors divided into three parts (dentist demographics, clinical factors, and educational and administrational factors) were assessed and analyzed for correlations between dentist-related factors and dentist-felt burdens for special care treatment. Fisher's exact test and Chi-square test were used at the level of 0.05. A total of 34 dentists responded to the questionnaires. Almost all dentists had obstacles in the treatment of special needs patients in terms of the patients' lack of cooperation (94.1%), proxy communication with caregivers (94.1%), payment reward system (63.6%), deficient workforce (67.7%), and others. The longer dentists had been practicing for special needs patients, the more they were dissatisfied with the reward system and a longer time was spent for communication with patients and their caregivers (p<0.05). For specialists, more obstacles were experienced in treatment planning due to a deficiency in the clinical information obtained from their patients compared to general practitioners (p<0.05). A total of 82.4% of the respondents approved of mandatory educational programs for special care dentists. There were practitioner-based factors related to the amount of obstacles felt by special care dentists. To overcome the treatment barrier of special needs patients, in-depth education and training are required in special care dentistry.

• Imaging Science in Dentistry
• /
• v.51 no.2
• /
• pp.137-148
• /
• 2021

Purpose: This study aimed to assess the computer monitors used for analysis and interpretation of digital radiographs within the clinics of the Oral Health Centre of Western Australia. Materials and Methods: In total, 135 computer monitors(3 brands, 6 models) were assessed by analysing the same radiographic image of a combined 13-step aluminium step wedge and the Artinis CDDent 1.0^® (Artinis Medical Systems B.V.^®, Elst, the Netherlands) test object. The number of steps and cylindrical objects observed on each monitor was recorded along with the monitor's make, model, position relative to the researcher's eye level, and proximity to the nearest window. The number of window panels blocked by blinds, the outside weather conditions, and the number of ceiling lights over the surgical suite/cubicle were also recorded. MedCalc^® version 19.2.1 (MedCalc Software Ltd^®, Ostend, Belgium, https://www.medcalc.org; 2020) was used for statistical analyses(Kruskal-Wallis test and stepwise regression analysis). The level of significance was set at P<0.05. Results: Stepwise regression analysis showed that only the monitor brand and proximity of the monitor to a window had a significant impact on the monitor's performance (P<0.05). The Kruskal-Wallis test showed significant differences (P<0.05) in monitor performance for all variables investigated, except for the weather and the clinic in which the monitors were placed. Conclusion: The vast performance variation present between computer monitors implies the need for a review of monitor selection, calibration, and viewing conditions.

• Imaging Science in Dentistry
• /
• v.51 no.1
• /
• pp.41-47
• /
• 2021

Purpose: This study aimed to compare the accuracy of 3-dimensional(3D) printed models derived from multidetector computed tomography (MDCT) and cone-beam computed tomography (CBCT) systems with different fields of view (FOVs). Materials and Methods: Five human dry mandibles were used to assess the accuracy of reconstructions of anatomical landmarks, bone defects, and intra-socket dimensions by 3D printers. The measurements were made on dry mandibles using a digital caliper (gold standard). The mandibles then underwent MDCT imaging. In addition, CBCT images were obtained using Cranex 3D and NewTom 3G scanners with 2 different FOVs. The images were transferred to two 3D printers, and the digital light processing (DLP) and fused deposition modeling (FDM) techniques were used to fabricate the 3D models, respectively. The same measurements were also made on the fabricated prototypes. The values measured on the 3D models were compared with the actual values, and the differences were analyzed using the paired t-test. Results: The landmarks measured on prototypes fabricated using the FDM and DLP techniques based on all 4 imaging systems showed differences from the gold standard. No significant differences were noted between the FDM and DLP techniques. Conclusion: The 3D printers were reliable systems for maxillofacial reconstruction. In this study, scanners with smaller voxels had the highest precision, and the DLP printer showed higher accuracy in reconstructing the maxillofacial landmarks. It seemed that 3D reconstructions of the anterior region were overestimated, while the reconstructions of intra-socket dimensions and implant holes were slightly underestimated.