• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.242-253
• /
• 2020

Purpose: The aim of this study was to compare the accuracy of dies fabricated using 3D printing system to conventional method and to evaluate overall volumetric changes by arranging the superimposed surfaces. Materials and Methods: A mandibular right first molar from a dental model was prepared, scanned and fabricated with composites of polyetherketoneketone (PEKK). Master dies were classified into 4 groups. For the conventional method, the impression was taken with polyvinylsiloxane and the impression was poured with Type IV dental stone. For the 3D printing, the standard die was scanned and converted into models using three different 3D printers. Each of four methods was used to make 10 specimens. Scanned files were superimposed with the standard die by using 3D surface matching software. For statistical analysis, Kruskal-Wallis test and Mann-Whitney U test were done (P < 0.05). Results: Compared to the standard model, the volumetric changes of dies fabricated by each method were significantly different except the models fabricated by conventional method and 3D printer of Stereolithography (P < 0.05). The conventional dies showed the lowest volumetric change than 3D printed dies (P < 0.05). 3D printed dies fabricated by Stereolithography showed the lowest volumetric change among the different 3D printers (P < 0.05). Conclusion: The conventional dies were more accurate than 3D printed dies, though 3D printed dies were within clinically acceptable range. Thus, 3D printed dies can be used for fabricating restorations.

• Journal of dental hygiene science
• /
• v.9 no.3
• /
• pp.295-302
• /
• 2009

The purpose of this study is to provide fundamental data for managing occupational stress and promoting health by investigating the factors of dental hygienists' occupational stress and the relationship among occupational stress, health status and somatization. The subjects in this study are 28 dental hygienists who have worked at dental clinic in the metropolitan area. The findings of this study are as follows: 1. The average age of the subjects is 25.1 and the average working career is 42.8 months. 8-9 hours is the most frequent average working time as 55.5% and a 6-day workweek appears most frequently with 33.8%. 2. The total average of occupational stress is 45.24 points and out of the seven sub-factors, job demand is the highest as 56.17 points. 3. A group of working at dental university hospitals scores significantly high and a group of working over 10 hours per day scores significantly low in health status (p<0.05). 4. A group of a 5-day workweek. night and holiday duty scores 18.64 which is significantly high in somatization(p<0.05). 5. Occupational stress have slightly negative correlation (-.341, p<0.01) with health status and slightly positive correlation (.330, p<0.01) with somatization. There is a strong, negative correlation between health status and somatization(-.762, p<0.01 ). 6. Health status and somatization have a slightly positive correlation with every other sub-factor of occupational stress except job self-control.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.197-205
• /
• 2011

Purpose: This study was to evaluate the accuracy of the implant torque controller used in dental clinics and to investigate whether it was applied appropriately. Materials and methods: Fifty dentists who work in dental clinics were enrolled in this study. Dental (implant) practice career, experience frequency of implant screw loosening and fracture, education of implant torque controller application and infection control methods were included in the survey. 25 Ncm and 30 Ncm of the tightening torque applied to the implant screw were measured by 50 clinicians. After measuring the torque value by using the torque controller, the torque mean according to where education about the implant torque controller was received was analyzed with independent t-test at the significance level of 0.05. Results: The torque controller used in private dental clinics showed 4.78% error ratio. When 50 dentists applied 25 Ncm to the implant screw was $29.0{\pm}8.4$ Ncm, and that in 30 Ncm was $34.3{\pm}9.1$ Ncm. Statistical significance was found between the group that was educated about implant torque application and the group that was not educated. Conclusion: During the prosthodontic treatment with implant, there was difference between actual applied torsion force and the amount torque controller indicated. Clinicians have to not only be well-informed about the accurate usage method of the torque controller, but also keep and manage the torque controller so as to maintain continuous and accurate torque values. Through this, it is considered to achieve clinical results to minimize problems of screw loosening or fracture.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.329-341
• /
• 1998

Sterilization has received much attention in orthodontic practices over the past several years. The present study was undertaken to investigate the effects of sterilization on the physical properties of orthodontic pliers-AEZ, Unitek, and Dentronix ligature cutters. This study was designed to examine the tips of ligature cutters before and after 200 and 400 sterilization cycles using the Bowmar RHT-1000, the Dentronix DDS-5000, and the Eschmann SES-2000. The tip surface and the fracture surface were observed with a scanning electron microscope. The microstructure was observed with an optical microscope. The hardness test was carried out with the mic개-Vickers hardness tester and the Rockwell C Scale hardness tester. The chemical composition was analyzed by energy dispersive X-ray spectrometer. The results of this study were as follows : 1. The number and the size of corrosion products on the tip surface and the proportion of cleavage planes in fractured specimen increased, but the hardness of the tip decreased in proportion to sterilization cycles. From these observations, it was considered that mechanical properities decreased in proportion to sterilization cycles. 2. The number and the size of chromium carbides increased in proportion to sterilization cycles. Coarse microstructure decreased mechanical properities. 3. The AEZ and Unitek ligature cutters were Fe-Cr stainless steels, but the Dentronix ligature cutter was Co-Cr alloy. There were many differences among manufactures, but the chemical composition was .not changed after sterilization cycles. 4. The tip edge of ligature cutter used in a clinic revealed microcracks with the SEM observation. Clinical experience confirmed that ligature cutters were gradually degraded by sterilization.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.117-127
• /
• 2002

The purpose of this study was to compare the arch width of the hyperdivergent group with that of the neutral group in Class III malocclusion based on the vertical patterns and to compare the arch width of Class III neutral group With that of normal occlusion group based on sagittal patterns. The subjects consisted of 118 pairs of studty casts, divided into three groups , 37 Class III hyperdivergent group(18 males and 19 females, SN-Mn plane angle>39.5$^{\circ}$), 40 Class III neutral group(20 males and 20 females, SN-Mn plane angle : 32 ${\pm}$ 2.5$^{\circ}$) and 41 Class I normal occlusion group(20 males and 21 females). The intercanine, interpremolar, and intermolar width of the maxillary and mandibular study casts were measured, then the ratios of dental width to basal width and mandibular width to maxillary width were obtained. Basal arch width and dental arch width were measured to obtain the pure basal arch relation in transverse plane as ruled out the transverse dental compensation. The results were as follows 1. There were no significant differences in any ratios between Class III hyperdivergent group and Class III neutral group as different vertical pattern. 2. As the ratios of dental arch width to basal arch width between normal occlusion group and Class III neutral group were compared, the maxillary teeth flared buccally to the basal bone, and the mandibular teeth tilted lingually to the basal bone in Class III neutral group. 3. The ratios of mandibular arch width to maxillary arch width in basal arch level were significantly different in all regions. Maxillary basal arch width of Class III neutral group was narrower than that of normal occlusion group. 4. The ratios of mandibular arch width to maxillary arch width in teeth level were not significantly different between normal occlusion group and Class III neutral group. In spite of discrepancies of maxillary and mandibular basal arch width, the dental arch width of Class III malocclusion group compensated very well. At the presurgical orthodontic treatment in clinic, it would not be desirable to decompensate for compensated dental arch width too much, for obtaining an appropriate arch compatibility and good results for orthognathic surgery.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.77-82
• /
• 2013

The purpose of this study was to examine the subjective awareness of smoker patients about the preparation of smoking cessation plans in an effort to lay the foundation for smoking cessation policy setting. The subjects were the selected patients at a dental clinic. A self-administered survey was conducted to grasp their personal characteristics, and the selected answer sheets from 236 respondents were analyzed. The findings of the study were as follows: 1. As for the extension of existing smoking cessation plans, the largest group (32.6%) preferred smoking cessation education, followed by smoking cessation counseling (28.8%), prescription of an smoking cessation aid (18.6%). 2. Concerning the necessity of a smoking cessation law, the men and the women respectively gave 2.37 and 3.00 to that, and the gender gap was significant. The patients had a significantly different opinion on the necessity of a rise in tobacco price according to their occupation and monthly mean household income, and their took a significantly different view of the necessity of smoking cessation counseling according to their residential area. 3. As a result of analyzing the correlation between their on effective smoking cessation policies and the related variables, all the variables had a statistically significant correlation to each other. 4. As a result of analyzing their opinions on what institution should be in charge of smoking cessation plans, the biggest group answered that dental clinics should be responsible for smoking cessation-aid prescription (50.0%), and the largest group replied that smoking cessation education and smoking cessation counseling should respectively be provided by public dental clinics (37.3%) and dental clinics (44.1%).The above-mentioned findings suggest that the preparation of new smoking cessation measures and the extension of existing smoking cessation plans are urgently required, and that dentists and dental hygienists should make a concerted effort to offer counseling and education to stimulate dental patients to abstain from smoking.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.203-218
• /
• 2003

The 3 year graduate school course of the dental technician, which has been enforced since 1994 till the present date, differs from the currently existing 2 year graduate course because of an 8 weeks clinical field training course being newly executed and an imposed curriculum about manufacturing specialized prosthetics like all-ceramic, double prosthetic technology, attachment, and implant. Even though nearly 10 years have passed, the education program of the 18 colleges have still not been standardized and the subjects differing a little, while some are still not following the 3 years graduate course. The goal of this research is to emphasize the qualities of the 3 years graduate program and enable the dental technician to handle clinical models in the dental technical clinic right after graduation by adding clinical field training in the dental technician education program of the 18 colleges. Also in accordance to a national and international increase in esthetical prosthetics, credits, weekly study hours, education practice time of specialized prosthetic dental technology can be analyzed as follows. 1. In the year 2003, currently colleges start clinical practice education starting from the 1st semester of the 2nd year junior year, to the 2nd semester of 3rd year the varying in time with adequate class time, and credits. The average credit is 9.56, and weekly average class time is 18.00 hours. later clinical trainee education will be adjusted to the 3 year graduate school course to 10 credits and 20 hours and the adequate education period should be the 2nd semester of 3rd grade when most basic clinical education has been covered. 2. Currently in the year 2003, all-ceramic education has an average credit of 8.01 in 17 colleges with an exception of Ma-san college. The weekly average theoretical education is 4.94 hours, weekly clinical education of 7.88 hours and currently in 14 colleges porcelain technical class usually starts in the 1st semester of the 2nd year. All-ceramic education is thought to have adequate credits, timing, and weekly study hours. 3. Currently in 2003 implant education is enforced in 11 colleges including Bu-san Catholic university and the education period is usually in the 3rd year. Out of the 11 colleges, only Bu-san Catholic univ., Ma-san and Shinheung college have practice training classes. We knew that Shingu, Dongu, Mokpo science colleges have practice training as a curriculum, namely specific prosthetics laboratory. Out of the 9 colleges enforcing implant education the average credits taken are 2.56, and the average hours of weekly theory education is 2.14, but with the exception of Shinheung college which has an implant practice training course theory and practice classes are not divided. Therefore implant education is thought to start in the 3rd year as a 3 credit course with 3 hours of theory and practice each. 4. Currently in 2003, theoretical attachment education is given in 15 colleges and including practical training it is given in 10 colleges. The education starts 1st semester of the 2nd year till the 2nd semester of the 3rd year. The average credit of attachment theory education in the 15 colleges was 3.64, the average weekly theoretical education was 2.64, and the average weekly practice training out of the schools teaching it was 3.20. Later attachment education is thought to start the 1st semester of the 3rd year as a 3 credit course with 2 hours of theory class and 3 hours of practice training. 5. Double prosthetic technology is currently carried out in Dae-jon Health Science college(2nd year 2nd semester, 2 credits, theory 2hours), Gimcheon college (1 credit, 2 hours of practical training), Bu-san Catholic university (4th year 2nd semester, 4 hours of theory. practice). When the 3 year course is enforced, education will start 1st semester of the 3rd year with 2hours of theory and practice each. 6. The newly installed programs of the 3 year education is clinical field training, and specialized prosthetic manufacturing practice like all-ceramic, double prosthetic technology, attachment, and implant. If such education is to be effectively managed, a primary precursor as systemic basic clinical education is thought to be important. 7. Nationally in the 18 colleges of dental technology the currently executed curriculum course had varying subjects, class time according to the subject, and credits by each college. The curriculum difference between the colleges must be settled.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.1
• /
• pp.11-19
• /
• 2013

Purpose: The aim of this study was to evaluate the heat generation in bone in vitro during the guided flapless drilling procedure and the effect of drilling methods on the heat generation. Materials and methods: A model that has missing the first and second mandibular molars bilaterally was used. In group A, classical flap implant surgery was performed. In group B, flapless implant surgery using surgical guide was performed. In group C, flapless implant surgery using surgical guide without up-and-down pumping motion was performed. Temperature was measured with k-type thermocouple and a real-time digital thermometer. The thermocouples were placed at 0.5 mm away from the osteotomy area at the depths of 3 mm and 6 mm. The measured values were evaluated with independent t-test. Results: The mean temperature generated was $27.2^{\circ}C$ ($SD{\pm}2.1^{\circ}C$) and $27.5^{\circ}C$ ($SD{\pm}2.3^{\circ}C$) for groups A and B, respectively. These differences were not statistically significant. In group C, the mean temperature was $37.0^{\circ}C$ ($SD{\pm}3.4^{\circ}C$). There were statistically significant differences between groups B and C with respect to the mean temperature. Conclusion: These findings suggest that guided flapless drilling with up-and-down pumping motion may not significantly increase the bone temperature.

• Journal of Oral Medicine and Pain
• /
• v.34 no.1
• /
• pp.63-79
• /
• 2009

While previous epidemiological studies on temporomandibular disorders (TMD) have been based on a given health center or population sample, no study has been performed on general population of Korea, especially concerning about treatment pattern such as clinician’s specialty involved in TMD treatment, types and amount of prescription medication and cost. This study aimed to investigate magnitude of health visits and treatment patterns for Korean patients with TMD through the computerized database of Health Insurance Review and Assessment Service (HIRAS). Inclusion criteria were all patients registered on the HIRAS database over 3 years' period from 2003 to 2005 and the medical records of patients with TMD as a main diagnosis were extracted. Information collected was as follows; distribution related to gender, age and region and type of hospital the patients visited, treatment duration, clinicians' specialty involved in treatment, cost, types of prescription medication and surgical treatment. The results of this study indicated that 0.15% of the population yearly sought TMD treatment, presenting with increase of incidence over the three years. Most of TMD patients were women (99.8%) and the biggest age group was second and third decades and decreased with age. Seoul and Kyeonggi province presented with higher incidence of TMD compared to the other regions of Korea, which seems to be related with magnitude of population. 56% of TMD patients visited primary care sector and the numbers of treatment visits was the highest in dental clinic (38.4%), followed by orthopedics (28%) and ENT (13.6%) clinics in order. Duration of prescription medication was the longest for anti-inflammatory analgesics, followed by antipsychotic drugs and muscle relaxants. Inpatient care related to TMD was primarily performed in dental hospital compared to medical hospital. Medical database of HIRAS provided comprehensive and vast information on epidemiologic characteristics and treatment patterns for patients seeking TMD treatment, which can be more reliable data to expect medical demand for TMD in condition that accurate diagnosis and standardized treatment is delivered in clinical settings.

• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.397-407
• /
• 2009

The aim of the study was to evaluate psychosocial impact of non-dental chronic orofacial pain (OFP) on daily living using the graded chronic pain (GCP) scale. It is also investigated the clinical profile such as demographics, event related to initiation of OFP and prior treatments for patients. During previous 6 months since September 2008, 572 patients (M:F=1:1.5, mean age=34.7 years) with non-dental OFP attended university-based specialist orofacial pain clinic (Dankook University Dental Hospital, Cheonan) to seek care although 63% of them already experienced related treatment for their OFP problem. They visited the most frequently general dental practitioner and orthopedic doctors due to their pain problem and medication was the most commonly employed modality. Most of the patients (89.2%) had TMD and the most common related event to initiation of their pain was trauma, followed by dental treatment. Almost half of the patients (46%) suffered from chronic pain(${\geq}6\;M$) and 40% of them exhibited relatively high disability due to chronic OFP. GCP pain intensity and disability days were significantly different for age and diagnosis (p<0.05) but not for gender and duration. GCP grades were affected by all the factors including gender, age, pain duration and diagnosis.(p=0.000) Female gender, elders, and long lasting pain were closely related to high disability. The patients with neuropathic Pain and mixed OFP rather than TMD were graded as being highly disabled. Conclusively, a considerable percentage of chronic OFP patients reports high pain-related disability in their daily, social and work activity, which suggest a need for psychosocial support and importance of earlier referral for appropriate diagnosis and tailored management.