• 한국해양공학회지
• /
• 제24권4호
• /
• pp.1-7
• /
• 2010

Over the past few decades various experimental and theoretical investigations have been performed on offshore tubular members with regard to damage resistance and residual strength. Analysis of damaged tubular members requires a three-dimensional shell analysis for accurate results. Even though various commercial packages are available for this purpose, a beam-column analysis is preferred for offshore structural designs. In this paper, empirical equations are provided for a more accurate beam-column analysis of damaged tubes including the relationships between the lateral denting load and the depth of the dent, the rate of dent deepening due to increasing curvature and the longitudinal variation in the dent depth of damaged tubes. A design equation to predict the ultimate bending capacities of damaged offshore tubular members is also presented.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.182-190
• /
• 2020

This study reports a series of drop impact tests performed to generate denting damages on stiffened plates and their residual ultimate strength tests under axial compression. The models were fabricated of general structural steel, and each model has six longitudinal stiffeners and two transverse frames. Among six fabricated models, four were damaged, and two were left intact for reference. To investigate the effects of collision velocity and impact location on the extent of damage, the drop height and the impact location were changed in each impact test. After performing the collision tests, the ultimate axial compression tests were conducted to investigate the residual strengths of the damaged stiffened plates. Finite element analyses were also carried out using a commercial package Abaqus/Explicit. The material properties obtained from a quasi-static tensile tests were used, and the strain-rate sensitivity was considered. After importing the collision simulation results, the ultimate strength calculations were carried out and their results were compared with the test data for the validation of the finite element analysis method.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.577-577
• /
• 1989

In this paper, a detail evaluation of ultimate strength of offshore unstiffened tubular members with bending and local denting damage which are subjected to combined axial force and bending moment and to component load is presented through theoretical and experimental approaches. Based upon the results obtained here, the damage effect on the ultimate strength of tubular member under combined loads and component load is investigated.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.77-86
• /
• 1989

In this paper, a detail evaluation of ultimate strength of offshore unstiffened tubular members with bending and local denting damage which are subjected to combined axial force and bending moment and to component load is presented through theoretical and experimental approaches. Based upon the results obtained here, the damage effect on the ultimate strength of tubular member under combined loads and component load is investigated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.322-325
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the thirty six cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the best improvement of dent resistance.

• 소성∙가공
• /
• 제16권4호
• /
• pp.254-259
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the eighteen cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the optimal improvement of dent resistance.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.22-35
• /
• 1995

A simplified numerical procedure have proposed to trace the dynamic behaviour of offshore tubulars subjected to lateral collision impacts. The local denting and overall bending deformation of the struck tubular are represented by a non-linear spring and an elastic visco-plastic beam respectively. In this method a temporal finite difference method and a spacial finite element method are employed. Using this method various boundary conditions are able to considered and their effects on the extent of damage can be quantified. The extent of damage due to collision can be obtained as results of the dynamic analysis. The predictions using the proposed method have been correlated with existing test results and then the reliability of the procedure has been substantiated. The characteristics of the dynamic response of tubulars under lateral impacts are compared for simply supported roller and fixed end conditions and their effects on the extent of damage are specfied.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.77-82
• /
• 2004

노후선박의 구조적 안전성을 확보하기 위해서는 부식이나 피로균열 및 기계적인 손상에 의하여 선체 구조 강도가 어떠한 영향을 받는지 충분히 검토하여 적절한 수리 보수 등 이에 대한 대책을 강구할 필요가 있다. 본 연구에서는 이러한 관점에서 부식, 피로균열, 기계적인 손상과 같은 노후 선박에 발생할 수 있는 여러 가지 손상이 선체강도에 미치는 영향을 이론적, 수치적, 실험적인 방법을 통하여 조사하고, 이를 통하여 선각거더의 소성붕괴강도 저하를 고려한 신뢰성 평가법 및 보수, 수리를 통한 인정수준 이상의 선각강도를 유지하게 하는 지침도 연구하였다.

• 대한조선학회지
• /
• 제26권4호
• /
• pp.81-93
• /
• 1989

본(本) 논문(論文)에서는 충돌(衝突)이나 중량물(重量物) 낙하(落下)등에 의한 사고하중(事故荷重)을 받는 해양구조물(海洋構造物)의 원통부재(圓筒部材)에 대한 손상변형거동(損傷變形擧動)을 실용적(實用的)으로 추정(推定)할 수 있는 새로운 손상예측(損傷豫測) 모델을 제안(提案)한다. 본(本) 논문(論文)은 하중속도(荷重速度)가 비교적(比較的) 느리고 준정적(準靜的) 문제(問題)로서 다룰수 있는 경우만을 대상(對象)으로 하고 있다. 본연구(本硏究)에서 취급하는 원통부재(圓筒部材)는 양단단순(兩端單純) 지지(支持)되어 있고 축방향(軸方向)의 변위(變位)는 구속(拘束)되어 있으며, 하중(荷重)은 부재(部材)의 중앙위치(中央位置)에서 횡방향(橫方向)으로 작용(作用)한다고 가정(假定)한다. 지금까지의 연구성과(硏究成果) 및 본(本) 연구(硏究)에서 직접(直接) 수행(遂行)한 실험결과(實驗結果)를 바탕으로 사고하중작용시(事故荷重作用時)의 원통부재(圓筒部材)에 대한 손상변형거동(損傷變形擧動)을 상세(詳細)히 파악(把握)하고, 국부(局部) Dent 손상(損傷) 및 전체적(全體的)인 굽힘 처짐의 상관효과(相關效果)를 고려(考慮)한 하중-손상변형(荷重-損傷變形) 관계식(關係式)을 도출(導出)하였으며, 실제적(實際的)인 원통부재(圓筒部材)에 대한 실험결과(實驗結果)와 본연구(本硏究)에서 제안(提案)한 예측(豫測) 모델에 의한 추정결과(推定結果)는 잘 대응(對應)하고 있다는 것을 확인(確認)하였다. 특(特)히, 이 같은 하중상태하(荷重狀態下)에서의 실제부재(實際部材)의 손상변형거동(損傷變形擧動)에 대하여는 국부(局部) Dent 손상(損傷)과 전체적(全體的)인 굽힘처짐의 상관효과(相關效果)가 매우 크다는 것을 알았으며, 본예측(本豫測) 모델은 이들의 효과(效果)도 잘 나타내고 있다.

• 대한조선학회지
• /
• 제27권4호
• /
• pp.72-82
• /
• 1990

해양구조물의 비보강원통 부재가 충돌로 인해 횡 충격하중을 받는 경우 비보강원통의 동적거동을 추적하고 그 결과로 발생되는 손상의 정도를 예측할 수 있는 간이 수치해석 방법을 제안하고자 한다. 이 방법에서는 국부적인 변형과 전체굽힘 변형을 별도로 자유도로 분리하여 2 자유도의 스프링-질량계로 치환하여 해석하게 된다. 변형속도를 비롯한 기타의 동적효과가 굽힘변형을 나타내는 스프링 상수값에 미치는 영향은 실험자료로부터 얻어진 수정계수를 도입하여 고려하였다. 제안된 해석방법을 사용하여 얻어진 손상정도의 값들은 실험결과와 비교적 잘 일치하고 있다.