• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.355-364
• /
• 1992

This is a study on the effect of the dentinal pretreatment method to the bond strength between dentin and glass ionomer cement. In this study, 196 human molar teeth with sound crown were used. The dentin surfaces of these teeth were exposed with wet trimmer and polished with # 800 Emory paper and teeth were divided into 7 groups according to the pretreatment agent and method. Each group has 4 subroups of the kinds of glass ionomers. The shear bond strength were measured by Instron Universal Testing machine model 1122. The data of the evaluations were then subjected to statistical analysis using one way ANOVA and the result were as follows : 1. In Durelon liquid 20 sec scrubbing & Vitrebond filling subgroup, shear bond strength was highest with measurements of 72.41(kg/$cm^2$) and in no pretreatment & Shofu lining cement filling subgroup, lowest with measurements of 4.77(kg/$cm^2$). 2. In no pretreatment group, statistical significant differences were found between the subgroups of G-C lining cement and Shofu lining cement. 3. In Ketac conditioner 20 sec scrubbing group, Vitrebond were bonded stronger than others, and in Ketac conditioner 10 sec passive contact group, it has the significant difference with other glass ionomers except G-C lining cement. 4. The subgroup og G-C dentin conditioner 20 sec scrubbing & G-C lining cement filling was bonded to dentin stronger than the subgroup of no pretreatment & Shofu lining cement. In G-C dentin conditioner groups, both of 10 sec passive contact and 20 sec scrubbing, Vitrebond has highest bond strength among the subgroups. 5. The subgroup of Durelon liquid 10 sec passive contact & G-C lining cement filling was bonded to dentin stronger than the subgroup of no pretreatment & Shofu lining cement. Also in both Durelon liquid groups, Vitrebond were bonded to dentin with the highest strength among the subgroups.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.76-92
• /
• 1998

The purpose of this study was to evaluate the possible efficacy of Nd-YAG laser as a dentin conditioner by observing the laser irradiation dentin surface under scanning electron micrograph and measuring shear bond strength of restored light-cured glass ionomer mold. Fifty intact premolars were prepared for shear bond strength tests. The teeth were randomly divided into five groups as follows; Group I. no treatment Group II. 10% poly acrylic acid, 20 sec Group III. laser treatment 2 w, 20 Hz, 2 sec Group IV. laser treatment 2 w, 20 Hz, 5 sec Group V. laser treatment 2 w, 20 Hz, 10 sec Samples of each group were restored with light-cured glass ionomer cement after dentin conditioning and then measuring the shear bond strength of each specimen were measured using universal testing machine. Additional ten premolars were prepared for SEM analysis The result from the this study can be summarized as follows. 1. Shear bond strength of polyacrylic acid-treated group (II) was significantly higher than other groups (p<0.05). 2. No statistically significant difference could be found between three laser-treated groups (III, IV, V) in shear bond strength(p>0.05) 3. According to the result of observation under SEM, Polyacrylic acid was shown to have removed the smear layer effectively and opened the dentinal tubules, whereas the laser has produced the irregular surface mainly composed of melted and fused structure. The microcracks found in laser-treated groups increased in number with irradiation time and formed the regular mesh-type in 10 sec-irradiation group. 4. The ultrastructural change of dentin surface created by laser irradiation was found to the improper for bonding of the glass ionomer restorative materials. And the lower shear bond strength of laser irradiated group might have been due to the failure to form the suit able dentin surface for the glass ionomer to penetrated into and form the proper micromechanical retention.

• Restorative Dentistry and Endodontics
• /
• 제47권3호
• /
• pp.28.1-28.12
• /
• 2022

Objectives: Metalloproteinase-inhibiting agents, such as chitosan, can prevent collagen degradation in demineralized dental substrates, thereby improving the adhesive interface. This study evaluated the bond strength (BS) and chemical and morphological characterization of the adhesive interface after applying chitosan solution to demineralized dentin. Materials and Methods: The 80 third molars were selected. Forty teeth underwent caries induction using the pH cycling method. The teeth were divided according to the treatment: distilled water (control) and 2.5% chitosan solution. The surfaces were restored using adhesive and composite resins. Half of the specimens in each group were aged, and the other half underwent immediate analyses. The teeth were sectioned and underwent the microtensile bond strength test (µTBS), and chemical and morphological analyses using energy-dispersive spectroscopy and scanning electron microscopy, respectively. Data analysis was performed using 3-way analysis of variance. Results: For µTBS, sound dentin was superior to demineralized dentin (p < 0.001), chitosan-treated specimens had higher bond strength than the untreated ones (p < 0.001), and those that underwent immediate analysis had higher values than the aged specimens (p = 0.019). No significant differences were observed in the chemical or morphological compositions. Conclusions: Chitosan treatment improved bond strength both immediately and after aging, even in demineralized dentin.

• 구강회복응용과학지
• /
• 제28권1호
• /
• pp.67-78
• /
• 2012

본 연구에서는 Clearfil$^{TM}$ SEBond와 Adapter$^{TM}$ SingleBond2를 사용하여 즉시 상아질 접착을 하였을 때 지연 상아질 접착을 하였을 때와 비교해 전단결합강도 및 파절 양상을 관찰하였다. 발치된 구치를 네 군으로 나누어 1군은 대조군으로 치아 삭제 직후 시편을 상아질 접착제를 광중합 후 합착하였고 2군과 3군은 치아 삭제 직후 각각 Clearfil$^{TM}$ SEBond와 Adapter$^{TM}$ SingleBond2로 즉시 상아질 접착을 한 후 열 순환기에 교대침수 시키고 상아질 접착제를 광중합하지 않고 합착하였다. 4군은 삭제 후 아무 처리를 하지 않고 열 순환 후 상아질 접착제를 광중합하지 않고 합착하였다. 이후 만능 시험기로 모든 시편의 전단결합강도를 측정하였으며, 광학현미경으로 파절 양상을 관찰하였다. 측정 결과 대조군이 가장 높은 결합력을 보였고 지연 상아질 접착을 시행한 군에서 가장 낮은 결합력을 보였다. Clearfil$^{TM}$ SEBond로 즉시 상아질 접착을 한 군은 대조군과 유의한 차이를 보이지 않았고, 4군보다 유의하게 높은 결합력을 보였다. Adapter$^{TM}$ SingleBond2를 이용하여 즉시 상아질 접착을 한 군은 4군보다 높은 결합력을 보였으나 유의한 차이를 보이지 않았다. 파절 양상에서는 대조군과 2군이 4군에 비해 유의하게 혼합형 파절이 많이 나타났다(p<0.05). 이상의 결과로 보아, 도재 수복물의 합착에 있어서 치아 삭제 후 즉시 상아질 접착제를 적용하는 것이 바람직하다고 사료된다. 하지만 이때 사용되는 상아질 접착제의 선택에 있어서는 실제 임상 조건에서의 더 많은 연구가 필요하리라 사료된다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.576-577
• /
• 2003

I. Objectives This study investigated the dentin shear bond strength and the degree of conversion (DC) of currently used dentin bonding agents (DBAs) that were irradiated with a light emitting diode (LED) light curing unit (LCU) and a halogen LCU. II. Materials and methods The halogen LCU and the LED LCU used in this study were a VIP(Bisco, Schaumburg, IL, USA) and an Elipar Freelight(3M ESPE, St Paul, MN, USA) respectively. For the VIP, $400mW{\cdot}cm-2$ intensity mode was used to adjust to the intensity of the LED LCU. The DBAs used in this study were Scotchbond Multipurpose (3M ESPE), Single Bond (3M ESPE), One-step(Bisco), Clearfil SE Bond(Kuraray), and Adper Prompt(3M ESPE).(omitted)

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.609-621
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of three light-cured glass ionomer cements to blood contaminated bovine dentin. The materials used in this study were Fuji II LC, Dyract and Variglass VLC. The dentin conditioners were 10% polyacrylic acid, 10% maleic acid and 10% phosphoric acid. 180 lower anterior bovine teeth were selected in this study. The teeth were embedded in acrylic resin and were grounded with 320 to 600 grit silicon carbide paper to create a flat dentin surface. The teeth were divided into SIX groups. The experimental procedures in six groups were as follows; Group l(GF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment. Group 2(BGF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment and blood contamination. Group 3(MD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment. Group 4(BMD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment and blood contamination. Group 5(PV) : Samples bonded to dentin surface with Variglass VLC after 10% phosphoric acid treatment. Group 6(BPV) : Samples bonded-to dentin surface with Variglass VLC after 10% phosphoric acid treatment and blood contamination. Group 1,3 and 5 were classified into the control groups, while group 2,4 and 6 were classified into the experimental groups. Each group contained 30 samples. After 24 hours water storage at $37^{\circ}C$, all smples were subjected to a shear load to fracture at a cross head speed of 1.0 mm/min with Instron universal testing machine(No. 4467). Debonded surfaces were observed under Scanning Electron Microscope(Hitachi S-2300) at 20kvp. The data were evaluated statistically at the 95% confidence level with Student's t-test. The following results obtained; 1. Shear bond strengths were higher in the control groups(1,3,5 group) than in the experimental groups(2,4,6 group). 2. The shear bond strength of group 5(PV) was the highest in the control groups, and the group 5 was significantly higher than the group l(GF) on the shear bond strength. 3. The group 4(BMD) was the highest on the shear bond strength, and the group 2(BGF) was the lowest in the experimental groups. The group 4(BMD) and 6(BPV) showed a significant difference with the group 2 on the shear bond strength. 4. All the groups showed an adhesive-cohesive failure. except the group 2(BGF) showing adhesive failure.

• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.319-324
• /
• 2003

Statement of problem. Adhesives in dentistry playa major role in the success of restorative treatments. In the treatment of all ceramic restoration it is needed to find the adequate bond strength between enamel and dentin. Purpose. The purpose of this study was to evaluate shear bond strength of resin cement bonded to extracted human uncut enamel, cut enamel, and dentin in vitro. Material and methods. Ten freshly extracted anterior teeth without any previous restorative treatments were chosen. The extracted teeth were embedded in PMMA cold acrylic in the shape of a cylinder, 25 mm in diameter by 25 mm in height. The bonding system used was as follow: Uni-Etch (32% phosphoric acid), One-Step adhesive, Duolink resin cement. The specimens were acid etched and rinsed with water. Two layers of One-Step adhesive were coated with a disposable brush on the uncut enamel. VIP curing light at $500mV/cm^2$ was used to cure the adhesive. For cut enamel shear bond test, the specimen used for uncut enamel was further reduced approximately $0.3{\sim}0.5mm$ using a laminate preparation diamond bur (0.3 mm in depth). The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit SiC paper and cleaned with distilled water. The bonding procedure on the cut enamel was same as uncut enamel bonding procedure. For dentin bonding test, the specimen used for cut enamel was further reduced approximately $0.5mm{\sim}1.0mm$ using a laminate preparation diamond bur (0.5 mm in depth of diamond cutting). The amount of reduction was evaluated with the silicone mold. The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit silicon carbon paper and cleaned in distilled water. The bonding procedure on the dentin was same as uncut enamel bonding procedure. All samples were mounted and secured on the Ultradent shear bond test sample holder, and Ultradent restricted shear bond testing device was used with Universal Instron machine until fracture. Analysis of variance (ANOVA) test was performed comparing the result at P<0.05. Multiple comparison (Tukey) was used to compare each groups. Result. The result showed that the mean value in shear bond strength of resin cement bonded to uncut enamel, cut enamel and dentin were 27.04 Mpa, 30.25 Mpa and 26.39 Mpa with respect. Conclusion. Within the limitation of this study, the mean value of the shear bond strength of cut enamel was higher than those of uncut enamel or dentin. However there existed no statistical differences between three different human dentition substrates due to increased adhesive characteristics.

• Restorative Dentistry and Endodontics
• /
• 제32권3호
• /
• pp.198-207
• /
• 2007

본 연구는 다양한 접착 과정과 기전을 지닌 4종의 상아질 접착제를 이용하여 수산화칼슘의 사용 여부 및 그 적용 기간이 접착강도에 미치는 영향을 측정 및 평가하고 주사전자현미경을 이용한 접착 계면의 관찰을 통해 복합레진 수복이나 레진 시멘트를 이용한 수복물 접착 시에 적절한 상아질 접착제의 선택과 사용방법을 알아보고자 시행하였다. 치수강에 근접한 상아질 표면을 노출시킨 후, $Ca(OH)_2$를 생리식염수와 혼합하여 실험군 치아 24개의 상아질 표면에 적용한 후, IRM (Intermediate Restorative Material, Dentsply Caulk, Milford, USA)으로 적용된 수산화칼슘 및 변연 부위의 상아질과 법랑질 모두를 밀폐하여 $36.5^{\circ}C$ 증류수에서 실험기간 (7일 및 30일) 동안 보관하였다. Scotchbond Multipurpose, Single Bond, SE Bond and Prompt L-Pop 등 4종의 상아질 접착제를 제조사의 지시에 따라 적용하고 복합 레진을 3회에 나누어 총 5 mm 높이로 적층한 뒤 각 층마다 20초씩 광조사를 시행하였다. Universal testing machine을 이용하여 1mm/min의 crosshead speed로 하중을 가하여 미세인장 접착 강도를 측정하고 파단면을 주사전자현미경으로 관찰하였다. 이상의 연구 결과에서 단기간 (7일 또는 30일간)의 수산화칼슘 적용은 상아질 접착제의 접착 과정의 차이에 따른 변화를 나타내지 않는 것으로 평가되었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.566-566
• /
• 2003

The purpose of this in vitro study was to measure and compare the in vitro micro shear bond strengths of the following dentin bonding systems to different dentin surfaces under simulated pulpal pressure. Occlusal surfaces of 180 extracted human molars were prepared to expose the dentin surface in perpendicular to axis of tooth. Teeth were randomly assigned to 3 equal groups and subdivided into 4 equal groups. 4 adhesive systems(All Bond 2, SEbond, AdheSE, Prompt L-Pop) were used in this study.(omitted)

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.317-322
• /
• 2015

PURPOSE. The aim was to evaluate the effect of curing mode and different dentin surface pretreatment on microtensile bond strength (${\mu}TBS$) of self-adhesive resin cements. MATERIALS AND METHODS. Thirty-six extracted human permanent molars were sectioned horizontally exposing flat dentin surface. The teeth were divided into 12 groups (3 teeth/group) according to the dentin surface pretreatment methods (control, 18% EDTA, 10% Polyacrylic acid) and curing mode (self-curing vs. light-curing) of cement. After pretreatment, composite resin blocks were cemented with the following: (a) G-CEM LinkAce; (b) RelyX U200, followed by either self-curing or light-curing. After storage, the teeth were sectioned and ${\mu}TBS$ test was performed using a microtensile testing machine. The data was statistically analyzed using one-way ANOVA, Student T-test and Scheffe's post-hoc test at P<.05 level. RESULTS. For G-CEM LinkAce cement groups, polyacrylic acid pretreatment showed the highest ${\mu}TBS$ in the self-cured group. In the light-cured group, no significant improvements were observed according to the dentin surface pretreatment. There were no significant differences between curing modes. Both dentin surface pretreatment methods helped to increase the ${\mu}TBS$ of RelyX U200 resin cement significantly and degree of pretreatment effect was similar. No significant differences were found regarding curing modes except control groups. In the comparisons of two self-adhesive resin cements, all groups within the same pretreatment and curing mode were significantly different excluding self-cured control groups. CONCLUSION. Selecting RelyX U200 used in this study and application of dentin surface pretreatment with EDTA and polyacrylic acid might be recommended to enhance the bond strength of cement to dentin.