• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.181-194
• /
• 1994

The purpose of this study was to compare the retention and fitness of crown treated with various desensitizing agents on natural teeth. Varnish, dentin primer, bonding agent and potassium oxalate treated groups and control group with no treatment were used. The retention test was executed with the Instron test machine(Instron Co.,U.S.A.) on 24 hours after cementation with zinc phosphate cement. After retention test, the teeth and crowns were washed and recemented. The cemented crowns were embedded in clear resin and sectioned with a diamond saw. The occlusal and marginal fitnesses, were measured indirectly with a stereomicroscopic photographs. The result of this study were obtained as follows : 1. The retention of control group was higher than any other desensitizing agent treated group. 2. The differences of retention among varnish, dentin primer, bonding agent and potassium oxalate treated groups were not statistically significant. 3. There were no statistically significant difference in fitness at occlusal surface and margin among control, varnish, dentin primer, bonding agent and potassium oxalate treated groups. According to these results, desensitizing agents used to protect the pulp from irritation of luting agents may adversely affect the retention of castings. Therefore, desensitizing agents should be used in limited areas carefully.

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.147-155
• /
• 2008

5세대 상아질 접착제인 Adper Single bond 2.0 (3M-ESPE, USA), 6세대 상아질 접착제인 Prompt L-pop (3M-ESPE, USA), AdheSE (Ivoclar Vivadent, Liechtenstein) 를 각 상아질 접착제당 30개의 건전한 소구치 및 대구치를 선정하여 협면과 설면에 5급와동을 형성하고 복합레진을 적용하였다. 이중 절반은 열순환을 시행하지 않고 나머지 절반은 열순환을 시행하였다. 이후 메틸렌 블루를 침투시켜 시약의 침투 정도를 측정한 후 통계분석하였다. 열순환을 시행하지 않은 군과 열순환을 시행한 군을 통틀어 열순환을 시행하지 않은 상아질 군에서만 Single Bond 2.0의 미세누출의 양이 Prompt L-Pop과 AdheSE에 비하여 높았고 (p <.05) 나머지 군에서는 모두 Single Bond 2.0의 미세누출의 양이 적었다. (p <.05) 열순환 이후에 미세누출의 양이 늘어난 군은 Prompt L-Pop과 AdheSE의 상아질 군이었다.

• 대한소아치과학회지
• /
• 제23권2호
• /
• pp.450-460
• /
• 1996

The purpose of this study was to compare shear bond strength of composite resin using several dentin bonding agents and light cured glass ionomer cement(Fuji II LC). 40 Bovine primary anterior teeth were used for this experiment. Labial surface of teeth were flattened. It were divided into four groups. Each group was composed of 10 teeth. The material used for this experiment were Scotchbond Multipurpose-Z-100, Allbond 2-Aelitefil, Gluma-Pekalux, light cured glass ionomer cement(Fuji II LC). Each of the materials was applied to the exposed surfaces of 10 teeth by insertion into a cylindrical shaped matrix which is 3mm diameter and 3mm in height. The completed specimens were stored at $37^{\circ}C$ under 100% humidity for 24 hours : the shear bond strength of each material to dentin surface were measured with INSTRON universal testing machine. The results were as follows : 1. Shear bond strength to dentin surface increased in order of light cured glass ionomer cement(Fuji II LC), Gluma, Allbond 2, Scotchbond Multipurpose. 2. Between shear bond strength of light cured glass ionomer cement(Fuji II LC) and Allbond 2, there was statistical significace(p<0.05) 3. Between shear bond strength of light cured glass ionomer cement(Fuji II LC) and Scotchbond Multipurpose, between shear bond strength of Gluma and Scotchbond Multipurpose, there was statistical significance.(p<0.01) The shear bond strength of dentin bonding agents were higher than light cured glass ionomer cement. The reason is that materials and quality of dentin bonding agent were enhanced. Further investigation is necessary to improve shear bond strength of light cured glass ionomer cement.

• Journal of Periodontal and Implant Science
• /
• 제21권2호
• /
• pp.190.2-190.2
• /
• 1991

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.576-577
• /
• 2003

I. Objectives This study investigated the dentin shear bond strength and the degree of conversion (DC) of currently used dentin bonding agents (DBAs) that were irradiated with a light emitting diode (LED) light curing unit (LCU) and a halogen LCU. II. Materials and methods The halogen LCU and the LED LCU used in this study were a VIP(Bisco, Schaumburg, IL, USA) and an Elipar Freelight(3M ESPE, St Paul, MN, USA) respectively. For the VIP, $400mW{\cdot}cm-2$ intensity mode was used to adjust to the intensity of the LED LCU. The DBAs used in this study were Scotchbond Multipurpose (3M ESPE), Single Bond (3M ESPE), One-step(Bisco), Clearfil SE Bond(Kuraray), and Adper Prompt(3M ESPE).(omitted)

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.447-463
• /
• 1997

The purpose of this study was to evaluate the effectiveness of copal varnish and five bonding agents(Scotchbond Multi-Purpose Plus Dental Adhesive System, Panavia 21, All Bond 2, Superbond D-Liner II plus, Fuji Duet) in reducing microleakage under amalgam restorations. Class V cavity were prepared on both buccal and lingual surface of sixty extracted human molars with cementum margin and were filled with different kinds of liners and amalgam. All teeth were stored at $37^{\circ}C$ in physiologic saline solution. After 1 week they were thermally stressed for 500 cycles between 5 and $55^{\circ}C$ in baths containing 0.5 % basic fuchsin dye. The dye penetrations were observed with a stereomicroscope. Scanning electron micrographs were taken of representative tooth sections from each group to assess the nature of the tooth/liner/amalgam interface. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The results were as follows ; 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. At the dentin and enamel margins, the leakage value of Copalite-lined group showed significantly higher than that of no liner group (p<0.05), but showed significantly lower than that of bonding agent lined-groups (p<0.05). 3. There was no significant difference between the bonding agent lined-groups (p>0.05). 4. On the backscattered scanning electron microscopy observation, discontinuous gaps were observed between amalgam and dentin in the bonding agent-lined amalgam restorations and the bonding agents appeared to fill the gap space and were mixed with amalgam particles. At the amalgam/tooth interface, unsealed dentin and continuous gaps were found in both unlined and Copalite-lined restorations.

• 대한치과보철학회지
• /
• 제52권3호
• /
• pp.165-176
• /
• 2014

목적: 상아질 지각과민증의 치료를 위해 사용되는 지각과민 처치제의 효과는 일시적인 것으로 보이며 이는 상당부분 칫솔질에 의한 마모소실로 판단된다. 지각과민 처치제의 칫솔질에 의한 마모를 감소시키기 위해 bonding resin을 지각과민 처치제에 추가 도포하여 칫솔질 시행 후 상아질 투과도의 변화에 대해 연구하였다. 재료 및 방법: 우식이 없는 치아를 이용하여 1 mm 두께의 치관부 상아질 디스크를 제작한 다음, All-Bond 2$^{(R)}$, Seal & Protect$^{(R)}$, Gluma$^{(R)}$, MS Coat$^{(R)}$의 4 종류의 지각과민 처치제만 처리한 시편과 Dentine/Enamel Bonding Resin$^{(R)}$ (Bisco Inc.)을 추가로 도포한 시편에 대해 처리하기 전과 처리한 후, 1주(왕복 140회), 2주(왕복 280회), 6주(왕복 840회)에 해당하는 칫솔질을 적용한 후에 측정한 hydraulic conductance (Lp)와 주사 전자 현미경 사진을 비교 분석하였다. 결과: 지각과민 처치제 만을 처리한 군과 bonding resin (Dentine/Enamel Bonding Resin$^{(R)}$)을 추가 도포한 군 모두에서 처리 직후 hydraulic conductance가 급격히 감소하였다. 지각과민 처치제만 처리한 군과 bonding resin을 추가 도포한 군 간의 hydraulic conductance를 비교한 결과 All-Bond 2$^{(R)}$, Gluma$^{(R)}$, MS Coat$^{(R)}$와 bonding resin을 도포한 군에서는 1주(왕복 140회), 2주(왕복 280회), 6주(왕복 840회)의 칫솔질을 시행한 후 hydraulic conductance가 지각과민 처치제만 도포한 군에 비해 현저히 낮았고, Seal & Protect$^{(R)}$ 에서는 6주(왕복840회)의 칫솔질을 시행한 후에만 같은 결과를 보였다. 주사 전자 현미경 관찰에서 지각과민 처치제만 처리한 군과 bonding resin을 추가로 도포한 군 모두에서 처리 직후에 상아세관이 완전히 폐쇄되거나 일부만 폐쇄되어 상아 세관의 내경이 감소된 양상을 볼 수 있었으나, 6주(왕복 840회) 칫솔질 시행 후에는 bonding resin을 추가 도포한 군에서만 현저하게 폐쇄 또는 내경이 감소된 상아세관이 관찰되었다. 결론: 지각과민 처치제 처리 후 bonding resin (Dentine/Enamel Bonding Resin$^{(R)}$, Bisco Inc.)을 추가 도포하는 것이 지속적인 상아세관 폐쇄에 효과적임을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.99-117
• /
• 1991

The purpose of this study is to evaluate the effects of dentin bonding agents on the fibroblasts cultivated from human pulp tissue. The fibroblasts were cultured in DMEM/10%FBS medium. Whatman filter paper discs (6mm diameter) soaked with $2{\mu}l$ of dentin bonding agents were placed on a millipore filter (pore size $0.22{\mu}m$) contained in a 50mm Petri dish, and then, exposed for 10 minutes, 30 minutes, 1 hour, 6 hours, 12 hours, 24 hours, 4 days and 7 days in $37.^{\circ}C$, 5% $CO_2$ incubator. The results of the experiments were analyzed by counting the cells and measuring the protein contents at 1 day, 4 days and 7 days. The results of this study were as follows: l. CLEARFIL NEW BOND, LITE-FIL BOND, GLUMA 3 Primer and GLUMA 4 Sealer showed cytotoxicity compared to the control group in the cell counts and the protein contents. 2. GLUMA 4 Sealer showed the least cytotoxicity among the three dentin bonding agents. 3. The results of the cell count were simialr to the results of protein content measurement. 4. LITE-FIL BOND exhibited marked cytotoxicity during 1 day, but, the cytotoxicity was slightly reduced after 4 and 7 days. 5. In GLUMA 3 Primer group, it was not possible to count the cell numbers and measure the protein contents, but the degeneration of cells was observed under the inverted phase-contrast microscope.

• 대한소아치과학회지
• /
• 제44권3호
• /
• pp.358-364
• /
• 2017

소아치과 영역에서 수복 치료에 널리 쓰이는 레진 치료의 술식 민감성 및 시간 감소에 대한 꾸준한 노력으로 새로운 접착제의 개발이 이루어지고 있는데 최근 출시된 접착제와 기존에 널리 쓰이는 두 단계 접착제와 비교 분석하여 임상적으로 적용하기에 어떠할지 평가해 보고자 하였다. 본 연구에서는 78개의 건전한 소구치를 3군으로 나누어 순면 법랑질에 새로 개발된 $Tetric^{(R)}$ N-Bond Universal (Ivoclar Vivadent, Liechtenstein)과 $GC^{(R)}$ G-Premio BOND (GC Co., Japan)를 실험군으로 하고 기존의 5세대 $3M^{TM}$ Single Bond2 (3M ESPE, USA)를 대조군으로 설정하여 동일하게 $Filtek^{TM}$ Z-350 (3M ESPE, USA)복합 레진을 접착시킨 후 접착제에 따른 전단접착강도를 비교 평가하였다. 그 결과 산부식 과정을 따로 적용하지 않은 두 실험군에서 각각의 전단접착강도가 산부식 과정을 포함한 대조군의 결과보다 통계학적으로 유의성 있게 낮은 결과를 나타내었다. 또한 새로 개발된 두 접착제간 비교에서는 $Tetric^{(R)}$ N-Bond Universal 제품이 $GC^{(R)}$ G-Premio BOND 제품보다 전단 접착 강도가 유의성 있게 큰 것으로 나타나 임상에서 제품을 선택할 때 참조할 수 있을 것으로 생각된다.