• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2014

Purpose: The aim of this study was to investigate differences between the morphology of the mandibular symphysis and four facial skeletal types. Materials and Methods: 40 cone-beam computed tomographies were selected and classified in to 4 groups according to their vertical and anterior-posterior skeletal patterns. The bone volume ($mm^3$) of the symphysis, the cross sectional area corresponding to the 4 mandibular incisors' axis: the cross sectional area of total bone ($mm^2$), the area of the cancellous bone ($mm^2$) and the thickness (mm) of labial and lingual alveolar bone at 2 mm, 3 mm under the cemento-enamel junction (CEJ) were measured. General linear model (GLM), Kruskal-Wallis test and Tukey honestly significant difference (HSD) test were subsequently used for statistical analysis. Results: The lingual cortical bone thickness of the lateral incisors at 2, 3 mm under CEJ was greater in the Class I low angle group than the other 3 groups (P < 0.05). There were no statistically significant differences in the volume of the mandibular incisor bony support, cross-sectional area of total bone and cancellous bone at the mandibular incisor' axis. Conclusion: Patients in Class I, low angle group have a thicker lingual mandibular symphysis than Class I, high angle patients.

• Journal of Periodontal and Implant Science
• /
• v.37 no.1
• /
• pp.115-124
• /
• 2007

Silica is known as a promising osteoconductive material, and polycaprolactone is a bioactive and degradable material. The purpose of this study was to monitor the differentiation of MC3T3-E1 cells cultured on the layer-built silica/poly caprolactone non-woven fabric produced by electrospinning. Non-woven fabric (silica, polycaprolactone, PSP, SPS) was made by electrospinning and they were inserted in the 48 well cell culture plate. MC3T3-E1 cells were prepared by subculture. Cells were seeded to each well $1{\times}10^5$ concentration per well. Dulbecco's modified eagle medium with 10% FBS and 1% antibiotic-antimycotic solution was used. Confocal laser scanning microscope was taken 4 hours after incubation (95% air. 5% $CO_2$, $37^{\circ}C$). Cell proliferation was monitored by spectrophotometer on 1, 7, 14 days, and the morphology of the growing cells was observed by field emission scanning electron microscope. To monitor the differentiation of osteoblasts on the materials, MC3T3-E1 cells were incubated in 48 well culture plate after seeding with the density of $1{\times}10^5$ concentration. Then ELISA kit & EIA kit were used on to assess osteocalcin and osteopontin expression respectively. The other conditions were the same as above. MC3T3-E1 cells were proliferated well on all of the materials. There were no statistical differences among them. The osteopontin expression of silica, PSP, SPS was significantly higher than other groups on day 3 (p/0,05), but after that time, there were no statistically signigicant differences. The osteocalcin expression was significantly higher in silica and PSP than other groups on day 14. These findings show that PSP was as good as silica on the effect of osteoblast differentiation. The PSP non-woven fabric may have the possibility as bone graft materials.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10659-10663
• /
• 2015

Background: Rapamycin is an effective anti-angiogenic drug. However, the mode of its action remains unclear. Therefore, in this study, we aimed to elucidate the antitumor mechanism of rapamycin, hypothetically via apoptotic promotion, using MCF-7 breast cancer cells. Materials and Methods: MCF-7 cells were plated at a density of $1{\times}10^5$ cells/well in 6-well plates. After 24h, cells were treated with a series of concentrations of rapamycin while only adding DMEM medium with PEG for the control regiment and grown at $37^{\circ}C$, 5% $CO_2$ and 95% air for 72h. Trypan blue was used to determine the cell viability and proliferation. Untreated and rapamycin-treated MCF-7 cells were also examined for morphological changes with an inverted-phase contrast microscope. Alteration in cell morphology was ascertained, along with a stage in the cell cycle and proliferation. In addition, cytotoxicity testing was performed using normal mouse breast mammary pads. Results: Our results clearly showed that rapamycin exhibited inhibitory activity on MCF-7 cell lines. The $IC_{50}$ value of rapamycin on the MCF-7 cells was determined as $0.4{\mu}g/ml$ (p<0.05). Direct observation by inverted microscopy demonstrated that the MCF-7 cells treated with rapamycin showed characteristic features of apoptosis including cell shrinkage, vascularization and autophagy. Cells underwent early apoptosis up to 24% after 72h. Analysis of the cell cycle showed an increase in the G0G1 phase cell population and a corresponding decrease in the S and G2M phase populations, from 81.5% to 91.3% and 17.3% to 7.9%, respectively. Conclusions: This study demonstrated that rapamycin may potentially act as an anti-cancer agent via the inhibition of growth with some morphological changes of the MCF-7 cancer cells, arrest cell cycle progression at G0/G1 phase and induction of apoptosis in late stage of apoptosis. Further studies are needed to further characterize the mode of action of rapamycin as an anti-cancer agent.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.893-899
• /
• 2004

Even though Ti-6Al-4V has gained popularity as an implant material, the possible dissolution of Al and V ions in body fluids remains a matter of concern. Though commercially pure Ti (Cp-Ti) overcomes this problem, the mechanical strength of pure titanium remains very low. Thus, in this experiment Cp-Ti was processed by Equal channel angular processing (ECAP), in order to increase the mechanical strength. The biocompatibility of ECAP-Ti, Cp-Ti and Ti-6Al-4V was examined by the apatite formation on each sample surface, after treating the surface with 5M NaOH and soaking in Simulated body fluids (SBF). Initially, the samples were mechanically polished on silicone carbide paper (#2000). The polished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. The NaOH treated samples were washed gently with distill water and dried at $40^{\circ}C$ for 1 day. The dried samples were heat treated in air at $600^{\circ}C$ for 1 hour. The surface morphology of these samples were studied using SEM and XRD. The SEM studies showed network of pores in all samples. The XRD showed oxide layer formation on Cp-Ti and Ti-6Al-4V. samples. However the oxide layer in ECAP-Ti was not substantial. These samples were immersed in SBF, kept at $36.5^{\circ}C$ for seven days period. At the end of 7 days, the apatite formation was confirmed only on Cp-Ti and was not observed in Ti-6Al-4V and ECAP-Ti. These observations of apatite formation relate to the fact that Cp-Ti showed greater oxide layer than other samples. The apatite examined was confirmed as tricalcium phosphate (TCP) using EDS and XRD.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.613-625
• /
• 2006

Periodontal ligament(PDL) cells and human gingival fibroblasts(HGFs) play important roles in development, regeneration, normal function, and pathologic alteration. PDL cells and HGFs have the similarity related with general characteristics of fibroblast such as spindle shaped morphology, the presence of vimentin intermediate filament and the synthesis of interstitial collagens and fibronectin. There were many studies about the differences between PDL cells and HGFs, but they were not about whole gene level. In this study, we tried to explain the differences of gene expression profiles between PDL cells and HGFs, and the differences among three individuals by screening gene expression patterns of PDL cells and HGFs, using cDNA microarray. Although there were some variants among three experiments, a set of genes were consistentely and differentially expressed in one cell type. Among 3,063 genes, 49 genes were more highly expressed in PDL cells and 12 genes were more highly expressed in HGFs. The genes related with cell structure and motility were expressed more highly in PDL cells. These are cofilin 1, proteoglycan 1 secretory granule, collagen type I(${\alpha}$ 1), adducin gamma subunit, collagen type III(${\alpha}$ 1), fibronectin, lumican(keratan sulfate proteoglycan), and ${\alpha}$ -smooth muscle actin. Tissue inhibitor of metalloproteinase known as the enzyme controlling extracellular matrix with matrix metalloproteinase is more highly expressed in PDL cells, osteoprotegerin known as osteoclastogenesis inhibitory factor is more highly expressed in HGFs. We performed northern blot to verify cDNA microarray results on selected genes such as tissue inhibitor of metalloproteinase, fibronectin, osteoprogeterin. The result of northern blot analysis showed that each cell expressed the genes in similar pattern with cDNA microarray result. This result indicates that cDNA microarray is a reliable method in screening of gene expression profiles.

• Korean Journal of Cleft Lip And Palate
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2010

구순구개열은 선천성 악안면 기형중에서 발생률이 가장 높은 질환이며 특히 동양인에게 높은 빈도로 발생된다. 그리고 순구개열에서는 파열부 조직의 선천적 상실과 파열부 봉합 수술 후 형성된 반흔에 의한 상악골의 열성장과 상악궁의 협착, 코의 형태 이상, 등과 함께 치아의 수, 크기와 형태 및 맹출 이상도 높은 빈도로 동반된다. 선천성 치아 발육 이상이 구순열 또는 구개열 가진 환자에게서 종종 보고되고 있다. 이런 치아 이상은 과잉치, 결손치, 크기, 형태, 맹출시기, 법랑질 광화 등의 많은 특징을 포함한다. 이번 연구의 목적은 다음과 같다. 1. 구순열 또는 구개열을 가진 환자의 선천성 치아 결손 발병률을 결정하여 정상인과 비교하는 것이다. 2. 상하악에서 파열이 있는 부위와 없는 부위의 제2소구치 결손가능성을 비교 하는 것이다. 구강악안면외과에서 구순구개열로 진단한 환자 중 2005년 1월~2009년 8월까지 전북대학교 구강악안면외과에서 치조열부위 자가골이식수술을 받은 32명의 환자로 초진시의 교정 chart, 구강악안면외과 chart, x-ray(파노라마, 치근단사진, 교합사진(상악), 석고 모델, 구강내 외 임상사진을 사용하여 순구개열군 별로 매복치, 과잉치, 결손치, 왜소치의 유무와 위치를 조사하여 다음과 같은 결론을 얻었다. 1. 결손치는 비교적 높은 발생빈도(53.1%)를 보였으며, 치아별 발생빈도는 상악 측절치와 상악 제2소구치, 하악 제2소구치 순이었다. 구순구개열군이 구순치조열군에 비해 발생률이 높게 나타났다. 그리고 구순구개열군 내에서 양측성이 편측성에 비해 결손치의 발생률이 높게 나타났다. 2. 왜소치는 71.6%에서 발견되었으며, 치아별 발생빈도는 상악측절치에서 가장 많았다. 구순치조열군이 구순구개열군에 비해 발생률이 높게 나타났다. 3. 치조열을 가진 환자에 있어 상/하악간 제2소구치의 선천적 결손에 유의한 차이가 있었다. 4. 구순구개열이 인접한 상악측절치의 발생중인 미성숙 조직에 영향을 미치며 파열부위와 좀 더 떨어져 있는 상악 제2소구치에도 일정한 영향을 미침을 이번 연구를 통해 다시 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.323-334
• /
• 1988

The purpose of this study was to observe the effect of dentin surface conditioners on the dentin surfaces. Freshly extracted human molars were used in this study. They were stored at $4^{\circ}C$ saline solution before experiment. The crown portions of the teeth were cut in various directions by means of wet diamond point to expose dentin which include transverse, vertical oblique, horizontal and oblique cut to the long axis (Fig. 1). Each tooth was then mounted with self curing acrylic resin in brass ring to expose the flattened dentin surfaces. Final finish was accomplished by grinding the dentin specimens with wet No. 180 and No. 600 grit silicon carbide abrasive paper until a 6.0mm in diameter on a dentin surface was exposed without pulp exposure. The specimens were divided into 9 groups according to the modes of dentin treatment procedure. The following surface treatments were applied on these preparation surfaces; Group 1: unetched (control group) after finish with No. 600 silicon carbide abrasive paper. Group 2: etched with 30% phosphoric acid for 60s Group 3: etched with 10-3 solution for 60s Group 4: Cleaned with 5% NaOCl for 30s Group 5: applied Dentin Adhesit Group 6: cleaned with 5% NaOCl followed by applying the Dentin Adhesit$^{(R)}$ Group 7: applied Photo Bond on the unetched dentin followed by applying the Photo Clearfil Bright Group 8: Etched with 30% phosphoric acid followed by applying Photo Bond and Photo Clearfil Bright Group 9: etched with 10-3 solution followed by applying Photo Bond and Photo Clearfil Bright All the specimens were stored in $37^{\circ}C$ under 50% relative humidity for 24 hours before observations. The specimens in 7, 8, and 9 group, omitting the group 1 to 6, were demineralized in 10% HCl for 10s in order to observe the resin tags. All the specimens in each group were then dried at room temperature. The dried specimens were ion coated with Eiko ion coater (Eiko-engineering Co.), and observed in Hitachi S-430 Scanning electron microscope (Hitachi, Co. Tokyo) at 15KV. The following results were obtained as follows; 1. The smear layers were still remained in group 1,2,4,5, and 6. 2. There is no effect of 5% NaOCl and 30% phosphoric acid on the changes of dentin morphology 3. The dentin treated with 10-3 solution, indicating the tubules opened when the smear layer and the dental plug dissolved. 4. In case of applying the bonding agents the resin tag was not formed at the deep area of dentinal tubules, but in case of applying the Dentin Adhesit$^{(R)}$ that was not.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.411-421
• /
• 1993

The purpose of this study was to assess the effect of polycaprolactone strip with minocycline on the periodontal pocket in humans and the various clinical parameters in rapidly progressive periodontitis. Nine patients with rapidly progressive periodontitis were selected for the study. They had not taken antibiotics for 6 months and had no history of dental treatment for 6 months before the study. They were in good general health. By the split-mouth method, patients received a supragingival scaling, experimental group (9sites) were subjected to subgingival placement of polycaprolactone strips(1 strip) containg 30% minocyclne and control group (9 site) were subjected to subgingival placement of not polycaprolactone strips(1 strip) containing 30 A Minocycline. Strips were replaced with freshly filled ones at 1 week and 2 week. All strips were removed from pockets at 3 week Clinical examination (plaque index, gingival index, probing pocket depth) and distribution on the bacteria morphology of subgingival plaque were monitored on baseline (0 week), 1, week, 2 week, 4 week and 8 week. The result were as follows : 1. Plaque index in experimental group was not significantly reduced during all weeks(P<0.05), but slightly reduced at 2, 4 and 8 weeks and that in control group was not significantly reduced during monitoring period. 2. Probing pocket depth was significantly reduced at 2, 4 and 8 weeks(P<0.05) in experimental group, but that in control group was not siginificantly changed during monitoring period. 3. Gingival index was significantly improved at 2, 4 and 8 weeks(P<0.05) in experimental group but that in control group was not significantly changed. 4. Percentage of cocci was significantly increased at 2, 4 and 8 weeks in experimental group but that in control group was not significantly changed. 5. Percentage of non-motile rods in both group were not significantly changed when compared with those of baseline(0 week) (P<0.05). 6. Percentage of motile rods was siginificantly reduced at 1, 2 and 4 weeks in experimental group (p<0.05) but that in control group was not significantly changed. 7. Percentage of spirochetes was siginificantly reduced during all weeks(P<0.05) but that in control group was not significantly changed. The result showed that polycaprolactone containing 30% minocycline effect the clinical index and bacterial morphotype.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.337-342
• /
• 2000

Purpose : The purpose of this study was to analyze the lower third facial changes in frontal view after mandibular setback surgery. Materials and Methods : In this study, fifteen subjects(6 males and 9 females) with class III dental and skeletal malocclusions who were treated with BSSRO(Bilateral Sagittal Split Ramus Ostetomy) were used. Frontal cephalometric radiographs were taken preoperatively and more than 6 months postoperatively, and hard tissue(H2-Hl) and soft tissue changes (S2-S1) were measured on vertical and horizontal reference lines. In 15 cases, changes which developed more than 6 months after surgery were studied. Results : The results were as follows. 1. In the facial height, hard tissue $decreased(2.46{\pm}2.76mm)$ with statistical significance(P<0.01), and soft tissue also $decreased(1.64{\pm}3.66mm)$. As a result, the facial height generally becomes shorter after sagittal split ramus osteotomy. 2. In the mandibular width, hard tissue $decreased(2.08{\pm}3.59mm)$ with statistical sgnificance(P<0.05), but soft tissue $increased (2.14{\pm}5.73mm)$ without statistically significant difference(P>0.05) postoperatively. 3. In the facial index, hard tissue $decreased(0.23{\pm}2.21%)$, but soft tissue $increased(2.41{\pm}3.46%)$ with statistical significance. Conclusion : One of the main purpose of orthognathic surgery is to achieve facial esthetics and harmony. In order to fullfill this purpose, it is important to carry out a precise presurgical treatment planning by estimating the changes of frontal profile after surgery.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.189-193
• /
• 1999

The response of ameloblast to long term (3 weeks) exposure to fluoride was examined in continuously erupting mandibular incisors of pregnancy rats as compared to control rats receiving a similar diet (Teklad L-356) but no sodium fluoride in there drinking water. Rats were started on water containing 0 ppm, 100 ppm, 200 ppm, and 300 ppm NaF at the beginning of pregnancy. To examine on the ultrastructural changes of the ameloblast, electron microscopy was used. The results indicated that rat incisors expressed two major changes in normal amelogenesis that could be attributed to chronic fluoride treatment. The fluoride produces marked alteration in the fine structure of ameloblast from teeth of young rats, such as large confluent distensions of the endoplasmic reticulum and swelling of isolated mitochondria, in particular on the morphology of the rough-surfaced endoplasmic reticulum. A graded series of alterations to these organelles were produced, and the severity of the changes would seem to be dependent on dose and time. This experimental data suggested that exposure prolonged of animal to high level of fluoride appears to induce morphological changes in the normal appositional growth and initial mineralization of enamel created during amelogenesis.