• The Journal of Advanced Prosthodontics
• /
• 제12권1호
• /
• pp.33-37
• /
• 2020

PURPOSE. The purpose of this study is to evaluate the effects of type of magnet attachment and implant angulation in two implant overdenture models. MATERIALS AND METHODS. Magnet attachments used in this study were flat and dome types (MGT5515, MGT5520D, Dentium Co., Seoul, Korea). Two implants with keepers were inserted in the resin blocks at a distance of 24 mm. For the first model, the implants were parallel to the vertical and perpendicular to the horizontal; for the second model, both were angulated 5 degrees to the mesial; for the third model, both were angulated 10 degrees toward the mesial. The retentive force was measured in both vertical and lateral directions. Statistical analyses were performed using SPSS software version 22.0 (α=.05). RESULTS. The flat type magnet attachment showed the highest lateral retentive force in the 20° divergent group (P<.05) and the dome type magnet attachment showed the highest lateral retentive force in the parallel group (P<.05). The vertical and lateral retentive force of the dome type magnet attachment was greater than that of the flat type magnet attachment in every direction (P<.05). CONCLUSION. Within the limitations of this study, the dome shape magnet attachment can resist vertical and lateral retentive force more superiorly than the flat type magnet attachment, regardless of angle, in the mandibular two implant model.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.171-179
• /
• 2016

Objective: The primary aim of the study was to generate new prediction equations for the estimation of maxillary and mandibular canine and premolar widths based on mandibular incisors and first permanent molar widths. Methods: A total of 2,340 calculations (768 based on the sum of mandibular incisor and first permanent molar widths, and 1,572 based on the maxillary and mandibular canine and premolar widths) were performed, and a digital stereomicroscope was used to derive the the digital models and measurements. Mesiodistal widths of maxillary and mandibular teeth were measured via scanned digital models. Results: There was a strong positive correlation between the estimation of maxillary (r = 0.85994, $r^2=0.7395$) and mandibular (r = 0.8708, $r^2=0.7582$) canine and premolar widths. The intraclass correlation coefficients were statistically significant, and the coefficients were in the strong correlation range, with an average of 0.9. Linear regression analysis was used to establish prediction equations. Prediction equations were developed to estimate maxillary arches based on $Y=15.746+0.602{\times}sum$ of mandibular incisors and mandibular first permanent molar widths (sum of mandibular incisors [SMI] + molars), $Y=18.224+0.540{\times}(SMI+molars)$, and $Y=16.186+0.586{\times}(SMI+molars)$ for both genders, and to estimate mandibular arches the parameters used were $Y=16.391+0.564{\times}(SMI+molars)$, $Y=14.444+0.609{\times}(SMI+molars)$, and $Y=19.915+0.481{\times}(SMI+molars)$. Conclusions: These formulas will be helpful for orthodontic diagnosis and clinical treatment planning during the mixed dentition stage.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권1호
• /
• pp.29-37
• /
• 2023

Background: A high incidence (40-73%) of postoperative nausea and vomiting (PONV) has been reported following orthognathic surgery, and various risk factors have been associated with it. Identifying PONV risk factors based on initial onset time will help establish preventive measures. This study aimed to identify factors that are significantly related to PONV based on the initial onset time after orthognathic surgery. Methods: This study included 590 patients who underwent orthognathic surgery. Multivariate logistic regression analysis was performed to identify the risk factors that are significantly related to PONV. The objective variables were classified into three categories: no PONV, early PONV (initial onset time: 0-2 h after anesthesia), and late PONV (initial onset time: 2-24 h after anesthesia). The explanatory variables included relevant risk factors for PONV, as considered in previous studies. Results: Total intravenous anesthesia with propofol was a significant depressant factor for early PONV (adjusted odds ratio [aOR] = 0.340, 95% confidence interval [CI] = 0.209-0.555) and late PONV (aOR = 0.535, 95% CI = 0.352-0.814). The administration of a combination of intraoperative antiemetics (vs. no administration) significantly reduced the risk of early PONV (aOR = 0.464, 95% CI = 0.230-0.961). Female sex and young age were significant risk factors for late PONV (aOR = 1.492, 95% CI = 1.170-1.925 and unit aOR = 1.033, 95% CI = 1.010-1.057, respectively). Conclusion: We identified factors that are significantly related to PONV based on the initial onset time after orthognathic surgery. Total intravenous anesthesia with propofol significantly reduced the risk of PONV not only in the early period (0-2 h after anesthesia) but also in the late period (2-24 h after anesthesia).

• 대한치과기공학회지
• /
• 제30권1호
• /
• pp.131-139
• /
• 2008

It's very important to find the most appropriate adhesion technique available, taking into consideration factors such as biocompatibility, non-corrosiveness, mechanical stability, etc. Laser welding is the best choice you can make because from a mechanical viewpoint, a laser welded surface has better particle structure than does a casted particle structure. Furthermore, it requires no additional material and the same metal alloy which is used when casting can be used. Therefore, the resulting mixture will consist of a single alloy, instead of utilizing different alloy combinations. Another benefit is the low economic cost. The most beneficial aspects of laser welding is that it is biologicallly friendlly, doesn't require soldering, can fuse different metal alloys together, and can weld on heat-sensitive spots(E.g. around resin or ceramic). A consistent strong pulse is possible. This technique is capable of welding on master models and creates accurate welds. It is capable of due to its stronger, non-corrosive microscope, which allows 25times magnification during the soldering process. This is possible because of its high stability from the tiny particle structure.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.151-156
• /
• 2016

Purpose: The dental implant should be enough to endure chewing load and it's required to have efficient design and use of implant to disperse the stress into bones properly. This study was to evaluate the stress distribution on a supporting bone by lengths and diameters of the implant fixture. Methods: The modeling and analysis of stress distribution was used for the simple molar porcelain crown model by Solidworks as FEM program. It was designed on applying with tightening torque of 20 Ncm of a abutment screw between a cement retained crown abutment and a fixture. The fixtures of experimental model used 10, 13mm by length and 4, 5mm by diameter. A external vertical loading on the two buccal cusps of crown and performed finite element analysis by 100 N. Results: The maximum von Mises stress(VMS) of all supporting bone models by fixture length and diameter were concentrated on the upper side of supporting compact bone. The maximum stress of each model under vertical load were 164.9 MPa of M410 model, and 141.2 MPa of M413 model, 54.3 MPa of M510 model, 53.6 MPa of M513 model. Conclusion: The stress reduction was increase of fixture's diameter than it's length. So it's effective to use the wider fixture as possible to the conditions of supporting bone.

• Journal of Oral Medicine and Pain
• /
• 제5권1호
• /
• pp.5-10
• /
• 1980

Numerous investigators have pointed out that the force of the tongue against the teeth within the dental arches is normally compensated for by the action of the musculature of the cheeks and lips, and that the tongue at rest occupies a large part of the oral cavity. The purpose of this study was to estimate the maximum areas of the tongue movement by measuring the inner area of the dental arches of both the maxilla and the mandible. This study was based on the study models of 30 children and 128 adults who had clinically good occlusion. There were 15 male and 15 female children whose ages ranged from four years to seven years and 82 male and 46 female adults whose ages ranged from fifteen years to fifty four years. The obtained results were as follows : 1. The mean of the maximum areas within the primary dental arches of both the maxilla and the mandible were $7.06\pm0.8\textrm{cm}^2, 5.49\pm0.77\textrm{cm}^2$ in male children and $6.82\pm0.98\textrm{cm}^2, 5.28\pm0.80\textrm{cm}^2$ in female children respectively. 2. The mean of the maximum areas within the permanent dental arches of both the maxilla and mandible were $17.01\pm2.38\textrm{cm}^2, 13.57\pm1.57\textrm{cm}^2$ in male and $16.75\pm2.08\textrm{cm}^2, 13.36\pm1.01\textrm{cm}^2$ in female respectively.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.202-209
• /
• 2021

By classifying temporary denture production for surgical guides, digital guide-based surgery, and final prosthesis production, the problems of each process were assessed in advance and the factors that could be improved were confirmed in this study. The manufacturing process of fusion dental prosthesis uses virtual programs and computed tomography images to manufacture devices using the latest technologies of computer-aided design/computer-aided manufacturing and three-dimensional printing, which enables implants to be placed in the desired location in advance. Moreover, implant placement is not dependent on the skill and condition of the dentist, and because it uses a computer system, it can always be performed at a constant and optimal position. This can reduce the remanufacturing rate compared with the general method, shorten the treatment period, and eliminate patient discomfort. Unlike the traditional method of using impression materials and plaster models, digital fusion dental prostheses would be evaluated as a technology for producing prosthesis through professional design technology and communication.

• International Journal of Oral Biology
• /
• 제42권3호
• /
• pp.91-97
• /
• 2017

Although anti-aging activities of melatonin, a hormone secreted by the pineal gland, have been reported in senescence-accelerated mouse models and several types of cells, its impact and mechanism on the senescence of human dental pulp cells (HDPCs) remains unknown. In this study, we examined the impact of melatonin on cellular premature senescence of HDPCs. Here, we found that melatonin markedly inhibited senescent characteristics of HDPCs after exposure to hydrogen peroxide ($H_2O_2$), including the increase in senescence-associated ${\beta}$-galactosidase (SA-${\beta}$-gal)-positive HDPCs and the upregulation of p21 protein, an indicator for senescence. In addition, as melatonin attenuated $H_2O_2$-stimulated phosphorylation of c-Jun N-terminal kinase (JNK), while selective inhibition of JNK activity with SP600125 significantly attenuated $H_2O_2$-induced increase in SA-beta-gal activity. Results reveal that melatonin antagonizes premature senescence of HDPCs via JNK pathway. Thus, melatonin may have therapeutic potential to prevent stress-induced premature senescence, possibly correlated with development of dental pulp diseases, and to maintain oral health across the life span.

• Journal of Korean Academy of Oral Health
• /
• 제41권4호
• /
• pp.267-273
• /
• 2017

Objectives: Unmet needs for dental treatment are one of the potential contributing factors to poor oral health because oral health problems worsen if left untreated. This study aimed to demonstrate the prevalence of and the causes for unmet dental needs, and to evaluate the association between unmet needs for dental treatment and oral health status. Methods: Data on 3,883 subjects aged ${\geq}18years$ from the Korean National Oral Health Survey 2006 were analyzed. Information regarding unmet needs for dental treatment was obtained using standardized questionnaires. Eight trained dentists examined decayed, missing, or filled teeth (DMFT). Multiple regression models were built to assess the association between unmet needs for dental treatment and the DMFT scores. Results: The prevalence of perceived unmet needs for dental treatment was 34.7% among the adult Korean population. Economic constraints were the main cause (38.6%) for unmet dental needs. The average DMFT scores were higher in the subjects with unmet needs for dental treatment than in those without. In individuals with unmet needs for dental treatment within the past 1 year, the number of decayed teeth after adjusting for confounders was likely to be greater by 0.58 and that of missing teeth by 0.27 compared to that in their counterparts with no unmet dental needs in the past 1 year. Conclusions: Perceived unmet needs for dental treatment were significantly associated with poor oral health status among the adult Korean population. Further studies are needed to clarify the direct and indirect effects of unmet needs for dental treatment on an individual's oral health status by investigating critical variables of the causal pathways among perceived dental needs, dental care utilization, and oral health status.

• 대한치과교정학회지
• /
• 제37권5호
• /
• pp.331-340
• /
• 2007

이 연구는 한국인 여자 유명 모델과 일반인의 정면입술의 차이점을 비교하여 아름다운 입술의 특징을 규명하며 양악 전방 분절골절단술을 시행한 환자에서 정면입술의 변화를 측정하고 그 수술 결과를 한국인 모델과 비교하여 차이점을 알아보고자 하였다. 한국인 유명 모델 30명, 일반인 26명과 양악 전방 분절골절단술을 받은 환자의 10명을 대상으로 정면입술 부위의 12개의 선 길이, 홍순의 5개의 각도와 둘레 및 면적을 측정하였고, 통계분석은 unpaired & paired t-test를 이용하였다. 한국인 유명 모델 군과 일반인 군의 비교에서 하안면 얼굴 폭경, 하안면 수직 길이, 상홍순의 높이, 하순의 길이, 상홍순의 구각부 각도와 central bow의 각도는 의미 있는 차이로 일반인 군보다 유명 모델 군에서 작았다. 그러나, 입술의 폭, 하홍순의 높이, Cupid's bow tip간 거리와 하홍순의 구각부 각도는 유명 모델 군에서 컸고 입술의 둘레와 전체 면적에서도 일반인 군보다 쳐다 양악 전방 분절골절단술을 받은 환자의 정면입술에서는 하안면 얼굴 폭경, 상홍순의 높이, Cupid's bow tip에서 구각부까지의 길이와 상홍순의 면적이 통계적으로 의미 있는 변화를 보였고 한국인 유명 모델과의 비교에서 비슷한 수치를 나타내었지만 상순의 길이는 반대로 증가하였다. 연구의 결과는 교정치료 혹은 양악 전방 분절골절단술을 계획할 때 정면 입술 심미성을 평가하는데 도움이 될 것으로 생각된다.