• Journal of Periodontal and Implant Science
• /
• v.43 no.6
• /
• pp.262-268
• /
• 2013

The use of dental implants has become a mainstay of rehabilitative and restorative dentistry. With an impressive clinical success rate, there remain a few minor clinical issues with the use of implants such as peri-implant mucositis and peri-implantitis. The use of laser technology with implants has a fascinating breadth of applications, beginning from their precision manufacturing to clinical uses for surgical site preparation, reducing pain and inflammation, and promoting osseointegration and tissue regeneration. This latter aspect is the focus of this review, which outlines various studies of implants and laser therapy in animal models. The use of low level light therapy or photobiomodulation has demonstrated its efficacy in these studies. Besides more research studies to understand its molecular mechanisms, significant efforts are needed to standardize the clinical dosing and delivery protocols for laser therapy to ensure the maximal efficacy and safety of this potent clinical tool for photobiomodulation.

• Structural Engineering and Mechanics
• /
• v.55 no.1
• /
• pp.65-78
• /
• 2015

In recent years, implants have gained growing importance in all areas of medicine. The success of the treatment depends on many factors affecting the bone-implant, implant-abutment and abutment-prosthesis interfaces. In this paper, static and dynamic behaviors of the dental prosthesis are investigated. Three-dimensional finite element models of dental prosthesis were constructed. Dynamic loads in 5 sec applied on occlusal surface. Therefore, FEA was selected for use in this study to examine the effect of the static and dynamic loads on the stress distribution for an implant-supported fixed partial denture and supporting bone tissue.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.4
• /
• pp.435-445
• /
• 2020

Objectives: This study investigated the relationship between obesity and dental caries of Korean adolescents. Methods: Data from the Korea National Health and Nutrition Examination Survey (KNHNES VI) (2013 to 2015) were used and targeted adolescents aged 13 to 18 years. For statistical analysis, the SPSS 18.0 program was used, and the significance level was set at 0.05. Results: For the general and health-related characteristics, female students (p=0.001) showed higher decayed, missing, and filled teeth (DMFT) index than male students. Furthermore, DMFT showed higher tendency, as age was higher (p<0.001). Smoking (p=0.011) and drinking experience (p=0.027) revealed higher DMFT. The dental caries experience was significantly different among students who were female (p=0.033), older (p=0.001), and overweight or underweight (p=0.022). In the BMI for the general and health-related characteristics, male students had higher obesity rate than female students (p=0.003), and obese subjects had higher dental checkup in the last year (p=0.013). In multiple linear regression analysis of obesity and DMFT, the unadjusted model showed that the obesity group's DMFT was about 0.8 higher than that of the normal group (p=0.024). However, statistical significance was not shown in the adjusted models. In the logistic regression analysis of obesity and dental caries experience, the unadjusted model 1 (1.93 times), the adjusted model 2 (1.79 times), and model 3 (1.76 times) showed significantly higher dental caries experience. Conclusions: Both obesity and dental caries are related to diet habits and lifestyles and have a negative impact on adult health. Therefore, it is necessary to create a healthy social environment around the adolescent, and proper intervention through education is required to form healthy habits.

• Journal of Periodontal and Implant Science
• /
• v.45 no.1
• /
• pp.2-7
• /
• 2015

A fundamental problem in analyzing complex multilevel-structured periodontal data is the violation of independency among the observations, which is an assumption in traditional statistical models (e.g., analysis of variance and ordinary least squares regression). In many cases, aggregation (i.e., mean or sum scores) has been employed to overcome this problem. However, the aggregation approach still exhibits certain limitations, such as a loss of power and detailed information, no cross-level relationship analysis, and the potential for creating an ecological fallacy. In order to handle multilevel-structured data appropriately, mixed effects models have been introduced and employed in dental research using periodontal data. The use of mixed effects models might account for the potential bias due to the violation of the independency assumption as well as provide accurate estimates.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.5
• /
• pp.707-715
• /
• 2011

Objectives : The objective of this study was to assess a level of oral health related quality of life(OHRQoL) for rural communities elderly and to determine the association between OHRQoL and socio-economic position. Methods : The study population was elderly(60+year-old) residents of PyeongChang county, Jeongseon county, Yeongwol county, Gangwon province. A total of 171 people were invited to participate. Oral health related quality of life was measured using the GOHAI. The data were analyzed with Mann-Whitney U test or Kruskal-Wallis test and to assess socio-economic inequalities in OHRQoL(GOHAI), we used multi-variable logistic regression models. We used models adjusting for age, sex, family status factors(Model I) and compared them to models additionally adjusting for stress level(Model II). Results : There were significant differences in lower score of GOHAI at lower age group and live alone group. And we found that lower SES was significantly associated with lower score of OHRQoL. Social gradient in the score of OHRQoL persisted when adjusted for age, sex, family status, stress level. Conclusions : We recommend that oral health promotion program should be developed after due consideration SES for rural communities elderly because OHRQoL of rural communities elderly was low and association between SES and OHRQoL for rural communities elderly.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.296-305
• /
• 2016

This paper proposes a framework to automatically align Dental range image captured by depth sensors like the Microsoft Kinect. Aligning dental images by intraoral scanning technology is a difficult problem for applications requiring accurate model of dental-scan datasets with efficiency in computation time. The most important thing in dental scanning system is accuracy of the dental prosthesis. Previous approaches in intraoral scanning uses a Z-buffer ICP algorithm for fast registration, but it is relatively not accurate and it may cause cumulative errors. This paper proposes additional Alignment using the rough result comes after intraoral scanning alignment. It requires that Each Depth Image of the total set shares some overlap with at least one other Depth image. This research implements the automatically additional alignment system that aligns all depth images into Completed model by computing a network of pairwise registrations. The order of the each individual transformation is derived from a global network and AABB box overlap detection methods.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.197-201
• /
• 2020

Purpose: This study aimed to assess the quality of dental prostheses printed by digital light-processing (DLP) technology. Methods: Ten experimental models were prepared. The ten specimens that were printed by DLP technology constituted the DLP group. The ten specimens that were produced in the same model by the casting method constituted the control group. The marginal gaps of the 20 specimens produced were measured. These gaps were measured by a silicon replica technique at two abutments of the specimen. Therefore, 20 marginal gaps were measured in each group. An independent sample t-test was performed to compare the marginal gaps measured in the two groups (α=0.05). Results: According to the results of the measurement, there was a significant difference between the mean marginal gap of the control group (78.8 ㎛) and that of the DLP group (91.5 ㎛), p<0.001. Conclusion: Although the mean marginal gaps of dental fixed prostheses produced by the DLP method was higher than the mean marginal gap of those produced by the casting method, it was considered to be within the clinical threshold value suggested by some previous studies.

• Journal of Technologic Dentistry
• /
• v.44 no.4
• /
• pp.126-131
• /
• 2022

Purpose: The purpose of this study is to evaluate the quality of dental fixed prostheses fabricated by 3DP (three-dimensional printing). Methods: Ten main models were prepared for the study. Ten specimens were printed by 3DP (3DP group). Ten specimens were fabricated by the lost wax technique and casting method to complete the control group (LWC group). The marginal fit was measured for 20 specimens. The measurement of marginal fit was performed using the silicon replica technique. Finally, the marginal fit of 10 specimens from each group was calculated. An independent sample t-test was run to see if the calculated averages for the two groups were mutually significant (α=0.05). Results: According to the experimental results, the mean marginal fit of the 3DP group was 71.9 ㎛, and the LWC group was 55.3 ㎛. The means of the two groups were found to be significantly different (p<0.001) in the results of the independent sample t-test. Conclusion: The marginal fit of fixed dental prostheses produced by 3DP technology was examined with values greater than those fabricated by traditional technology. However, as it appeared to be a value within the range of clinically acceptable range recommended by numerous studies, it was determined that clinical application would be feasible.

• The korean journal of orthodontics
• /
• v.42 no.5
• /
• pp.235-241
• /
• 2012

Objective: The purpose of this study was to evaluate the validity of the 3-dimensional (3D) superimposition method of digital models in patients who received treatment with rapid maxillary expansion (RME) and maxillary protraction headgear. Methods: The material consisted of pre- and post-treatment maxillary dental casts and lateral cephalograms of 30 patients, who underwent RME and maxillary protraction headgear treatment. Digital models were superimposed using the palate as a reference area. The movement of the maxillary central incisor and the first molar was measured on superimposed cephalograms and 3D digital models. To determine whether any difference existed between the 2 measuring techniques, intra-class correlation (ICC) and Bland-Altman plots were analyzed. Results: The measurements on the 3D digital models and cephalograms showed a very high correlation in the antero-posterior direction (ICC, 0.956 for central incisor and 0.941 for first molar) and a moderate correlation in the vertical direction (ICC, 0.748 for central incisor and 0.717 for first molar). Conclusions: The 3D model superimposition method using the palate as a reference area is as clinically reliable for assessing antero-posterior tooth movement as cephalometric superimposition, even in cases treated with orthopedic appliances, such as RME and maxillary protraction headgear.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.23-29
• /
• 2015

Purpose: This study aimed to assess the reliability of measurements performed on three-dimensional (3D) virtual models of maxillary defects obtained using cone-beam computed tomography (CBCT) and 3D optical scanning. Materials and Methods: Mechanical cavities simulating maxillary defects were prepared on the hard palate of nine cadavers. Images were obtained using a CBCT unit at three different fields-of-views (FOVs) and voxel sizes: 1) $60{\times}60mm$ FOV, $0.125mm^3$ ($FOV_{60}$); 2) $80{\times}80mm$ FOV, $0.160mm^3$ ($FOV_{80}$); and 3) $100{\times}100mm$ FOV, $0.250mm^3$ ($FOV_{100}$). Superimposition of the images was performed using software called VRMesh Design. Automated volume measurements were conducted, and differences between surfaces were demonstrated. Silicon impressions obtained from the defects were also scanned with a 3D optical scanner. Virtual models obtained using VRMesh Design were compared with impressions obtained by scanning silicon models. Gold standard volumes of the impression models were then compared with CBCT and 3D scanner measurements. Further, the general linear model was used, and the significance was set to p=0.05. Results: A comparison of the results obtained by the observers and methods revealed the p values to be smaller than 0.05, suggesting that the measurement variations were caused by both methods and observers along with the different cadaver specimens used. Further, the 3D scanner measurements were closer to the gold standard measurements when compared to the CBCT measurements. Conclusion: In the assessment of artificially created maxillary defects, the 3D scanner measurements were more accurate than the CBCT measurements.