• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.153-158
• /
• 2021

X-ray image analysis is a very important field to improve the early diagnosis rate and prediction accuracy of periodontal disease. Research on the development and application of artificial intelligence-based algorithms to improve the quality of such dental X-ray images is being widely conducted worldwide. Thus, the aim of this study was to design a super-resolution algorithm for predicting periodontal disease and to evaluate its applicability in dental X-ray images. The super-resolution algorithm was constructed based on the convolution layer and ReLU, and an image obtained by up-sampling a low-resolution image by 2 times was used as an input data. Also, 1,500 dental X-ray data used for deep learning training were used. Quantitative evaluation of images used root mean square error and structural similarity, which are factors that can measure similarity through comparison of two images. In addition, the recently developed no-reference based natural image quality evaluator and blind/referenceless image spatial quality evaluator were additionally analyzed. According to the results, we confirmed that the average similarity and no-reference-based evaluation values were improved by 1.86 and 2.14 times, respectively, compared to the existing bicubic-based upsampling method when the proposed method was used. In conclusion, the super-resolution algorithm for predicting periodontal disease proved useful in dental X-ray images, and it is expected to be highly applicable in various fields in the future.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.73-81
• /
• 2002

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method is relatively simple with an acceptable accuracy. In this paper, a new method is studied to acquire 3D geometric data of the small object such as a die in stone model. When the devices, cameras, laser beam and object are in a perfect plane, the calculation becomes very simple with less error. But this paper shows that arbitrarily positioned system can also be used to obtain 3D data.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.185-196
• /
• 2018

Based on World Health Organization (WHO) children and adults have a problem with their oral health, such as Dental cavities and periodontal disease. It is not easy to obtain the high convince level of result of the dental and periodontal diseases. Because each of them have different degrees of uncertainty and there have several discounting factors (error rates) in different of survey. To solve this problem we propose the Dezert-Smarandache Theory (DSmT) for efficient combination of uncertain, imprecise and highly conflicting sources of information. Moreover, we apply the SEFP as a context reasoning. Finally, we make the simulation by using 12 surveys and compare Propotional Conflict Redistribution 5 (PCR5) and Dempster-Shafer Theory (DST) to show the belief or probability for the low, a heavy, high and ultra-high risk situation.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.5
• /
• pp.333-343
• /
• 2019

Objectives: This study aimed to evaluate the association between dental implants and cognitive function in community-dwelling older adults. Methods: Data were collected from the baseline survey (2016-2017) of the Korean Frailty and Aging Cohort Study. The study sample comprised 1115 community-dwelling people aged 70 years to 84 years who had 0-19 natural teeth. Dental implants and natural teeth were identified by panoramic radiography, while the cognitive function was assessed by the Korean version of the Mini-Mental State Examination (MMSE-KC). The association between dental implants and cognitive function was analyzed by multiple linear regression. Sensitivity analysis was performed to test for potential bias. Results: The mean number of natural teeth in the study population was 9.50 (standard deviation [SD], 6.42), and the mean MMSE-KC score was 24.93 (SD, 3.55). In the simple univariate analysis, tooth replacement, age, sex, smoking status, alcohol consumption, body mass index, osteoporosis, number of natural teeth, periodontitis, chewing discomfort, tooth-brushing frequency, education level, monthly household income, participation in economic activity, living alone, and marital status had a significant impact on the association. After adjusting for confounders, the association between dental implants and cognitive function remained significant (B, 0.85; standard error, 0.40; p<0.05). Age, body mass index, periodontitis, tooth-brushing frequency, and education level were also significantly associated with cognitive function. The results of the sensitivity analyses were consistent with those of the primary analysis. Conclusions: Dental implants were associated with cognitive function in older adults living in the community. Dental implants as tooth replacements may play a role in preserving cognitive function.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.2
• /
• pp.417-422
• /
• 1999

Purpose : The aim of this study was to assess the validity of standard deviation of gray scale histogram in digital subtraction radiography as a test parameter for superimposition error. Materials and Methods : Twenty periapical radiographs were used as baseline images and they were copied to exclude the influence of exposure geomety and contrast differences. These subsequent images were linearly displaced by 0.1-0.5 mm in the x-. y- and xy-directions, rotated by 0.5-3° and distorted by angular contraction of 1-5° in x- and y-axis before subtraction. The standard deviations of gray levels in the subtraction images were obtained and paired t-tests were performed. Pearson correlation coefficients(r) were calculated between the standard deviations and the superimposition errors. Results : Linear displacement showed high correlation coefficients of 0.997, 0.997 and 0.995 in x-. y- and xy-axis respectively. Statistically significant different standard deviation existed among all linearly displaced groups(p<0.05). Distortion showed relatively low correlation coefficients of 0.982 and 0.959 in x- and y-axis. The standard deviations between the two distortion groups were statistically significant different(p<0.05). Conclusion : Standard deviation of gray level distribution in digital subtraction images is satisfactory but not perfect similarity measure to assess the superimposition errors.

• Journal of Oral Medicine and Pain
• /
• v.6 no.1
• /
• pp.101-110
• /
• 1981

For the purpose of an estimation of age based on the changes in the human dental cavity caused by increase in age, 1,208 extracted teeth in the parts from central incisors and lateral incisors and lateral incisors to second premolars of upper and lower, right and left side were evaluated and analized all of surface index of pulp cavity. The results are as follows : 1. The surface index of pulp caxities of upper and lower, central and lateral incisors, and tend to decrease regularly as the age increase. So above teeth are more applicable to age estimation than canine and premolars. 2 For the purpose of age estimation by surface index of pulp cavity of central and lateral incisor, linear equations are as follows. Upper central incisor: X=(16.301-Y)/0.12 Upper lateral incisor: X=(16.620-Y)/0.11 Lower central incisor: X=(20.963-Y)/0.16 X=Age Y=Surface index of pulp cavity Correlation coefficient between chronologic age and estimated age is 0.699 3.The least error(3.3 yrs of age)reveals in 41-45 age group, which shows the highest possibility of estimation of age. The highest error(4.1 yrs of age)reveals in 61-65 age group and 56-60 age group.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.13-25
• /
• 1988

Bone destruction was induced experimentally by the insertion of a bit of the arsenic compound into the pulp chambers of the right premolars and the artificial bone defects were produced in the periapical regions of the left premolars in 7 dogs. The serial standardized periapical radiographs using aluminum stepwedge attached to the XCP instruments, and resin bite blocks were taken following insertion of arsenic compound and at 2, 4, 7, 10, 14, 17, 21, 24 and 28 days in case of bone destruction and following bone injury and weekly thereafter for a total of 14 weeks in case of bone formation. The errors of the method were determined with error estimators described by the Duinkerke. All radiographs were evaluated by the visual examination after joint evaluation by three dental radiologists and analysed with densitometer. The following results were obtained; 1. Analysis of the bone destruction process 1) The error of the method in estimating two distances proved to be small (S.D. for the measuring error; 0.04㎜, S.D. for the over-all error; 0.06㎜, S.D. for the positioning error; 0.05㎜) 2) The radiographic changes were observed after 7 days in 6 cases, 4 days in 1 case and 10 days in 1 case by the visual examination. 3) Aluminum equivalent values were diminished after 2 days and the diminution of 0.58±0.19㎜ was demanded to be detected by the visual examination. 2. Analysis of the bone formation process 1) The error of the method in estimating two distances proved to be small (S.D. for the measuring error; 0.03㎜, S.D. for the over-all error; 0.04㎜ S.D. for the positioning error; 0.04㎜) 2) The radiographic changes were observed after 2 weeks in 5 cases and 3 weeks in 2 cases by the visual examination. 3) Aluminum equivalent values were increased after 1 week and the increase of 0.45±0.15㎜ was demanded to be detected by the visual examination. 4) Aluminum equivalent values were increased continuously for 7 or 9 weeks but there as only extremely small change after 10 weeks.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.21.1-21.3
• /
• 2019

Background: Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative "eyeballing", with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant. Methods: A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument. Results: This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane. Conclusions: This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.

• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.267-272
• /
• 2013

Purpose: Demirjian's dental maturity scores and curves have been widely used for human age determination. Several authors have reported considerable differences between the true and estimated age based on the Demirjian curves, which have been accounted for by ethnicity. The purpose of the current study was to assess the role of ethnicity-specific dental maturation curves in age estimation of Saudi children. Materials and Methods: A sample of 452 healthy Saudi children aged 4 to 14 years were aged based on the original French-Canadian Demirjian curves and several modified Demirjian curves specified for certain ethnic groups: Saudi, Kuwaiti, Polish, Dutch, Pakistani, and Belgian. One-way ANOVA and a post hoc Scheff$\acute{e}$'s test were used to assess the differences between chronological age and dental age estimated by the different curves (P<0.05). Results: The curves designed for Dutch, Polish, Saudi, and Belgian (5th percentile) populations had a significantly lower error in estimating age than the original French-Canadian and Belgian (50th percentile) curves. The optimal curve for males was the Saudi one, with a mean absolute difference between estimated age and chronological age of 8.6 months. For females, the optimal curve was the Polish one, with a mean absolute difference of 7.4 months. It was revealed that accurate age determination was not related to certain ethnicity-specific curves. Conclusion: We conclude that ethnicity might play a role in age determination, but not a principal one.

• The Journal of the Korean dental association
• /
• v.16 no.2 s.105
• /
• pp.107-112
• /
• 1978

The followings are dealing with 10 dental alloys with less then 30% gold, manufactured by S company 7, and by H company 3. We could find several noticable things by examining them about tarnish and corrosion with human saliva and several other chemicals, and through metal microscopy. 1) After the samples were submerged in human saliva for 3 months, the colour of the samples were no remarkable change. 2) taking a consideration of the error of santorius balance, also there had been little corrosive changes in human saliva. 3) The colour of A-4 was changed into red in 0.05% HCI solution, while that of P-B was changed into black in 0.1% Na₂S solution and severely corroded samples, P-B, X, and Z lost their original colour and turned black. 4) In case of submerging in H₂NO₃reagent, 50%, it caused serious diminishing changes in weight, that is, X 2.7%, Pb 31.0%, Z 40.5%, and there happened tremble corrosive reaction. 5) Seeing them through metal microscopy, we can obserre the corroded samples changed into the shape of.