• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.63-74
• /
• 2009

Partial or complete prosthesis is needed when teeth are lost due to various kinds of reason. Artificial teeth recover occlusion instead of natural teeth. Artificial teeth are required of esthetics, fragile resistance and abrasive resistance. Artificial tooth is made of acrylic resin or porcelain. Nowadays, acrylic resin artificial teeth are mainly used. Acrylic resin teeth are occluded with natural teeth, gold alloy, Ni-Cr alloy or porcelain etc. Acrylic resin teeth have similar translucency, gloss of natural teeth. And it has good chemical bond with denture base material, but it has low wear resistance. The aim of this study is to compare wear resistance among several denture teeth(Endura, SR-orthosit-PE, Planustar) and between artificial resin denture teeth and opposing 3 restorative materials(gold, Ni-Cr alloy, porcelain). Wear tests were conducted with a rotating wear testing apparatus(pin-on-disk type wear tester) under conditions of rpm 180, 75 minutes and constant loading of 50N. The upper part was the cusp of maxillary first molar and the lower part was a disk type restorative materials. To make similar oral environment, water was supplied continually. The acrylic resin teeth wear was determined by weighing the cusp each 5 minutes during 75 minutes test. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows: 1. Wear rates of acrylic resin teeth opposing to the restorative materials were high in order of Porcelain, Gold, Ni-Cr alloy (p<.05). 2. Wear resistance rate opposing to the Porcelain disk, was shown in order of Endura, SR-orthosit-PE, Planustar. The wear rate of opposing to porcelain disk was above two times more than that of other groups (p<.05). 3. Wear resistance rates opposing to the Gold, Ni-Cr alloy disk, was shown in order of Endura, SR-orthosit-PE, Planustar (p<.05). 4. A degree of the surface hardness is directly proportional to the degree of wear resistance. There are statistically significant differences between each groups (p<.05).

• The Journal of the Korea Contents Association
• /
• v.17 no.2
• /
• pp.467-475
• /
• 2017

The purpose of this study is to investigate how the communication barriers which patients have at the dental clinic affect the patient's satisfaction and long term sustainable relationship. The subjects of this study were 214 patients from the dental clinic and the analysis was conducted using PASW Statistics 18.0 and IBM SPSS AMOS 21. As the results of factor analysis, the communication barriers were divided to four factors: one-sided communication, lack of trust and concern, patient and environment. In conclusion, the results of this study showed that the communication barriers which patients have with hygienist affected the patient's satisfaction and long term sustainable relationship. So It is imperative that the hygienist makes a concerted effort to ensure the comfort and trust of their patients. In cases where a patient shows discomfort or dissatisfaction, it is important that the hygienist guarantees open communication to the patient in order to gain their trust. Failing to do so may result in difficulties when trying to build a strong client base.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.375-380
• /
• 2003

In this study. we have intended to control the properties of surface reaction zone generated between pure titanium and oxide investment moulds. Commercially pure titanium was centrifugally casted and silica$.$alumina based phosphate bonded investment was used as the mould material. The effect of cooling methods after casting on the surface reaction zone and mechanical properties of casts were investigated. The resulting casts showed the multilayered surface reaction zone regardless of cooling method. Especially. water cooling method produced the titanium casts with thinner surface reaction zone. weaker strength. and higher elongation properties compared to air cooling. It can thus be known that the resulting casts had satisfactory mechanical properties as dental materials. From these results, the cooling rate dependence of interfacial and mechanical properties can be attributed to the diffusion of oxygen from casting environment, which control the reaction of titanium and mould.

• Journal of Embryo Transfer
• /
• v.25 no.4
• /
• pp.259-262
• /
• 2010

Optimization of the preimplantation mammalian embryo culture condition was widely focused on refining medium composition under the name of chemically defined media. However, recent research revealed that the alteration of physical environment can be a crucial factor to a successful embryo development. In this study, under the same embryo density, a novel culture device named oil-free micro tube culture (MTC) system was evaluated using porcine parthenogenetic embryos. The activated oocytes were placed into the 0.2 ml thin-wall flat cap PCR tube and cultured to the blastocyst stage. As a preliminary step, embryo density and culture medium volume were optimized under a standard drop culture system. The optimal embryo density range for in vitro culture was 0.5 embryos per ${\mu}l$ in $20\;{\mu}l$ drop (20.5%) and 1.0 embryos per ${\mu}l$ in $10\;{\mu}l$ drop (20.6%). Based on these results, we compared drop culture system and 'MTC' system in terms of the developmental rate to the blastocyst stage. In $20\;{\mu}l$ medium volume, the 'MTC' system showed similar blastocyst formation rate when compared with drop culture system (20.2% versus 20.5%, respectively) while the 'MTC' system showed lower blastocyst formation rate than drop culture system in $10\;{\mu}l$ one (12.7% versus 20.0%, respectively). Therefore the $20\;{\mu}l$ MTC system may be an alternative incubation system for short-distance embryo transport without carrying the $CO_2$ incubator and this provides novel embryo culture device to clinical veterinary embryologists.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.881-885
• /
• 2003

Wear and friction properties of the alumina-glass dental ceramics were evaluated in exact in vitro environment (artificial saliva at 37$^{\circ}C$), using a ball-on-disc apparatus, at contact loads from 49 N to 196 N and with the disc rotating at 120 rpm up to 10$^{6}$ cycles to investigate the wear behavior. As the load increased from 49 N to 196 N, the friction coefficient of 0.025 was maintained, however, the volumetric wear rate rose from 2.18 ${\times}$10$^{-9}$TEX>$mm^{3}$/Nㆍm to 2.35 ${\times}$10$^{-6}$TEX>$mm^{3}$/Nㆍm. Experimental results indicated that the wear behavior of the alumina-glass composites with a sliding distance of 4.4 km was a typical adhesive wear, which was applicable for orthodontia ceramic brackets.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.104-112
• /
• 2015

Objectives: This study was performed to investigate the effects of different intracanal medicaments on chemical structure and microhardness of dentin. Materials and Methods: Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCl), stored in humid environment for four weeks and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1 mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [$Ca(OH)_2$] and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n = 10 per group) and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher's least significant difference were used for statistical analyses. Results: Dentin discs treated with different intracanal medicaments and those treated with NaOCl + EDTA showed significant reduction in microhardness (p < 0.0001) and phosphate/amide I ratio (p < 0.05) compared to no treatment control dentin. Furthermore, dentin discs treated with TAP had significantly lower microhardness (p < 0.0001) and phosphate/amide I ratio (p < 0.0001) compared to all other groups. Conclusions: The use of DTAP or $Ca(OH)_2$ medicaments during endodontic regeneration may cause significantly less microhardness reduction and superficial demineralization of dentin compared to the use of TAP.

• Journal of Nutrition and Health
• /
• v.50 no.3
• /
• pp.203-216
• /
• 2017

Purpose: This literature review was performed to assess the effect of raisins on human health. Methods: A review of Medline was conducted using the keywords: 'raisins, raisins and health, raisins and cardiovascular disease (CVD), raisins and cancer, raisins and diabetes, raisins and fiber, raisins and colon health, raisins and antioxidants, raisins and inflammation, raisins and dental caries'. The reference lists from previous review articles on raisins and human health and the California Raisin Marketing Board files were reviewed for additional studies. Results: Raisins have one of the highest polyphenolic content and antioxidant ORAC levels compared to other traditional dried fruits. Many of the polyphenols in raisins are well assimilated and bioavailable. Raisin consumption reduces low density lipoprotein (LDL) cholesterol, blood pressure and blood sugar, when compared to equal caloric carbohydrate snacks and is associated with a reduced risk of CVD. The anti-inflammatory and cancer chemopreventive effects of raisins are mixed. Raisin consumption reduces intestinal transit time and positively affects gut microbiota. Raisins produce sustained energy during long term athletic competitions equal to traditional sports energy gels, shots and jelly beans. Raisins produce a non-cariogenic oral environment and do not fit the American Academy of Pediatrics criteria to be considered a choking hazard. Conclusions: Based on the review of literature, consumption of raisins provide numerous health benefits for promoting general wellness and in the prevention of many chronic diseases including: CVD, type 2 diabetes mellitus (T2DM) gastrointestinal diseases, and dental caries.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.1
• /
• pp.34-42
• /
• 2019

Objectives: Various bone graft substitute materials are used to enhance bone regeneration in the maxillofacial skeleton. In the recent past, synthetic graft materials have been produced using various synthetic and natural calcium precursors. Very recently, eggshell-derived hydroxyapatite (EHA) has been evaluated as a synthetic bone graft substitute. To assess bone regeneration using EHA in cystic and/or apicectomy defects of the jaws through clinical and radiographic evaluations. Materials and Methods: A total of 20 patients were enrolled in the study protocol (CTRI/2014/12/005340) and were followed up at 4, 8, 12, and 24 weeks to assess the amount of osseous fill through digital radiographs/cone-beam computed tomography along with clinical parameters and complications. Wilcoxon matched pairs test, means, percentages and standard deviations were used for the statistical analysis. Results: The sizes of the lesions in the study ranged from 1 to 4 cm and involved one to four teeth. The study showed significant changes in the formation of bone, the merging of material and the surgical site margins from the first week to the first month in all patients (age range, 15-50 years) irrespective of the size of the lesions and the number of teeth involved. Bone formation was statistically significant from the fourth to the eighth week, and the trabecular pattern was observed by the end of 12 weeks with uneventful wound healing. Conclusion: EHA showed enhancement of bone regeneration, and healing was complete by the end of 12 weeks with a trabecular pattern in all patients irrespective of the size of the lesion involved. The study showed enhancement of bone regeneration in the early bone formative stage within 12 weeks after grafting. EHA is cost effective and production is environment friendly with no disease transfer risks. Thus, natural bioceramics will play an important role in the reduction of costs involved in grafting and reconstruction.

• The Korean Journal of Health Service Management
• /
• v.13 no.2
• /
• pp.135-142
• /
• 2019

Objectives: The objective of this study was to assess the antimicrobial effect of Platycodon grandiflorum extracts against oral microorganisms. Methods: The anti-microbial activity and minimal inhibitory concentration were measured the agar dilution method. Results: Platycodon grandiflorum extracts grew in the free agar plates all of the oral microorganisms. In the bark-free Platycodon grandiflorum extracts all the oral microorganisms grew in the free agar plates. Growth was inhibited at a concentration of 0.5 mg/ml. Oral microorganisms showed an absence of growth at a concentration of 1 mg/ml. Conclusions: It was confirmed that the extracts of Platycodon grandiflorum having a higher saponin content than the bark - free Platycodon grandiflorum extract showed excellent antimicrobial effect.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.257-263
• /
• 2021

This study analyzed the factors affecting online class satisfaction and tried to use it as basic data for more effective class management. The survey was collected on 208 students majoring in dental laboratory technology in Jeonbuk and Chungbuk. The data were analyzed by reliability analysis, descriptive stastistics, compare means(t-test, one-way ANOVA), Pearson's correlation coefficient and stepwies multiple regression analysis(SPSS program). The analysis results showed that expected benefit of time was 3.87, expected benefit of learning was 3.30, technology familiarity was 3.40, and class satisfaction was 3.21. The most influential factor in class satisfaction was technology familiarity. In order to increase the online class satisfaction, it is necessary to build a learning environment to improve the ability to learning tools used in classes and technology familiarity with the online class system.