• 제목/요약/키워드: Dental characteristics

검색결과 2,143건 처리시간 0.031초

복합레진의 광중합 전·후와 shade guide의 색차 비교 (COLOR DIFFERENCES BETWEEN RESIN COMPOSITES BEFORE- AND AFTER-POLYMERIZATION, AND SHADE GUIDES)

  • 전이주;조성식;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제24권2호
    • /
    • pp.299-309
    • /
    • 1999
  • The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

  • PDF

CBCT 및 3D CT를 활용한 상악 유구치 치근과 근관 형태 (Root and Canal Morphology of Maxillary Primary Molar using CBCT and 3D CT)

  • 김준희;김현태;신터전;현홍근;김영재;김정욱;장기택;송지수
    • 대한소아치과학회지
    • /
    • 제48권4호
    • /
    • pp.437-448
    • /
    • 2021
  • 이 연구의 목적은 상악 유구치의 치근 및 근관의 형태학적 특성을 분석하는 것이다. 2006년 1월부터 2020년 4월까지 서울대학교 치과병원에서 CBCT 및 3D CT를 촬영한 3 - 7세 환자 총 268명(남자 175명, 여자 93명)이 연구에 포함되었으며, 치근 흡수와 치수병변이 없는 총 1002개의 상악 유구치의 치근과 근관 수를 분석하였다. 218개의 치아에 대해 치근과 근관의 형태, 이개각도, 치근과 근관의 길이 및 근관의 단면 형태를 분석하였다. 48개의 치아에 대해서는 Mimics 및 3-Matics software를 사용하여 치근 치수의 부피와 표면적, 치근-치수 비를 측정하였다. 절반 이상이 3개의 치근과 3개의 근관을 가지고 있었다. 좌우측 치아의 대칭성(Cohen's kappa coefficient)은 약 0.63이었다. 치근과 근관의 형태는 상악 제1유구치에서는 직선형이, 제2유구치에서는 곡선형이 많이 관찰되었다. 치근의 이개 정도, 치근과 근관의 길이는 상악 제1, 2유구치 모두 구개측 치근에서 가장 크게 나타났다. 근단부에서 근관의 단면 형태는 주로 ovoid 혹은 round형이었다. 치근 치수의 부피와 표면적, 치근-치수 비는 상악 제1,2유구치 모두 구개측 치근 치수에서 가장 크게 나타났다.

최근 11년간 서울대학교병원 교정과에 내원한 순구개열 환자의 내원 현황에 관한 연구(1988.3 - 1999.2) (The study on the cleft lip and/or palate patients who visited Dept. of Orthodontics, Seoul National University Dental Hospital during last 11 years (1988.3-1999.2))

  • 양원식;백승학
    • 대한치과교정학회지
    • /
    • 제29권4호
    • /
    • pp.467-481
    • /
    • 1999
  • 순구개열은 악안면 선천성 기형 중에서 발생율이 가장 높으며, 여러 선학들의 조사연구에 의하면 순구개열의 발생빈도가 증가하는 것으로 알려져 있다. 따라서 순구개열 환자의 치료에서 중요한 부분을 담당하는 교정과의 순구개열환자의 내원동향에 관한 역학조사가 필요하다고 생각된다. 이에 저자들은 서울대학교병원 교정과에 내원한 순구개열 교정환자들의 연도별, 종류별, 성별, 연령별, Angle씨 부정교합군별 분포에 따른 역학적 특성과 국내병원에서의 수술시기 등의 치료현황에 대한 임상자료 등을 파악하고, 이를 순구개열 환자의 교정 진단 및 치료계획 수립에 중요한 기초자료로 사용하기 위하여 본 연구를 시행하였다. 1988년 3월 1일부터 1999년 2월 28일까지 서울대학교병원 교정과에 내원한 순구개열 환자(총 250명)와 그 부모들을 대상으로 한 초진시의 문진, 시진을 통하여 기록한 교정 chart및 cleft chart내용, X-tay film과 모형을 대상으로 조사를 시행하여 다음과 같은 결론을 얻었다. 1. 본 병원 교정과에 내원한 순구개열 환자의 수는 1988년부터 1990년까지 증가한 후 1992년까지 감소추세를 보였고, 1993년부터 1996년까지 비교적 일정한 추세를 보이다가 1997년 이후 현저한 증가 추세를 보였다. 2. 내원한 환자를 순구개열의 종류에 따라 조사한 결과 구순열:구순치조열:구개열:구순구개열이 7.6:19.2:9.6:63.6의 비율을 보였다. 편측 대 양측의 발생빈도는 구순열은 79:21, 구순치조열은 77:23,구순구개열은 75.5:24.5으로서 편측의 발생빈도가 양측에 비해서 높았다. 그리고 편측성에서 좌, 우측간의 발생빈도는 구순열이 53.3:46.7, 구순치조열이 59.5:40.5, 구순구개열이 59.2:40.8 으로서 좌측의 발생빈도가 우측에 비해서 높았다. 3. 순구개열의 남:여 발생빈도는 구순열은 57.9:42.1, 구순치조열은 68.8:31.2, 구순구개열은 76.1:23.9 로서 남자의 발생빈도가 여자에 비해서 높았다. 그러나 구개열에서는 41.7:58.3으로서 여자의 발생빈도가 남자에 비해서 높게 나타났다. 4. 내원 환자를 연령군 별로 조사한 결과 7-12세 군이 $52\%$로서 압도적으로 많았고, 0-6세 군 ($20.4\%$), 13-18세 군($17.2\%$), 18세 이상 군 ($10.4\%$)의 순이었다. 5. 구순열의 봉합수술시기로는 0-3개월 군이 $60.3\%$로서 가장 많았고, 4-6개월 군이 $17.9\%$로 두 번째였다. 6. 구개열의 봉합수술시기로는 1-2세군이 $31.7\%$로 가장 많았고, 0-1세군은 $25.6\%$, 2-3세군이 $12.1\%$였다. 구개 및 상악 성장이 어느 정도 이루어진 5세 이상 군은 $11.6\%$를 차지하였다.7. 구순 반흔 제거수술시기로는 4-6세군 ($27.5\%$), 6-8세군 ($19.6\%$), 2-4세군 ($13.7\%$)이 $60\%$이상을 차지하여 초등학교 취학 전에 구순의 반흔을 제거하려 함을 알 수 있었다. 8. 비변형 교정수술시기로는 0-2세군 ($7.1\%$), 2-4세군 ($14.3\%$), 4-6세군 ($21.4\%$), 6-8세군 ($14.3\%$)으로 초등학교 취학이전이 $57.1\%$로서 최근의 조기 치료경향을 반영하는 것으로 보인다. 9. 인두피판술은 평균 6세에 시행되었으며, 수술 시행 시기별의 차이를 보이지 않고 고른 분포를 보였다. 10. 내원한 환자를 순구개열 종류와 Angle씨 분류법에 의해 조사한 결과, 구순열군은 I급이 가장 많았고 III, II 급의 순이었으며, 구순치조열, 구개열, 구순구개열군은 III급이 가장 많았고, I, II 급의 순이었다. 그리고 III급의 발생빈도의 비율차이는 구순치조열은 $61.7\%$, 구개열은 $73.9\%$, 구순구개열군에서 $79.3\%$로서 구순구개열에서 압도적으로 III급의 발생빈도가 높게 나타났다. 11. 모든 연령군에서 III급 부정교합의 빈도가 가장 많아서($72.7\%$) 전치부의 반대교합이 주된 내원 동기가 됨을 간접적으로 알 수 있었다.

  • PDF