• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.331-342
• /
• 2016

Objective: To evaluate the accuracy and reliability of the diagnostic tools available for assessing maxillary transverse deficiencies. Methods: An electronic search of three databases was performed from their date of establishment to April 2015, with manual searching of reference lists of relevant articles. Articles were considered for inclusion if they reported the accuracy or reliability of a diagnostic method or evaluation technique for maxillary transverse dimensions in mixed or permanent dentitions. Risk of bias was assessed in the included articles, using the Quality Assessment of Diagnostic Accuracy Studies tool-2. Results: Nine articles were selected. The studies were heterogeneous, with moderate to low methodological quality, and all had a high risk of bias. Four suggested that the use of arch width prediction indices with dental cast measurements is unreliable for use in diagnosis. Frontal cephalograms derived from cone-beam computed tomography (CBCT) images were reportedly more reliable for assessing intermaxillary transverse discrepancies than posteroanterior cephalograms. Two studies proposed new three-dimensional transverse analyses with CBCT images that were reportedly reliable, but have not been validated for clinical sensitivity or specificity. No studies reported sensitivity, specificity, positive or negative predictive values or likelihood ratios, or ROC curves of the methods for the diagnosis of transverse deficiencies. Conclusions: Current evidence does not enable solid conclusions to be drawn, owing to a lack of reliable high quality diagnostic studies evaluating maxillary transverse deficiencies. CBCT images are reportedly more reliable for diagnosis, but further validation is required to confirm CBCT's accuracy and diagnostic superiority.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.14-24
• /
• 2022

The aim of the present study is to evaluate the validity of orthodontic measurements including tooth width, Bolton ratio, overjet and overbite on the digital dental models. Dental models of the subjects aged 12 to 18 were obtained in 3 different forms, which were conventional stone model, digital model created with Freedom HD model scanner, and digital model produced with CS3600 intraoral scanner. After measurements were made on the models, reliability and reproducibility of the measurements were evaluated by using intraclass correlation coefficient, while validity was assessed with paired t-test. As a result, significant reliability and reproducibility were verified, with intraclass correlation coefficient exceeding 0.750 in all groups. Measurements of the model scanned group showed an adequate validity in overall and anterior Bolton ratio, overjet, and overbite. Intraoral scanned models showed an adequate validity in anterior Bolton ratio, and overjet. Measurement on intraoral scanned digital models can be considered as an alternative for young children who have difficulty in taking impression. Furthermore, careful considerations on measurement error should be made in clinical situations.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.165-175
• /
• 2004

Information on the limits of treatment could allow for more rational treatment Planning and better results after treatment. From this point of view, this article has attempted to discuss the limits of orthodontic tooth movement. A relatively wider range of tooth movement is expected after Class III surgical-orthodontics than after conventional orthodontic treatment in general. The purposes of this Paper were: first, to evaluate the reliability of teeth position measuring gauge; and second, to elucidate the limits of orthodontic tooth movement. Dental casts of fifty-fine subjects were analyzed by using Set-up model checker (InVisitec Co., Korea) before and aster the Class III surgical-orthodontic treatment. The changes of maxillary and mandibular dental arch widths were also measured from the canines to the second molars. To test the inter-examiner reliability, randomly selected casts were measured by another examiner. Descriptive statistics and paired t tests were used to explain the tooth movement during treatment. The results showed a relatively good reliability of measuring instruments and a very diverse range of tooth movement. Collective changes by the orthodontic tooth movement evaluated in Class III surgical-orthodontics allowed for a suggestive interpretation of specific treatment patterns. Arch width changes during the inter-arch coordination were mainly the result of tipping in both buccal segments. Based on the results of this study, the possibility of a change in dentition as a result of orthodontic treatment should be understood in order to launch a well-organized plan of treatment.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.304-313
• /
• 2020

Objective: The aim of this study was to evaluate the stability of bimaxillary surgery involving bilateral intraoral vertical ramus osteotomy performed with or without presurgical miniscrew-assisted rapid palatal expansion (MARPE) in adult patients with skeletal Class III malocclusion. Methods: A total of 40 adult patients with skeletal Class III malocclusion were retrospectively divided into two groups (n = 20 each) according to the use of MARPE for the correction of transverse maxillomandibular discrepancy during presurgical orthodontic treatment. Serial lateral cephalograms and dental casts were analyzed until 6 months after surgery. Results: Before presurgical orthodontic treatment, there was no significant differences in terms of sex and age between groups. However, the difference of approximately 3.1 mm in the maxillomandibular intermolar width was statistically significant (p < 0.001). Two days after surgery, the mandible had moved backward and upward without any significant intergroup difference. Six months after surgery, the maxillary intercanine (2.7 ± 2.1 mm), interpremolar (3.6 ± 2.4 mm), and intermolar (2.0 ± 1.3 mm) arch widths were significantly increased (p < 0.001) relative to the values before presurgical orthodontic treatment in the MARPE group; these widths were maintained or decreased in the control group. However, there was no significant difference in surgical changes and the postsurgical stability between the two groups. No significant correlations existed between the amount of maxillary expansion and postsurgical mandibular movement. Conclusions: MARPE is useful for stable and nonsurgical expansion of the maxilla in adult patients with skeletal Class III malocclusion who are scheduled for bimaxillary surgery.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.236-244
• /
• 2015

Objective: The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods: The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results: Mean maxillary 1st molar distalization was $2.3{\pm}1.1mm$, at a rate of $0.4{\pm}0.2mm/month$, and rotation was not significant. Intermolar width increased by $2.9{\pm}1.8mm$. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions: Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.23-37
• /
• 1991

The understanding the natureof occlusal tooth contacts of natural dentition is important for correct diagnosis and treatment of diseases developed in stomatognatic system. Several investigator have studied the distribution of tooth contacts in maximum intercuspation and have reported contact locations with respect to the tooth position. Many methods have been clinically applied for the occlusal analysis in the intercuspal position. However, there are few quantative methods. This study analyzed the new software version of the T-Scan system to record and analyze occlusal contact balance in the anterior-posterior and right-left directions. Six time moment statistics and five moment statistics were calculated in the midsagittal and the incisal axes of the occlusal plane. In the present study, informed consent was obtained from 100 subjects with natural dentitions. The results were as follows ; 1. The mean of the dental arch length & width were 48.78, 65.32mm in whole population, 49.09mm, 65.50mm in males, 48.78mm, 64.63mm in females, respectively. 2. The mean of TLR & PLR were 0.193mm(left), 0.311mm(left), respectively. Therefore, the distribution of tooth contacts was bilaterally symmetric. 3. The mean of TFB & PFB were 29.168mm, 29.055mm, and that of LFB & RFB were 29.627mm, 29.587mm, respectively, and the qualitative center of occlusal contacts was the firtst molar. 4. The mean of LL & RL were 31.666mm, 31.377mm, respectively, and the quantitative center of occlusal force was the first molar. 5. The mean of LF & RF were 60.237N, 59.276N, respectively and Left-right moment was 72.491Nmm. Therfore, the distribution of occlusal force was bilaterally balanced.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.103-109
• /
• 2004

The present study prepared 72 test samples - 24 made of amalgam alloy, 24 of Verabond (Ni-Cr alloy) for crown and 24 of Talladium $^{TM}alloy$ for denture - according to the manufacturers' manuals and general method in consideration of the width of the mesial-distal dental crown of the lower $1^{st}$ molar and MOD cavity in clinics, put them in a 200 ml beaker containing 80 ml of artificial saliva, and measured their galvanic corrosion at distances of 0 mm, 7 mm and 40 mm after 7 days. Isolated metals in the electrolyte such as Cu, Ag, Ni, Cr, Sn, Zn and Hg were quantitatively analyzed with Inductively Coupled Plasma - Atomic Emission Spectrometer (ICP-AES, JY-50P, VG Elemental Co. France), and from the results were drawn conclusions as follows. First, Cu, Sn, Ag, Hg and Zn were highly advantageous when amalgam contacted gold alloy compared to Ni-Cr alloy for crown and Talladium alloy for denture. In addition, although gold alloy was finest in terms of oral tissue and biocompatibility, it was most disadvantageous when it was with amalgam. Second, when amalgam contacted gold alloy, heavy metals such as Ni and Cr were not isolated at all because gold alloy did not contain such elements but Sn was isolated as much as $227.1{\pm}18.0035{\mu}g/cm^2$ although it was not included in the composition either. Hg was also isolated. These elements are assumed to have been isolated from amalgam itself. Third, when amalgam alloy was apart from gold alloy 0 mm, 7 mm and 40 mm, Cu and Ag showed significance but Hg did not. This suggests that gold alloy must not be used together with amalgam, and must not be used between dissimilar prostheses regardless of distance. Fourth, when amalgam alloy contacted Ni-Cr alloy for crown, Ag was not isolated from the amalgam, but Zn, Ni, Sn, Hg and Cu were isolated in order of quantity. Significance was observed according to distance - 0 mm, 7 mm and 40 mm. Hg was not isolated but heavy metals Ni and Cr were isolated. If amalgam alloy was in the opposite arch or it was apart from Ni-Cr alloy for crown, the isolation Hg was less than that when amalgam alloy contacted Ni-Cr alloy for crown. Fifth, when amalgam alloy contacted Talladium alloy for denture, significance was observed at distances of 0mm, 7 mm and 40 mm. Hg was not isolated but heavy metals Ni and Cr were isolated. If amalgam alloy was in the opposite arch or it was apart from Talladium alloy for denture, the isolation Hg was less than that when amalgam alloy contacted Talladium alloy for denture. Sixth, according to the result of ICPES test on Cu, Sn, Ag, Hg, Zn, Ni and Cr of amalgam alloy, gold ally, Verabond and Talladium alloy when these alloys contacted artificial saliva, significance was observed in Cu and Hg. Seventh, when amalgam alloy contracted two non-precious metals Ni-Cr alloy for crown and Talladium alloy for denture in artificial saliva, significance was observed in the isolated by-products of Hg, Ni and Cr according to distance.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.531-537
• /
• 2009

Purpose: Alveolar bone grafting has become an essential process in the treatmemt of alveolar cleft patient for stabilization of the maxillary arch, elimination of oronasal fistula, the reconstruction of the soft tissue nasal base support, and creation of bony support for tooth eruption for implant. The use of Autologous iliac cancellous bone is preferable because of the adequate quantity and high osteoinductive potential. However, even with iliac bone, insufficient osteoregeneration and absorption occur due to several factors such as the patient's age, cleft width, functional stress, and others. In order to increase osteoregeneration where the iliac bone is placed, the present study is associated with bone marrow aspirate (BMA). The experimental study evaluated the efficacy of osteoregeneration in normal cleft rabbits when alveolar bone grafting was performed with autologous iliac corticocancellous bone. Methods: Twenty - four New Zealand White rabbits were divided randomly into 2 groups (BMA, control). All animals underwent harvesting of corticocancellous bone graft from the right posterior iliac crest via standard surgical technique. $1m{\ell}$ of BMA were obtained by scraping the needle and aspirate with $10m{\ell}$ syringe from the contralateral iliac bone wall. The muco - periosteal flap on the palate was elevated. A mixture of Equal bone's volumes with BMA and saline as its control was inserted into the cleft. Animals were sacrificed at 2, 4, and 8 weeks and maxilla was harvested for dental peri - apical X-ray, bone matrix density (BMD),and histologic analysis. Result: BMD of regenerated bone to the cleft in the rabbits was higher than that of the control rabbits. X-ray, histologic analysis showed that increased osteoregeneration and low absorption rate were observed in the BMA group. Conclusion: Our experimental study showed BMA enhanced the osteoregeneration and survival rate of alveolar bone grafting. BMA is easy to extract & cost - time effective. So it can be an effective enhancers for bone grafting mixtures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.369-381
• /
• 2019

The aim of this study was to analyze the changes and improvements in symptoms of sleep-disordered breathing (SDB) using semi-rapid maxillary expansion (SRME) in children with narrow maxilla and SDB symptoms. Subjects were 15 patients with sleep disorder (apnea-hypopnea index, AHI ≥ 1) and narrow maxillary arch between 7 and 9 years of age. Before the SRME was applied, all subjects underwent pediatric sleep questionnaires (PSQ), lateral cephalometry, and portable sleep monitoring before expansion (T0). All subjects were treated with SRME for 2 months, followed by maintenance for the next 3 months. All subjects had undergone PSQ, lateral cephalometry, and portable sleep monitoring after expansion (T1). Adenoidal-nasopharyngeal ratio (ANR), upper airway width and hyoid bone position were measured by lateral cephalometry. The data before and after SRME were statistically analyzed with frequency analysis and Wilcoxon signed rank test. As reported by PSQ, the total PSQ scale was declined significantly from 0.45 (T0) to 0.18 (T1) (p = 0.001). Particularly, snoring, breathing, and inattention hyperactivity were significantly improved (p = 0.001). ANR significantly decreased from 0.63 (T0) to 0.51 (T1) (p = 0.003). After maxillary expansion, only palatopharyngeal airway width was significantly increased (p = 0.035). There was no statistically significant difference in position of hyoid bone after expansion (p = 0.333). From analysis of portable sleep monitoring, changes in sleep characteristics showed a statistically significant decrease in AHI and ODI, and the lowest oxygen desaturation was significantly increased after SRME (p = 0.001, 0.004, 0.023). In conclusion, early diagnosis with questionnaires and portable sleep monitoring is important. Treatment using SRME will improve breathing of children with SDB.