• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.6
• /
• pp.865-871
• /
• 2006

Signs of dental discolouration, difficulty in mastication, bony exostosis and debility were observed in cattle from Qingtongxia Ningxia, China where fluoride concentration in drinking water, soil, fodder, serum, bone, teeth, haircoat and urine were significantly higher than the corresponding health site. The problem of fluorosis in beef cattle is attributable to water containing toxic levels of fluoride. The objective of this paper was therefore to evaluate the influence of fluoride on erythrocyte parameters in cattle under high fluoride and low selenium conditions, as well as the protective efficacy of selenium exposure in feedstuff for bovine endemic fluorosis. Sixteen 6 to 7 year-old high fluoride beef cattle were randomly allotted into two groups each with eight cows: high fluoride control group, and supplemented with 0.25 mg/kg selenium per day for 83 days respectively. In addition, eight 6 to 7 year-old normal control beef cattle were selected from a non-high fluoride site. Blood samples were collected on day 0, 30 and 83 for erythrocyte parameters analysis and scanning electronic microscopy. The results indicated that erythrocytes, hemoglobin, packed cell volume values and $Na^+-K^+$ ATPase activity from affected cattle on the high fluoride site were significantly reduced during the period as compared with the corresponding samples of normal control cattle, a great number of echinocytes were present in peripheral blood, and subsequent anaemia. However, affected cattle exposed to selenium revealed increasable erythrocyte parameters, the extent of elevation in these values being dependent on the duration of supplementation with selenium. These findings suggest that fluoride exposure can cause erythrocyte damage, whereas selenium supplementation can antagonize fluoride-induced generation of free radicals and cumulative effects of lipid peroxidation in erythrocytes. Selenium supplementation may help to alleviate the possible hazards associated with bovine endemic fluorosis.

• The korean journal of orthodontics
• /
• v.33 no.3 s.98
• /
• pp.141-150
• /
• 2003

The purposes of this study were to classify the anteroposterior and vertical skeletal pattern of normal occlusion samples into specific types with factor and hierarchical cluster analysis, and to evaluate the range and limit of skeletal relationships that permit the establishment of normal occlusion via natural dentoalveolar compensation. Lateral cephalograms of 294 normal occlusion samples were measured, as selected from 15,836 persons through a community dental health survey who cooperated in record taking. Using a factor analysis, two factors representing anteroposterior and vertical skeletal relationships were extracted from 18 skeletal measurements. Then cluster analysis classified the skeletal patterns into nine types. The means and the standard deviations of 8 anteroposterior skeletal measurements and 10 vertical skeletal measurements were determined and comparisons of these measurements among the types were performed. The results obtained in this study showed that the range of normal occlusion included very diverse anteroposterior and vertical skeletal relationships.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.236-244
• /
• 2015

Objective: The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods: The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results: Mean maxillary 1st molar distalization was $2.3{\pm}1.1mm$, at a rate of $0.4{\pm}0.2mm/month$, and rotation was not significant. Intermolar width increased by $2.9{\pm}1.8mm$. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions: Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.253-260
• /
• 2015

Objective: The aim of this study was to evaluate the facial dimensions of young adult women with a preferred facial appearance and compare the results with those from the general population. Methods: Twenty-five linear, nine angular, and three area measurements were made and four ratios were calculated using a sample of standardized frontal and lateral photographs of 46 young adult women with a preferred facial appearance (Miss Korea group) and 44 young adult women from the general population (control group). Differences between the two groups were analyzed using multivariate analysis of variance (MANOVA). Results: Compared with the control group, the Miss Korea group exhibited a significantly greater facial height, total facial height (TFH; trichion-menton), facial width (tragus right-tragus left), facial depth (tragus-true vertical line), and trichion-nasion/TFH ratio and smaller subnasale-menton/TFH and facial width/TFH ratios. Furthermore, the control group had smaller intercanthal and interpupillary widths. Conclusions: The Miss Korea group exhibited longer, wider, and deeper faces compared with those from the general population. Furthermore, the Miss Korea group had larger eyes, longer but less protruded noses, longer and more retruded lower lips and chins, larger lip vermilion areas, and smaller labiomental angles. These results suggest that the latest trends in facial esthetics should be considered during diagnosis and treatment planning for young women with dentofacial abnormalities.

• International Journal of Oral Biology
• /
• v.39 no.4
• /
• pp.193-199
• /
• 2014

Fluoride has been accepted as an important material for oral health and is widely used to prevent dental caries in dentistry. However, its safety is still questioned by some. Autophagy has been implicated in cancer cell survival and death, and may play an important role in oral cancer. This study was undertaken to examine whether sodium fluoride (NaF) modulates autophagy in SCC25 human tongue squamous cell carcinoma cells. NaF demonstrated anticancer activity via autophagic and apoptotic cell death. Autophagic vacuoles were detectable using observed to form by monodansylcadaverine (MDC) and acridine orange (AO). Analysis of NaF-treated SCC25 cells for the presence of biochemical markers revealed direct effects on the conversion of LC-3II, degradation of p62/SQSTM1, cleavage formation of ATG5 and Beclin-1, and caspase activation. NaF-induced cell death was suppressed by the autophagy inhibitor 3-methyladenine (3-MA). NaF-induced autophagy was confirmed as a pro-death signal in SCC25 cells. These results implicate NaF as a novel anticancer compound for oral cancer therapy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.2
• /
• pp.84-89
• /
• 2015

We report the eventually successful treatment of a huge bone defect and peri-implantitis following reconstruction of a previously failed intra-mobile cylinder implant system (IMZ) implant site using distraction osteogenesis (DO). In the anterior mandible, two IMZ implants failed and surgical debridement was performed in accordance to the patient's needs. Thereafter, mobility and suppuration were decreased and the patient visited the dental clinic on a regular basis for oral health maintenance. However, the inflammation did not resolve, and the bone destruction around the implants progressed for 4 years. Finally, the implants failed and a severe bone defect remained after implant removal. To reconstruct the bone defects, we attempted bone graft procedures. Titanium mesh was unsuccessfully used to obtain bone volume regeneration. However, DO subsequently was used to obtain sufficient bone volume for implant placement. The new implants were then installed, followed by prosthetic procedures. In conclusion, progression of peri-implantitis could not be arrested despite surgical intervention and repeated maintenance care for 3 years. Reconstruction of the peri-implantitis site was complicated due to its horizontal and vertical bone defects. Lesions caused by implant failure require an aggressive regenerative strategy, such as DO. DO was successful in reconstruction of a peri-implantitis site that was complicated due to horizontal and vertical bone defects.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.425-431
• /
• 2011

The industrial manufacturing of YSZ products can be summarized as a three step process: a) hydrolysis of zirconyl chloride and mixing of other solutions, b) precipitation, and c) calcination. The addition of ammonia or OH- is essential in the precipitation process. However, a strong agglomeration was observed in the results of an ammonia or OH- addition. Thus, it is necessary to disperse the powders smoothly in order to improve the mechanical strength of YSZ. In this study, YSZ was synthesized using the urea stabilizer and hydrothermal method. YSZ powders were synthesized using a hydrothermal method with Teflon Vessels at $180^{\circ}C$ for 24 h. The mole ratio of urea to Zr was 0, 0.5, 1, and 2. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens ($33\;mm{\times}8\;mm{\times}1{\pm}0.5\;mm$) for three-point bend tests were used in the mechanical properties evaluation. The crystalline of YSZ powders observed a tetragonal phase in the sample with a ratio of Zr:urea = 1:2 addition and a hydrothermal reaction time of 24 h. The average primary particle size of YSZ was measured to be 9 nm to 11 nm. The agglomerated particle size was measured from 15 nm to 30 nm. The three-point bending strength of the YSZ samples was 142.47 MPa, which is the highest value obtained for the Zr:urea = 1:2 ratio addition YSZ sample.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.199-209
• /
• 2020

This study was a descriptive study performed to identify factors affecting medical satisfaction in multicultural members. The survey participants were 301 multicultural members in A city. The data were analyzed using descriptive statistics and Independent t-tests, One-way ANOVA, and Stepwise multiple regression analysis with the SPSS 14.0 program. Stepwise multiple regression analysis revealed that the predictors of satisfaction among the medical staff were satisfaction with age and health insurance, which accounted for 28% of all variance. Predictors of satisfaction with the medical environment were age and jobs, which accounted for 17% of all variance. Predictors of satisfaction with medical expenses were multicultural form, educational level, and jobs, which accounted for 33% of all variance. These results suggest that we need to develop and implement strategies and programs that can enhance satisfaction with medical use among multicultural members.

• Journal of Sensor Science and Technology
• /
• v.18 no.4
• /
• pp.294-300
• /
• 2009

Cardiopulmonary resuscitation(CPR) is performed by artificial ventilation and thoracic compression for the patient under emergent situation to maintain at least the minimum level of respiration and blood circulation for life survival. Quality of the pre-hospital CPR not only significantly affects the patient's survival rate but also minimizes side effects caused by CPR. Good quality CPR requires monitoring respiration, however, traditional respiratory air flow transducers cannot be used because the transducer elements are located on the flow axis. The present study developed a new technique with no physical object on the flow stream but enabling the air flow measurement and easily incorporated with the CPR devices. A turbulence chamber was formed in the middle of the respiratory tube by locally enlarging the cross-sectional area where the flow related turbulence was generated inducing energy loss which was in turn converted into pressure difference. The turbulence chamber was simply an empty enlarged air space, thus no physical object was placed on the flow stream, but still the flow rate could be evaluated. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999 (P<0.0001) and the mean relative error<1 %. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• Pediatric Infection and Vaccine
• /
• v.25 no.2
• /
• pp.107-112
• /
• 2018

Staphylococcus aureus is now a major community-acquired pathogen worldwide, notably associated with skin and soft tissue infections. Staphylococci are present in the form of colonizers or environmental contaminants at home and increase the risk of recurrent infection. We are describing recurrent familial furunculosis caused by Panton-Valentine Leukocidin-positive methicillin susceptible S. aureus ST1 in Korea. An infant, his father and mother had furunculosis due to methicillin-sensitive S. aureus (MSSA) infection with identical susceptibility patterns. ST1 accounted for all 3 isolates and they were confirmed of having agr group I. Both sec and seh were detected in all isolates using polymerase chain reaction (PCR) assays, and all isolates contained Panton-Valentine leukocidin (PVL) genes. Risk factors for the household spread of S. aureus include skin conditions and close physical contact among household members. The relationship between S. aureus colonization of household contacts and the occurrence of S. aureus infection should be studied into more detail.