• 대한구강악안면임플란트학회지
• /
• 제18권2호
• /
• pp.120-138
• /
• 2014

Purpose: The purpose of this study was to review the outcomes of a series of studies on tissue regeneration conducted in multiple institutions including the Department of Periodontology, College of Dentistry, Yonsei University. Materials and Methods: Studies were performed divided into the following three subjects; 1) Development of three-dimensional nano-hydroxyapatite (n-HA) scaffold for facilitating drug release and cell adhesion. 2) Synergistic effects of bone marrow-derived mesenchymal stem cells (BMMSC) application simultaneously with platelet-rich plasma (PRP) on HA scaffolds. 3) The efficacy of silk scaffolds coated with n-HA. Also, all results were analyzed by subjects. Results: Hollow hydroxyapatite spherical granules were found to be a useful tool for the drug release and avidin-biotin binding system for cell attachment. Also, BMMSC simultaneously with PRP applied in an animal bone defect model was seen to be more synergistic than in the control group. But, the efficacy of periodontal ligament cells and dental pulp cells with silk scaffolds could not be confirmed in the initial phase of bone healing. Conclusion: The ideal combination of three elements of tissue engineering-scaffolds, cells and signaling molecules could be substantiated due to further investigations with the potentials and limitations of the suggested list of studies.

• Journal of Periodontal and Implant Science
• /
• 제42권3호
• /
• pp.95-104
• /
• 2012

Purpose: The purpose of this study was to determine whether increasing the Ti6Al4V surface oxide negative charge through heat ($600^{\circ}C$) or radiofrequency plasma glow discharge (RFGD) pretreatment, with or without a subsequent coating with fibronectin, stimulated osteoblast gene marker expression in the MC3T3 osteoprogenitor cell line. Methods: Quantitative real-time polymerase chain reaction was used to measure changes over time in the mRNA levels for osteoblast gene markers, including alkaline phosphatase, bone sialoprotein, collagen type I (${\alpha}1$), osteocalcin, osteopontin and parathyroid hormone-related peptide (PTH-rP), and the osteoblast precursor genes Runx2 and osterix. Results: Osteoprogenitors began to differentiate earlier on disks that were pretreated with heat or RFGD. The pretreatments increased gene marker expression in the absence of a fibronectin coating. However, pretreatments increased osteoblast gene expression for fibronectin-coated disks more than uncoated disks, suggesting a surface oxide-mediated specific enhancement of fibronectin's bioactivity. Heat pretreatment had greater effects on the mRNA expression of genes for PTH-rP, alkaline phosphatase and osteocalcin while RFGD pretreatment had greater effects on osteopontin and bone sialoprotein gene expression. Conclusions: The results suggest that heat and RFGD pretreatments of the Ti6Al4V surface oxide stimulated osteoblast differentiation through an enhancement of (a) coated fibronectin's bioactivity and (b) the bioactivities of other serum or matrix proteins. The quantitative differences in the effects of the two pretreatments on osteoblast gene marker expression may have arisen from the unique physico-chemical characteristics of each resultant oxide surface. Therefore, engineering the Ti6Al4V surface oxide to become more negatively charged can be used to accelerate osteoblast differentiation through fibronectin-dependent and independent mechanisms.

• 한국컴퓨터정보학회논문지
• /
• 제18권9호
• /
• pp.177-187
• /
• 2013

연관 규칙 탐사는 다양한 분야에서 널리 쓰이는 데이터 마이닝 기법으로 트랜잭션 데이터에 포함된 이산적인 항목들 간의 인과관계를 추출하는데 목적을 둔다. 하지만 분석자들은 때로 방대한 양의 데이터에서 추출된 많은 연관규칙들을 해석하고 활용하는데 곤란을 겪기도 한다. 이러한 문제점을 해결하기 위하여 본 논문에서는 주어진 트랜잭션 데이터에서 유용한연관 규칙을 탐색하기 위한 새로운 방법인 HTM 접근법을 제안하고자 한다. HTM 접근법은 크게 계층 군집, 테이블 뷰 및 모자이크 플롯의 세 가지 단계로 구성되며, 각 단계는 분석자들에게 적절한 시각적 표현을 제공한다. 예시를 위해 본 논문에서는 상기 접근법을 건강 검진 결과 데이터 분석에 적용하였으며, 실험결과 HTM 접근법을 통해 분석자들은 유용한 규칙들을 보다 효과적으로 탐색할 수 있을 것으로 기대된다.

• The Journal of Advanced Prosthodontics
• /
• 제10권1호
• /
• pp.8-17
• /
• 2018

PURPOSE. The study aimed to identify the accuracy and reproducibility of preparations made by gypsum materials of various colors using quantitative and semi-quantitative three-dimensional (3D) approach. MATERIALS AND METHODS. A titanium maxillary first molar preparation was created as reference dataset (REF). Silicone impressions were duplicated from REF and randomized into 6 groups (n=8). Gypsum preparations were formed and grouped according to the color of gypsum materials, and light-scanned to obtain prepared datasets (PRE). Then, in terms of accuracy, PRE were superimposed on REF using the best-fit-algorithm and PRE underwent intragroup pairwise best-fit alignment for assessing reproducibility. Root mean square deviation (RMSD) and degrees of similarity (DS) were computed and analyzed with SPSS 20.0 statistical software (${\alpha}=.05$). RESULTS. In terms of accuracy, PREs in 3D directions were increased in the 6 color groups (from 19.38 to $20.88{\mu}m$), of which the marginal and internal variations ranged $51.36-58.26{\mu}m$ and $18.33-20.04{\mu}m$, respectively. On the other hand, RMSD value and DS-scores did not show significant differences among groups. Regarding reproducibility, both RMSD and DS-scores showed statistically significant differences among groups, while RMSD values of the 6 color groups were less than $5{\mu}m$, of which blue color group was the smallest ($3.27{\pm}0.24{\mu}m$) and white color group was the largest ($4.24{\pm}0.36{\mu}m$). These results were consistent with the DS data. CONCLUSION. The 3D volume of the PREs was predisposed towards an increase during digitalization, which was unaffected by gypsum color. Furthermore, the reproducibility of digitalizing scanning differed negligibly among different gypsum colors, especially in comparison to clinically observed discrepancies.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.75-80
• /
• 2016

악골기형에 따른 외과적 치료방법은 상악골 또는 하악골을 직접 늘리거나 줄이는 방식을 이용한다. 골신장술(distraction osteogenesis)은 열성장한 악골에 치밀뼈절단술(corticotomy)을 시행한 후, 골신장기(jaw bone distractor)를 사용하여 간헐적인 힘을 골에 부과하며 골의 길이를 늘여주는 대표적인 방법이다. 그러나 이러한 골신장기는 피부를 관통한 채 골에 고정되기 때문에, 비심미적이며 감염이나 흉터 등의 많은 문제점이 발생한다. 이 연구에서는 구내형 골신장기(intraoral jaw bone distractor) 개발을 위해 유한요소분석을 시행하여 핵심구동부의 안정성을 시뮬레이션한 후, 골신장기를 제작하였다. 융합연구를 통하여 향후 무선형 골신장기를 제작하기 위한 기반 자료를 구축하였으며, 관련 자료는 골신장술의 근본적인 문제점을 해결할 수 있는 가능성을 제시하며, 제반 기술은 다양한 의료기기 개발 기술에 활용될 수 있다

• 대한치과교정학회지
• /
• 제31권5호
• /
• pp.499-504
• /
• 2001

하악골 횡적 성장결핍에 의한 하악 전치부의 총생을 치료하는데 성인의 경우 발치가 종종 요구된다. 그러나 발치에 의한 안모 변화가 바람직하지 않을 때 견인골 신장술을 시행하여 하악 정중부의 확장은 횡적 공간을 확보하여 빠른 교정치료 및 안정성을 확보할 수 있는 방법으로 고려된다. 하악 정중부 견인골 신장술을 시행한 후 tooth-borne type 과 tooth & bone-borne type distractor를 사용하여 latency, distraction, consolidation period를 거쳐 하악 정중부 횡적 확장을 시행하여 전치부 총생을 빠르게 치료할 수 있었으며, 두가지 방법에 의한 치유과정을 비교한 결과 치주적인 요소와 골 형성과정은 유사하였으며, 악관절 부위의 퇴행적 증상변화는 관찰되지 않았다.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.275-286
• /
• 2002

Statement of problem. Surface alteration of the implant screws after function may be associated with mechanical failure. Theses metal fatigue appears to be the most common cause of structural failure. Purpose. The purpose of this study was to evaluate surface alteration of the implant screws after function through the examination of used and unused implant screws in SEM(scanning electron microscope). Materials and methods. In this study, abutment screws(Steri-oss, 3i), gold retaining screw(3i) and titanium retaining screw(3i) were retrieved from patients. New, unused abutment and retaining screws were prepared for control group. Each of the old, used screws was retrieved with a screwdriver. And retrieved implant complex of Steri-oss system was prepared for this study. Then, SEM investigation and EDS analysis of abutment and retaining screws were performed. And SEM investigation of cross-sectioned sample of retrieved implant complex was performed. Results. In the case of new, unused implant screws, as maunfactured circumferential grooves are regularly examined and screw thread are sharply remained. Before ultrasonic cleansing of old, used implant screw, a lot of accumulation and corrosion products were existed. After ultrasonic cleansing of old, used implant screws, circumferential grooves as examined before function were randomly deepened and scratches increased. Also, dull screw thread was examined. More surface alterations after function were examined in titanium screw than gold screw. And more surface alteration was examined when retrieved with driver than retrieved without driver. Conclusions. These surface alteration after function may result in the screw instability. Regularly cleansing and exchange of screws was recommended. We recommend the use of gold screw rather than titanium screw, and careful manipulation of the driver.

• 대한치과보철학회지
• /
• 제40권4호
• /
• pp.344-351
• /
• 2002

The purpose of this study is to compare tensile bond strength between Cr-Co alloy and three denture base resins after surface treatment. Following the manufacturer's instructions, 180 bonded specimens were made from three denture base resins (Lucitone 199. Paladent 20. POSS resin) and three surface treatment methods (sandblasting. metal primer. silicoating) 20 samples were made in each group and a half was ther-mocycled 1000 times between $5^{\circ}C$ and $55^{\circ}C$. The tensile bond strength was measured using an Instron with 5mm/min crosshead speed. Data was analyzed with one-way ANOVA, T-test and Duncan test. The results were as follows : 1. Samples with metal primer coating had significantly high tensile bond strength than the other surface treated groups (p<.05). Significantly low tensile bond strength was shown in sand blasted groups (p<.05). 2. No significant difference was observed in metal primer coating groups before and after ther-mocycling (p>.05) 3. Tensile bond strength was decreased in silicoated samples after thermocycling (p<.05). 4. Of the surface treated groups with metal primer, Lucitone 199 had the greatest bond strength and POSS resin and Paladent 20 were followed (p<.05). 5. Of the surface treated groups with silicoating, POSS resin and Lucitone 199 had greater bond strength than Paladent 20 (p<.05).

• The Journal of Advanced Prosthodontics
• /
• 제8권3호
• /
• pp.172-180
• /
• 2016

PURPOSE. The purpose of this study was to analyze the antimicrobial, antioxidant activity and cytotoxicity of Dendropanax morbifera $L{\acute{e}}veille$ extract for assessing whether Dendropanax morbifera $L{\acute{e}}veille$ can be used for the development of natural mouthwash and denture cleaning solution. MATERIALS AND METHODS. The extract was obtained from branches of Dendropanax morbifera $L{\acute{e}}veille$. The solvent fractions were acquired by fractionating Dendropanax morbifera $L{\acute{e}}veille$ extract using n-hexane, ethyl acetate, chloroform and butanol solvent. Paper disc test was used to evaluate the antimicrobial and antifungal activity of Dendropanax morbifera $L{\acute{e}}veille$ extract and solvent fractions against Streptococcus mutans and Candida albicans. The analysis of antioxidant activity was carried out through DPPH radical scavenging assay. The cytotoxicity of Dendropanax morbifera $L{\acute{e}}veille$ extract was analyzed through MTT assay using normal human oral keratinocytes. RESULTS. Dendropanax morbifera $L{\acute{e}}veille$ extract showed antimicrobial activity against Streptococcus mutans and especially Candida albicans. The solvent fractions of Dendropanax morbifera $L{\acute{e}}veille$ showed strong antimicrobial activity against Streptococcus mutans and Candida albicans in n-hexane and butanol solvent fraction, respectively. Dendropanax morbifera $L{\acute{e}}veille$ extract also showed outstanding antioxidant activity. Butanol, ethyl acetate, and chloroform solvent fraction of Dendropanax morbifera $L{\acute{e}}veille$ tended to have increased antioxidant activity as the concentration increased. Dendropanax morbifera $L{\acute{e}}veille$ extract showed high cell survival rate in cytotoxicity test. CONCLUSION. Dendropanax morbifera $L{\acute{e}}veille$ extract turned out to have antimicrobial, antioxidant activity and cytophilicity. Based on these results, it is expected that Dendropanax morbifera $L{\acute{e}}veille$ is applicable as an ingredient for natural mouthwash and denture cleanser.

• Parasites, Hosts and Diseases
• /
• 제46권2호
• /
• pp.87-90
• /
• 2008

Gynaecotyla squatarolae (Digenea: Microphallidae) adult flukes were recovered from experimental chicks at day 4-6 post-infection and their tegumental ultrastructure was observed with a scanning electron microscopy. They were pyriform in shape, and their anterior halves were concaved ventrally. The whole body surface was covered with tegumental spines, which were wide and 16-17 digitated between oral and ventral suckers. The density of spines and number of digits decreased posteriorly. The oral sucker was subterminal and the excretory pore was at the posterior end of the worm. Two ventral suckers were similar in appearance and protruded near midline of the worm. The genital atrium was dextral to the small ventral sucker. The dorsal surface was covered with tegumental spines, but the spines were sparser than on the ventral surface. On the middle portion of the dorsal surface, a small opening presumed to be the Laurer's canal was seen. From these findings, it has been confirmed that the adult G. squatarolae has unique characteristics in the surface ultrastructure.