• 공업화학
• /
• 제17권4호
• /
• pp.403-408
• /
• 2006

가시광선 중합형의 고분자계 치아수복재의 고기능화를 위해 충전제로 사용된 친수성의 실리카 나노입자 표면을 $\gamma$-methacryloxypropyltrimethoxysilane ($\gamma$-MPS) 결합제로 소수성 처리하여 치아수복용 고분자 복합체를 제조하였다. 처리된 실리카의 구조적 물성과 복합체 내에서의 분산도 및 복합체의 중합 특성 등을 실리카의 소수화도와 비교하여 고찰하였다. 그 결과, 사용된 $\gamma$-MPS의 양이 40 wt%까지 증가함에 따라 실리카의 소수화도가 증가하였으며 그 이상에서는 큰 변화가 없었다. 또한 소수화도가 향상됨에 따라 복합체 내에서의 충전제 분산도가 양호하였으며 광중합 후 미반응 단량체는 핵자기공명 분석 결과 거의 남아 있지 않아 중합 특성이 우수함을 확인하였다.

• Imaging Science in Dentistry
• /
• 제39권2호
• /
• pp.61-68
• /
• 2009

Purpose : The purpose of this study was to develop the radiographic technique for detecting the demineralization which is known as indication of dental caries. Materials and Methods: This technique was based on the comparing of multiple radiographs which was irradiated by multiple X-ray spectra. For the meaningful comparing, the multiple radiographs were reconstructed to the dosimetrically consistent images using a standard material. The difference of resulting images of same target with multiple spectra represents the difference of response of material as regards the spectra. Results : We have found about 10% of demineralization of dental hard tissues particularly in the proximal region through the analyzing of differences. Conclusion: Most intriguing thing in this investigation was that the method to analyze difference shows us to an anatomic structure of dental hard tissues even if absolute values of optical density were excluded during the procedures. (Korean J Oral Maxillofac Radiol2009; 39: 61-8)

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.41-44
• /
• 2009

This paper describes an implementation of virtual teeth modeling for a haptic dental simulation. The system allows dental students to practice dental procedures with realistic tactual feelings. The system requires fast and stable haptic rendering and volume modeling techniques working on the virtual tooth. In our implementation, a volumetric implicit surface is used for intuitive shape modification without topological constraints and haptic rendering. The volumetric implicit surface is generated from input geometric model by using a closest point transformation algorithm. And for visual rendering, we apply an adaptive polygonization method to convert volumetric teeth model to geometric model. We improve our previous system using new octree design to save memory requirement while increase the performance and visual quality.

• 응용화학
• /
• 제9권2호
• /
• pp.25-28
• /
• 2005

To evaluate the dental restorative application of polymer composites filled with hydroxyapatite (HAP) which is an inorganic component of human bone material, dental properties of the polymer composites were investigated. A visible light system was utilized to activate the acrylate resin matrix of the composites. Maximum loading percentage of HAP in composite was 65 wt% and the depth of cure was 6.0 mm which can be applicable for dental restoration. With increasing the HAP content, degree of conversion of polymer composites was slightly decreased, however, polymerization shrinkage value was not varied. Diametral tensile strength value was enhanced with an increase of HAP content, however, there was no strict trend between flexural strength and HAP concentration. Anyhow, polymer composites prepared herein have superior mechanical properties sufficient specifications applicable to dental materials.

• 대한치과의사협회지
• /
• 제38권8호통권375호
• /
• pp.757-764
• /
• 2000

• 대한치과의사협회지
• /
• 제53권3호
• /
• pp.187-194
• /
• 2015

This paper reflects on the state of the art of two kinds of tooth hard tissue (enamel and dentin) bonding with resin cement. After presenting composition of resin cement, concepts of enamel bonding and resin bonding are addressed. Special attention is devoted to the concept and advantage of self-etching technique. Finally, recommended clinical performance regarding bonding to tooth with resin cement is summarized.

• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.61-70
• /
• 2003

The purpose of this study was to investigate the contact angles and wettability of conventional dental stones and improved dental stones and newly developed dental stones on several impression materials. Materials included in this study were several dental stones and newly developed dental stone ; 2 type III stones (Snow Rock, New Diastone), 6 type IV stones(Crystal Rock, Vel Mix, Fuji Rock, Tuff Rock, Resin Rock and newly developed dental stone) and 1 type V stone (Die Keen). Contact angles on the impression materials were measured with contact angle measuring device. Ten specimens for each material, total 180 specimens were made on void entrapment model. The two impression materials (Handae, GC) were used to produce 9 groups of die stone casts form void entrapment model. Voids in the stone casts were counted under a stereoscopic microscope. The grad for the reproduction ability of each materials on the void entrapment model was calculated from the casts by one examiner. From the experiment, the following results were obtained : 1. The newly developed stones showed smallest contact angle. Type III dental stone had larger contact angles than type IV and V stones. Contact angle was much affected by the impression materials. 2. Resin containing die materials such as Tuff Rock and Resin Rock had smallest void number than any other groups. 3. In comparing reproduction parameters, Tuff Rock and Resin Rock presented superior results, while Vel Mix showed lowest reproduction ability.

• 공업화학
• /
• 제16권3호
• /
• pp.422-426
• /
• 2005

가시광선에 의해 활성화되는 치아수복용 고분자 나노복합체를 제조하고 이들의 주요 물성을 고찰하였다. 복합체 제조에 사용한 충진재는 barium silicate와 나노 크기의 fumed silica가 혼합된 하이브리드 충진재를 사용하였으며 bisphenol A glycerolate methacrylate와 triethyleneglycol dimethacrylate로 구성되는 resin matrix와의 계면력 향상을 위해 실란 결합제로 표면을 소수성으로 처리하였다. 제조된 고분자 나노복합체의 기계적 물성을 평가한 결과, 나노 충진재가 첨가됨에 따라 내마모성이 향상되었다. 그러나 중합수축률 값은 나노 충진재 함량에 관계없이 3 vol% 이하로 거의 일정하였으며 광조사가 끝난 후에도 중합수축은 지속적으로 일어남을 알 수 있었다. 또한 복합체의 색차는 나노 충진재 함량이 늘어남에 따라 근소한 차이로 증가되었다.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.169-176
• /
• 2017

Dental implants are required to have biomechanical functions and biostability in order to perform authoring, pronunciation, and aesthetic functions in the oral cavity. In terms of biostability, pure titanium for medical have good biostability and no rejection in the alveolar bone. with appropriate strength in terms of strength as well as biocompatibility. In recent years, various surgical methods and devices have been developed to improve the convenience and safety of the procedure. However, as the number of procedures increases, the screw loosening of the abutment screw connecting the artificial root and the abutment There are many reports of artificial root and abutment fracture. Fig. 1 is an example of a case where the upper part of the abutment screw is arbitrarily modified to remove the abutment by the abutment fracture due to the loosening of the abutment screw. The fundamental cause of abduction of the abutment screw is caused by the slight movement due to the lowering of the retention force of the abutment screw. It is necessary to minimize loosening of the abutment screw to avoid problems such as fracture during the period of using the implant. The purpose of this study is to investigate the structure of the abutment screw to prevent the loosening of the abutment screw by forming 0.5mm slot.

• 융합정보논문지
• /
• 제9권5호
• /
• pp.158-164
• /
• 2019

최근에는 환자의 귀에 거슬리는 소음을 발생시키는 치과 용 핸드 피스의 소음을 줄이기 위한 많은 연구가 주목 받고 있습니다. 일반적으로 배기 밸브, 기계 또는 자동차의 공기 펌프 내부에 흡음재를 추가하는 방법이 기계적 소음을 줄이는 최적의 방법으로 널리 보고됩니다. 본 논문에서는 EPP 기판의 미세 다공성 구조를 이용한 새로운 UV 레이저 가공 및 흡음 효율 향상을 위한 치과 용 핸드 피스의 제조 방법을 연구 하였다. 슬라이스 된 EPP 기판의 표면에 UV 레이저 가공으로 다수의 미세 크기 기공이 만들어졌다. 본 실험에서 다양한 휴대용 기계에 적용할 수 있는 우수한 잠재력을 가진 마이크로 다공성 EPP 기판은 치과 용 핸드 피스 내부의 마이크로 머플러의 흡음 구조에 적용되었고 핸드피스의 소음을 측정한 결과 적용전의 핸드피스에 비해 약 4dB의 흡음효과를 나타내었다.