• Journal of Surface Science and Engineering
• /
• v.49 no.6
• /
• pp.560-566
• /
• 2016

In this study, porcelain bonding strength and mechanical properties of sintered Ni-Cr-Ti alloy for dental prosthodontics have been researched experimentally. Mechanical and morphological characteristics of the alloys were examined by Vickers hardness test, tensile and bonding strength test, surface roughness test, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. In the sintered Ni-13Cr-xTi alloys, morphology of sintered alloy showed porous matrix diffused with alloying elements of Cr and Ti, and showed dendritic structure after melting process. From the XRD results, the second phases of NiCr, $Ni_3Cr$, and $Ni_3Ti$ were formed in the case of sintered and melted Ni-13Cr-xTi alloys. The tensile strength and hardness of Ni-13Cr-xTi alloys increased, as Ti content increased. Surface roughness increased, as Ti content increased. The bonding strength between metal and porcelain of Ni-13Cr-5Ti alloy was higher than those of Ni-13Cr and Ni-13Cr-10Ti alloys

• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.360-365
• /
• 2017

In this study, ion release and biocompatibility of sintered Ni-Cr-Ti alloy for dental prosthodontics have been researched by corrosion and cell culture test. The microstructures of the alloys were observed by optical microscope, and corrosion behavior was investigated using potentiostat (Model PARSTAT 2273, EG&G, USA). Cell culture was carried out using hGf cell in DMEM (Welgene Inc., South Korea) supplemented with 10% fetal bovine serum (FBS) (Welgene Inc., South Korea) and antibiotic antimycotic solution (Welgene Inc., South Korea). After corrosion and cell culture test, surface morphologies were observed by field-emission scanning electron microscopy. For wettability behaviors, contact angles were measured by wettability test. As the content of Ti increased, the number of pit decreased and the corrosion resistance was improved from anodic polarization test, also, polarization resistance of samples containing Ti remarkably improved as compared with the alloy not containing Ti. The sintered alloy showed a low contact angle due to the pores formed on the surface. The addition of Ti element showed that the cell survival rate was better than that of the control group.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.92-97
• /
• 2012

Risk management is the process that helps to identify hazards, analyze them, and then to create an action plan to avoid and mitigate these hazards. The main objective of risk management in product development and manufacturing is to provide safe and efficient products without spending too many resources. Medical device manufacturers also face enormous risks - regulatory, legal, and financial - based on their products and processes, and the concepts of risk management are particularly important because any single failure may result in serious damages to body or loss of life. In this regard, a set of guidelines for the application of risk management to medical devices has been issued by ISO and specified in the document ISO 14971 Medical devices - Application of risk management to medical devices. The main objective of this study is to investigate the application of risk management to dental implant development and manufacturing processes based on ISO 14971. A general risk management process is first introduced, and the application of ISO 14971 to dental implants is further investigated.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.87-103
• /
• 2009

The objective of the research which it sees life style of the individual and is the stroke engineering military merit satisfaction to examine the relationship. That Adler talked, it classified life style with the socially useful type, the ruling type, the getting type and the avoiding type. This governing form of the socially useful type sees, the ruling type grew the getting type and the avoiding type compared to military merit satisfactory boat song. Like this results military merit satisfactory degree of stroke engineering school lifestyle professionalism as dental technician company route period operates with the VIP who is important for is the thing. The research of the program development for the course map and the military merit duty selection map of restricted point and stroke engineering school lifestyle of the research which it sees discussed is necessary. The results are as following. 1. the types of Life-style ; the ruling type 31.3%, the getting type & the avoiding type 27.4%, the negative social type 26.6%, the socially useful type 14.8%. 2. the Major satisfaction ; the socially useful type 3.59, the ruling type 3.55, the negative social type 3.51, the getting type and the avoiding type 3.35. 3. the Campus life satisfaction ; the socially useful type 3.39, the ruling type 3.32, the negative social type 3.24, the getting type and the avoiding type 3.12.

• Journal of Technologic Dentistry
• /
• v.36 no.2
• /
• pp.75-81
• /
• 2014

Purpose: This study was to compare adaptations of lithium disilicate CAD/CAM crowns fabricated with different scanning systems. Methods: This study selected the mandibular right first molar as an abutment for experiments and produced 10 working models. Lithium disilicate crowns appropriate for each abutment were produced by using a CEREC$^{(R)}$ CAD/CAM system. The independent t-test was then used to compare and analyze the data obtained from the two groups(${\alpha}$=0.05). Results: Mean(SD) adaptation were $86.93(22.82){\mu}m$ for the InS group, $88.42(26.77){\mu}m$ for the ExS group. They were no statistically significant differences between groups for adaptation(p>0.05). Conclusion: Within the limitations of this study, the results suggest that the accuracy of all investigated optical scanner were satisfactory for clinical use. Further assessment and improvement of the lithium disilicate ceramic for the fabrication of FPDs is evidently still required.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.73-79
• /
• 2020

Purpose: The aim of this study was to investigate the influence of short and long duration sintering on microstructure and flexural strength of zirconia. Methods: To conduct three-point bending test, Zirconia specimens are milled according to ISO 6872 guidelines(N=18, n=9 per group). Two specimens group(n=8) is sintered for 10 hours(Standard schedule) and 3 hours(Speed schedule) at the peak temperature of 1550℃ with silicon carbide sintering furnace. Flexural strength of specimens are measured by instron. After coating each specimen(n=1), microstructure of specimens is observed using Scanning Electron Microscope(SEM). T-test was utilized to statistically assess the data. Results: The mean and standard deviation value of the flexural strength for standard schedule group are 578.15±57.48Mpa, that of speed schedule are 465.9±62.34Mpa. T-test showed significant differences in flexural strength between two zirconia specimen group which applied standard schedule and speed schedule respectively(p<0.05). Conclusion: The result of this study showed that the increase in sintering time led to increased grain size, and also to a positive effect on the flexural strength.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.260-264
• /
• 1999

The combined activities of dextranase and amylase(DXAMase) from Lipomyces starkeyi KSM 22 produced from starch fermentation inhibited or prevented dental plaque formation. The activities were stable in commercial mouthwash products; DXAMase activity retained over 93％ of original activity after 6 months at 23℃. We examined the effects of enzyme inhibitors and active ingredients in mouthwash on DXAMase activity. The DXAMase was stable with 0.29％(w/v) EDTA, 20％ (v/v) ethanol, 0.05％ (w/v) fluoride, and 0.05％ (w/v) SDS. Among the active ingredients of mouthwash, sodium benzoate (up to 1 ％, w/v) had no inhibitory effect on either dextranase or amylase activity. In the case of cetylpyridinium chloride, the addition of 0.05％ (w/v) inhibited 6％ of dextranase activity and 13％ of amylase activity. Propylene glycol (up to 1％, w/v) showed no inhibitory effect on either enzyme activity. DXAMase (5 IU/㎖) in mouthwash could remove pre-formed films of glucan-bound S. mutans cells. The addition of 0.1 IU/㎖ DXAMase in mouthwash prevented the formation of insoluble-glucan. These in vitro properties of L. starkeyi KSM 22 DXAMase are desirable for its application as a dental plaque control agent.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.33-40
• /
• 2012

Dentists are known to be highly exposed to the musculoskeletal disorders (MSD). The present study investigated the prevalence of MSD among Korean dentists and association between their MSD and physical workload. In addition, detailed causes related to the physical workloads were identified in dental operation, and needs for improvement of dental instrument and environment were collected from Korean dentists. The standardized Nordic questionnaire was used to survey body troubles and three types of questionnaires were made to investigate the physical workloads, causes of the physical workloads and improvement priority of dental equipments, respectively. A total of 104 Korean dentists were participated in the survey. Neck trouble (82%) was the most prevalent in Korean dentists, and shoulder (68%) and low back trouble (56%) followed, while low back trouble was reported to be most frequent in previous studies. The body troubles were related to the physical workload of the corresponding body parts, although they were not associated with personal characteristics. Most Korean dentists selected 'to keep direct view inside patient's mouth' and 'no support of the hand with dental instruments' as the causes of awkward and strenuous work postures. They wanted design improvement for some equipment in their operating room such as operating light and arrangement of workplace.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.1
• /
• pp.9-18
• /
• 2018

Objectives: Pleurotus eryngii is used both for edible and medicinal purposes, and has a physiological activity. The purpose of this study is to investigate the antibacterial effect of Pleurotus eryngii against six oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Methods: The antibacterial activities of various extracts of Pleurotus eryngii were examined by disc diffusion assay and minimum inhibitory concentration (MIC). The disc diffusion assay was performed by putting a paper disc soaked in extracts on plates inoculated bacterial cultures. The MIC of these extracts was determined by using a broth microdilution assay at a concentration ranging between 0.03 mg/ml to 15.00 mg/ml. The growth inhibition effect of extracts was measured at 600 nm for 24 hrs. Results: The antibacterial activity was confirmed against all six tested bacteria at Pleurotus eryngii ethyl acetate extract by the disc diffusion method. Acetone extract showed the antibacterial activity only against 4 strains containing Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, and Actinomyces viscosus. In ethanol extract, no activity was observed against other strains except Staphylococcus aureus. MIC values of ethyl acetate extract were the same, 7.50 mg/ml in all tested bacteria. Conclusions: Pleurotus eryngii exhibited the antibacterial activity against oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Thus, Pleurotus eryngii may be considered as a natural antibacterial agent for treatment of dental diseases.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.43-48
• /
• 2013

Purpose: This study aimed to investigate the shear bond strength for non-precious alloy castings without beryllium, which has been used repeatedly for economical reason. Methods: The Schmitz-Schulmeyer test method was used to evaluate the shear bond strength between the non-beryllium Ni-Cr alloy Vera Bond 2V(AlbaDent, Inc. USA) and the Ceramco 3(Dentstply, York, PA, USA) porcelain powder. The maximum loading and shear bond strength were measured. The average shear strength(MPa) was analyzed with the one-way ANOVA and the Tukey's test( =.05). The fracture specimens were examined using Microscope to determine the failure pattern. Results: The mean shear bond strengths(SD) in MPa were group A(100% new metal) control 28.72(3.31); group B(50% new + 50% reused) 27.28(1.13); group C(all reused) 26.61(5.47). Microscope examination showed that group A and B specimens presented mixed failure, and group C specimens showed adhesive failure. Conclusion: In conclusion, forward this non-precious alloy dose not contain beryllium for how should use a more systematic study and for future advanced research is performed giving effect to be considered desirable.