• Imaging Science in Dentistry
• /
• v.40 no.2
• /
• pp.93-97
• /
• 2010

This report was to show the radiographic appearances of the fungus ball in a paranasal sinus and to emphasize the scan area of cone beam computed tomography (CBCT) to detect the calcification in the paranasal sinus. A seventyfour-year-old woman visited our department for the implant rehabilitation at both maxillary posterior edentulous region. Pre-operative radiographic examinations including the panoramic, CBCT, and multidector CT images were taken. An opacification in the right maxillary sinus was observed on the multiplanar image of CBCT, however the pre-determined scan area of CBCT in this report hardly showed the calcifications at the central portion of the maxillary sinus. The opacification in the maxillary sinus could be misdiagnosed as chronic maxillary sinusitis if the calcification of fungus ball was not simultaneously detected. The scan area of pre-operative CBCT needs to be enough to scan the paranasal sinus from top to bottom.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.4
• /
• pp.391-396
• /
• 2006

The CT number is called Hounsfield unit(HU). Generally HU has a score between +1000 from -1000, and it is standardized usingthe air(-1000), water(0), and compact bone(+1000). Hounsfield Unit to standardize the density in computed tomography using the air and water has been used to analysis of lesion in other medical field. Computed tomography is popular method to analysis of lesion in oral & maxillofacial field but the analysis about density of lesion by Hounsfield unit is still obscure. For this study, computed tomography taken in Dankook University Dental Hospital and Hounsfield unit was measured to compare the difference of jaw bone lesion as cystic lesion, benign tumor, malignant tumor.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.109-120
• /
• 2010

The purpose of this study was first to analyze the utilization of dental examination through questionnaire to develop a diagnostic reference level of patient doses for dental radiography in korea. 77 dental institutions were classified into three groups: A group for the dental hospitals of the college of dentistry (11 institutions), B group for dental hospitals (30 institutions) and C group for dental clinics (36 institutions). The results were as follows : The mean numbers of unit chairs and medical staffs were 140.2, 15.3 and 5.8 sets, 112.6, 7.3 and 1.7 dentists, 3.1, 0.5 and no one radiologic technologists, and 19.7, 12.5 and 3.3 dental hygienists in A, B and C groups, respectively. The mean numbers of dental X-ray equipments were 14.64, 3.21 and 2.19 in A, B and C groups, respectively. Intraoral dental X-ray unit was used the most, the following equipments were panoramic, cephalometric, and cone-beam CT units. The most used X-ray imaging system was also digital system (above 50%) in all three groups. Insight dental film (Kodak, USA) having high sensitivity was routinely used for periapical radiography. The automatic processor was not used in many dental institutions, but the film-holding device was used in many dental institutions. The utilization rates of PACS in A, B and C groups were 90.9%, 83.3% and 16.7% respectively, and the PACS software program was used the most PiView STAR (Infinitt, Korea). The annual mean number of radiographic cases in one dental institution in 2008 for A group was 6.8 times and 21.2 times more than those for B and C groups, and periapical and panoramic radiographs were taken mostly. Tube voltage (kVp) and tube current (mA) for periapical radiography were similar in all three groups, but exposure time in C group was 12.0 times and 3.5 times longer than those in B and C groups. The amount of radiation exposure in C group, in which dental hygienists take dental radiographs, was more than those in other groups. The exposure parameters for panoramic radiography were similar in all three groups. In conclusion, the exposure parameters in dental radiography should be determined with reference level, not past experiences. Use of automatic processor and film-holding devices reduces the radiation exposure in film system. The quality assurance of dental equipments are necessary for the reduction of the patient dose and the improvement of X-ray image quality.

• International Journal of Oral Biology
• /
• v.34 no.1
• /
• pp.21-28
• /
• 2009

Mutations in DLX3 are associated with both autosomal dominant hypoplastic hypomaturation amelogenesis imperfecta (ADHHAI) and tricho-dento-osseous (TDO) syndrome. ADHHAI is caused by a c.561_562delCT (2bp-del DLX3) mutation whereas TDO syndrome is associated with a c.571_574delGGGG (4bp-del DLX3) mutation. However, although the causal relationships between DLX3 and an enamel phenotype have been established, the pathophysiological role of DLX3 mutations in enamel development has not yet been clarified. In our current study, we prepared expression vectors for wild type and deletion mutant DLX3 products (4bp-del DLX3, 2bp-del DLX3) and examined the effects of their overexpression on the expression of the enamel matrix proteins and proteases. Wild type DLX3 enhanced the expression of matrix metalloprotease 20 (MMP20) mRNA and protein in murine ameloblast-like cells. However, neither a 4bp-del nor 2bp-del DLX3 increased MMP20 expression. Wild type DLX3, but not the above DLX3 mutants, also increased the activity of reporters containing 1.5 kb or 0.5 kb of the MMP20 promoter. An examination of protein stability showed that the half-life of wild type DLX3 protein was less than 12 h whilst that of both deletion mutants was longer than 24 h. Endogenous Dlx3 was also found to be continuously expressed during ameloblast differentiation. Since inactivating mutations in the gene encoding MMP20 are associated with amelogenesis imperfecta, the inability of 4bp-del or 2bp-del DLX3 to induce MMP20 expression suggests a possible involvement of such mutations in the enamel phenotype associated with TDO syndrome or ADHHAI.

• Korean Journal of Microbiology
• /
• v.44 no.4
• /
• pp.289-292
• /
• 2008

Trisodium phosphate 12 hydrate and citric acid monohydrate mixture showed the strong anti-sticking effect on Streptococcus mutans, Streptococcus mitis, and Streptococcus salivarius, which are adhered to glass beads. Each Streptococcus species was shaking-cultured in brain heart infusion broth containing three glass beads. After 18 hr, glass beads were slightly washed into normal saline by three-pin-pointed pincette. Each three glass-beads set was put into reagent -containing tubes, which have 40 mg of bits of weighing paper for gaining brushing effect as similar as brushing one's teeth. The tubes were shaken by vortex mixer for 10 min except non-oral microbe, Streptococcus agalactiae (5 min). The samples were colony-counted by serial agar dilution method. Experiment was repeated three times for each Streptococcus species. The relative ratios of bacterial de-adherence by reagents were calculated in comparison with normal saline control. The de-adherence degree of citric acid-trisodium phosphate-saline mixture (CTS, pH 6.0) against Streptococcus mutans came to an average of 12.5 times compared with normal saline control. Trisodium-saline (TS, pH 8.4) showed the average of 7.5 times, and citric acid-saline (CS, pH 4.6) showed 6.0 times compared to the control group. The bacterial de-adherence degree against Streptococcus salivarius was each 7.2,2.6 and 2.8 times in above reagent sequence in comparison with saline control. CTS and TS showed 2.4 and 3.4 times of anti-sticking effect on Streptococcus mitis respectively, but CS had no anti-sticking effect on this bacterium. CTS, TS and CS showed 0.7, 0.6, and 0.6 times on non-oral microbe, Streptococcus agalactiae, separately compared with saline control. These results show that oral Streptococcus mutans, Streptococcus salivarius, and Streptococcus mitis, which are causative of dental caries or subacute endocarditis, may be easily removed from oral cavity by CTS mixture. It is conceivable that our experimental results will enable the development of a new conceptive toothpaste to prevent dental caries or subacute endocarditis after drawing teeth.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.299-306
• /
• 2017

In this case report, immediate loading of an implant-supported single-tooth prosthesis through complete digital workflow. A patient presented for restoration of missing a single tooth in the mandibular first molar. The digital impression was made with intraoral scanner and implant was placed using surgical guide pre-fabricated with pre-operative computed tomography (CT) and scan data. After 1 week later, prefabricated customized abutment and provisional restoration were connected for immediate loading. After 8 weeks later, abutment level impression was taken by intraoral scanner. At 3 months later from implant installation, monolithic zirconia crown were fabricated. This clinical report presents satisfying result in accuracy and patient satisfaction. A completely modeless digital procedure met expectations regarding precision, esthetics, and functionality.

• The korean journal of orthodontics
• /
• v.42 no.2
• /
• pp.56-63
• /
• 2012

Objective: To identify the right and left difference of the facial soft tissue landmarks three-dimensionally from the subjects of normal occlusion individuals. Materials and Methods: Cone-beam computed tomography (CT) scans were obtained in 48 normal occlusion adults (24 men, 24 women), and reconstructed into 3-dimensional (3D) models by using a 3D image soft ware. 3D position of 27 soft tissue landmarks, 9 midline and 9 pairs of bilateral landmarks, were identified in 3D coordination system, and their right and left differences were calculated and analyzed. Results: The right and left difference values derived from the study ranged from 0.6 to 4.6 mm indicating a high variability according to the landmarks. In general, the values showed a tendency to increase according to the lower and lateral positioning of the landmarks in the face. Overall differences were determined not only by transverse differences but also by sagittal and vertical differences, indicating that 3D evaluation would be essential in the facial soft tissue analysis. Conclusions: Means and standard deviations of the right and left difference of facial soft tissue landmarks derived from this study can be used as the diagnostic standard values for the evaluation of facial asymmetry.

• Journal of Periodontal and Implant Science
• /
• v.44 no.2
• /
• pp.94-99
• /
• 2014

Purpose: Various surgical techniques target achieving adequate keratinized tissue around dental implants; however, these techniques are usually performed before implant placement or upon the exposure of submerged implants. The aim of this case report is to describe a simultaneous placement of an interpositional free gingival graft (iFGG) with that of nonsubmerged implants in a patient lacking keratinized tissue and to assess the longterm outcome of this grafted gingiva. Methods: A wedge-shaped free gingnival graft (FGG), including an epithelium-connective tissue (E-C) portion and a connective-tissue-only (CT) portion, was harvested from the palate. The CT portion was inserted under the buccal flap, and the E-C portion was secured tightly around the implants and to the lingual flap. Results: At the 8-year follow-up, the gingival graft remained firmly attached and was well maintained, with no conspicuous shrinkage or reported discomfort during oral hygiene procedures. The use of an iFGG at a nonsubmerged implant placement minimizes the required number of surgical steps and patient discomfort while providing adequate buccal keratinized tissue. Conclusions: Therefore, the technique could be considered an alternative method in increasing the keratinized tissue for cases that have a minimal amount of keratinized tissue.

• Imaging Science in Dentistry
• /
• v.44 no.2
• /
• pp.121-128
• /
• 2014

Purpose: The present study was performed to compare the planning of implant placement based on panoramic radiography (PAN) and cone-beam computed tomography (CBCT) images, and to study the impact of the image dataset on the treatment planning. Materials and Methods: One hundred five partially edentulous patients (77 males, 28 females, mean age: 46 years, range: 26-67 years) seeking oral implant rehabilitation were referred for presurgical imaging. Imaging consisted of PAN and CBCT imaging. Four observers planned implant treatment based on the two-dimensional (2D) image data-sets and at least one month later on the three-dimensional (3D) image dataset. Apart from presurgical diagnostic and dimensional measurement tasks, the observers needed to indicate the surgical confidence levels and assess the image quality in relation to the presurgical needs. Results: All observers confirmed that both imaging modalities (PAN and CBCT) gave similar values when planning implant diameter. Also, the results showed no differences between both imaging modalities for the length of implants with an anterior location. However, significant differences were found in the length of implants with a posterior location. For implant dimensions, longer lengths of the implants were planned with PAN, as confirmed by two observers. CBCT provided images with improved scores for subjective image quality and surgical confidence levels. Conclusion: Within the limitations of this study, there was a trend toward PAN-based preoperative planning of implant placement leading towards the use of longer implants within the posterior jaw bone.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.339-344
• /
• 2008

When a delayed eruption of tooth is diagnosed, the causative factor should be detected before an establishment of treatment plan, if possible. Although a panoramic radiograph is enough to evaluate the position of tooth and the stage of tooth development, a 3-D Dental CT would be a powerful tool to reveal a spatial relationships between objects. The reported case showed a delayed eruption of lower left permanent canine and a mini-plate with screws adjacent to the impacted canine. Although the screws adjacent to the root of impacted tooth showed a close proximity, it was not presumed that these screws would interfere the eruption of the tooth. The impacted canine did not show any spontaneous eruption during observation. After the mini-plate and screws were removed, an orthodontic traction using elastic power chain was performed. The position of mini-plates and screws should be carefully designed to avoid damaging the tooth follicles or tooth roots in the jaw. Also the screws should be removed before an orthodontic traction to prevent damaging the root surface of impacted tooth.