• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2124-2135
• /
• 2006

In this paper, the reliability estimation of pipelines is performed by employing the probabilistic method, which accounts for the uncertainties in the load and resistance parameters of the limit state function. The FORM (first order reliability method) and the SORM (second order reliability method) are carried out to estimate the failure probability of pipeline utilizing the FAD (failure assessment diagram). And the reliability of pipeline is assessed by using this failure probability and analyzed in accordance with a target safety level. Furthermore, the MCS (Monte Carlo Simulation) is used to verify the results of the FORM and the SORM. It is noted that the failure probability increases with the increase of dent depth, gouge depth, operating pressure, outside radius, and the decrease of wall thickness. It is found that the FORM utilizing the FAD is a useful and is an efficient method to estimate the failure probability in the reliability assessment of a pipeline. Furthermore, the pipeline safety assessment technique with the deterministic procedure utilizing the FAD only is turned out more conservative than those obtained by using the probability theory together with the FAD. The probabilistic method such as the FORM, the SORM and the MCS can be used by most plant designers regarding the operating condition and design parameters.

• Journal of Energy Engineering
• /
• v.11 no.4
• /
• pp.342-349
• /
• 2002

This paper presents the determination of incentive level of Direct Load Control (DLC) program based on California Test. In the most of the Demand-Side Management (DSM) program, the variables art given by constant value during the DSM program's life time. But, in the case of DLC, variables are depen-dent on the executing number and time of the DLC per year. Therefore, we formulate a newly designed Cal-ifornia Test technique to overcome these problems and to apply effectively to the determination of incentive level of the DLC program. We perform case studies for various scenarios using a proposed formulation and review incentive level of the current DLC program. And we propose a plan to activate the DLC program in the competitive electricity market.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.151-154
• /
• 2002

In this paper, the effect of the crack growth length on the plastic zone size at the crack tip and the crack growth lives of the DENT specimen under constant amplitude cyclic loading were studied. The plastic zone size was calculated by nonlinear static method in commercial finite element analysis program, MSC/NASTRAN and the crack growth lives were also calculated by using compliance function considering geometric shape in MSC/FATIGUE. The calculated plastic zone size increased proportional to the crack length. And comparison of calculated plastic zone size and crack growth lives with the experimental results shows a good agreement.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.56-61
• /
• 2010

Recently, UV pulse laser is widely used in micro machining of the research, development and industry field of IT, NT and BT products because the laser short wavelength provides not only micro drilling, micro cutting and micro grooving which has a very fine line width, but also high absorption coefficient which allows a lot of type of materials to be machined more easily. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, the commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computitional simulation of the UV laser micro machining behavior for thin copper material in this paper. A finite element model considering high strain rate effect is especially suggested to investigate the micro phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. From these computational results, some of dynamic deformation behaviors such as dent deformation shapes, strains and stresses distributions were observed and compared with previous experimental works. These will help us to understand micro interaction between UV laser beam and material.

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.867-872
• /
• 2004

Oxidative stress due to reactive oxygen species (ROS) can cause oxidative damage to cells. Cells have a number of defense mechanisms to protect themselves from the toxicity of ROS. Mitochondria are especially important in the oxidative stress as ROS have been found to be constantly generated as an endogen threat. Mitochondrial defense depends mainly on super-oxide dismutase (SOD) and glutathione peroxidase (GPx), whereas microsomal defense depends on catalase (CAT), which is an enzyme abundant in microsomes. SOD removes superoxide anions by converting them to $H_2O$$_2$, which can be rapidly converted to water by CAT and GPx. Also, GPx converts hydroperoxide (ROOH) into oxidized-glutathione (GSSG). Ovariectomized (OVX) rats are used as an oxidative stress model. An ovariectomy increased the levels of MDA, one of the end-products in the lipid peroxidative process, and decreased levels of the antioxidative enzymes； SOD, CAT and GPx. However, Chondroitin sulfate (CS) decreased the levels of MDA, but increased the levels of SOD, CAT and GPx in a dose-depen-dent manner. Moreover, inflammation and cirrhosis of liver tissue in CS- treated rats were sig-nificantly decreased. These results suggest that CS might be a potential candidate as an anti oxidative reagent.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.48-55
• /
• 2004

Loads on offshore structures are largely transferred to the bracing members in the form of axial forces. The detrimental effects of imperfections on compressive strength are well recognized. Damage in the members of offshore structures would significantly affect the compressive behavior of the members. As a result, such damages may also affect the ability of the structure to withstand the functional and environmental loads. It is important to be able to assess the residual strength of damaged members quickly and accurately. This will help operators to make the decision whether the member has to be repaired or not. In this study, a series of calculation is performed to study the effects of different parameters on the behavior of such damaged members under axial load. And the results of analysis are compared with those of experiment.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.56-64
• /
• 2004

Several types of steel structures which are employed in offshore petroleum activities are constructed with tubular members. These structures are usually subjected to various types of loads such as normal functional loads and environmental loads. Furthermore, accidental loads may also act on the leg or bracing members due to supply boat collisions and objects droppings from platform decks. The extent of damage caused by these loads ranges from total collapse of the structure to small damage which may not have serious consequence at the time of accident. To make optimal design decisions regarding structural safety and economical efficiency, it is very important to be able to assess the influence of damages on the performance of damaged structural members. In the End report, a series of calculations is performed to study the effects of different parameters on the load carrying capacity of such damaged members under pure bending. And the results of analysis are compared with experiment results.

• Korean Business Review
• /
• v.4
• /
• pp.25-50
• /
• 1991

A management planning is an index to accomplish the goal of business enterprise and a managing guide of the top manager. It is a top manager's authority with he gives directions at the beginning of the budget year and has something to do with a responsible accounting. If we correlate this management planning with an area of accounting, we can subdivide it into followings; production and marketing schedule, demand-supply program of raw material, demand-supply program of the personnel and lobor cost program, facility investment program, balance fund program, profit and loss, and financial position program. I think, in the field of accounting for the sake of the management planning, there are motivation accounting, responsible accounting, divisional system accounting, evaluating accounting and so on. A management planning should be accomplishe and as it is accomplished, a business is going to be grown up and developed. Especially, it must be set up on the ground of the long-term strategies. When the accomplishment through the management planning, which is a social responibility that all the business enterprise are seeking after, is attained, it makes the development of business possible and we cannot dent that it is closely connected with the national economic development.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.31-38
• /
• 2000

Pressure vessels by composite materials were damaged sometimes during manufacturing or assembling. The state and the size of damage by low-velocity tests were investigated in this paper. Impactors of various masses and various tup shapes were dropped freely in the range of 120mm height to 700mm height. Compared with hemispherical tup of 12.7mm diameter, for hemispherical tup of 25.4mm diameter the size of surface dent was smaller but the size of delamination was bigger.

• Journal of Families and Better Life
• /
• v.11 no.1
• /
• pp.119-133
• /
• 1993

Based on the Double ABCX model of family stress and adaptation this study was to investi-gate the intercorrelations among and the relative magnitutide of variables associated with diffe-rent levels of adaptation to conflict with mothers-in-law reported by daughter-in-law. Frequency of conflict was selected as a stressor(aA) Resource factor(bB) in this study was self-efficacy. Four types of blame(self-behavior self-character other people and impersonal world blame) were selected as perception factors(cC). The adaptation factors(xX) were the level of daughter-in-law's psychological well-being and marital adjustment. Data for this research were questionnaire responses from 151 daughters-in-law who lived in Seoul. The results of correlational analyses indicated that most variables were significantly correlated with each other. In addition results of the path analysis on daughter-in-law's psychological well-being indicated that higher scores on the psychological well-being were significantly associa-ted with(a) greater self-behavior blame for the conflict and (b) less ascription of blame to the impersonal world. Frequency of conflict influenced psychological well-being indirectly th-rough self-behavior blame and impersonal blame both of which were also found to mediate the effect of self-efficacy on the level of psychological well-being. However although all indepen-dent variables were significantly correlated with marital adjustment no variables had direct effects on marital adjustment.