• 의료법학
• /
• 제17권1호
• /
• pp.281-297
• /
• 2016

임플란트 시술 부위의 정확하고 객관적인 골조직의 평가는 치료계획을 세우고 결과를 예측하는 과정에서 중요한 요소로 작용한다. 골조직 평가는 임플란트가 시술되는 치조골의 상부구조 제작 시기를 결정할 수 있는 가장 객관적 방법이다. 하지만 이러한 골조직 평가가 치과 임상의의 주관적인 견해에 의해서 기초가 수립되기 때문에 상당한 모순을 내포하고 있다. 치과임상들 역시 골조직에 대한 주관적인 평가의 문제점을 지적하고 있다. 따라서 정확하고 객관적인 기준을 마련하는 것이 요청된다. 과거 골밀도 평가는 임플란트 시술시 드릴링 작업과 같이 치고임상의의 주관적인 감각에 의존하였다. 그러나 이제는 컴퓨터 단층 촬영에서 나타난 각 픽셀에 대한 CT의 HU(Hounsfield unit)값을 이용하여 객관적이고 정확한 분류가 가능하게 되었다. Misch와 Kircos는 주관적인 골밀도 분류를 수치화하여 골조직을 D1부터 D5까지 다섯 단계로 나누었다. 하지만, 이 분류 방법도 정량화 된 테이터를 이용한 것이 아니라 감각에 의해 분류한 것을 단지 수치화한 것이다. 그러므로 더욱 객관적이고 정량화된 데이터의 비교 분석을 통해 임플란트 시술 부위의 골질을 평가할 필요가 있다. 임플란트시술은 치과의료분쟁에서 가장 높은 빈도를 차지하고 있다. 따라서 객관적인 검사와 합리적인 치료방법을 도입하여 임플란트 시술이 이루어진다면 의료분쟁에서 보다 합리적인 결과에 도달할 수 있을 것이며, 임플란트 시술의 실패율도 낮아 질 것이다. 따라서 본 연구의 궁극적인 목적은 객관적이고 정량화된 데이터를 기초로 한 법적으로 새로운 기준을 만들어서 환자뿐만 아니라 치과 임상의에게도 발생될 수 있는 의료분쟁을 최소화하고 하고자 하는 것이다.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.396-402
• /
• 2004

The purpose of this study was to investigate the difference of cotton fabric texture perceived between on-line(screening fabric) and off-line(real fabric), and to analyze fabric characteristics having an effect on the difference. The similarity of 55 various cotton fabrics perceived between on-line and on-line were measured showing simultaneously real fabrics and screening fabrics by 7-scale questionnaire. And the characteristics of cotton fabrics such as weave structure, thickness, weight, fabric density, stiffness, Hunter's L, a, b, and hue were measured. Cotton fabrics were classified into 3 groups by extent of similarity. There were no significant differences in weft density, stiffness, Hunter's L, a, b, and hue among 3 groups. But there were significant differences in weave structure, thickness, weight, warp density, and difference of warp ＆ weft density. The fabrics having large similarity were thick and heavy, had small warp density and difference of warp ＆ weft density, and distinct surface texture. The group having medium similarity included fabrics of medium thickness and weight, having weak surface texture, large warp density and difference of warp ＆ weft density. The group having small similarity, which the differences between on-line and off-line were large, included thin and light fabrics having smooth surface and large warp density and difference of warp ＆ weft density.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.79-83
• /
• 2008

In this paper, we introduced a LIF measurement method and summarized the theoretical side. When an altered wavelength of laser and electric power, lamp applied electric power, we measured the relative density of the metastable state in mercury after observing a laser induced fluorescence signal of 404.8nm and 546.2nm, and confirmed the horizontal distribution of plasma density in the discharge lamp. Due to this generation, the extinction of atoms in a metastable state occurred through collision, ionization, and excitation between plasma particles. The density and distribution of the metastable state depended on the energy and density of plasma particles, intensely. This highlights the importance of measuring density distribution in plasma electric discharge mechanism study. The results confirmed the resonance phenomenon regarding the energy level of atoms along a wavelength. change, and also confirmed that the largest fluorescent signal in 436nm, and that the density of atoms in 546.2nm ($6^3S_1{\to}6^3P_2$) were larger than 404.8nm ($6^3S_1{\to}6^3P_2$). According to the increase of lamp applied electric power, plasma density increased, too. When increased with laser electric power, the LIF signal reached a saturation state in more than 2.6mJ. When partial plasma density distribution along a horizontal axis was measured using the laser induced fluorescence method, the density decreased by recombination away from the center.

• 한국습지학회지
• /
• 제16권1호
• /
• pp.113-124
• /
• 2014

강우량은 관측소의 설치고도에 따라 관측량의 편차가 심하며, 이로 인해 도시지역과 산지지역의 강우발생 특성이 다르다. 산지효과로 인해 고도가 높아질수록 강우 관측시 불확실성이 커지는 것을 감안하면 산지지역에서의 강우관측소 밀도는 커야한다. 이러한 관측소의 고도특성이 반영된 관측망 평가는 산지효과를 반영하기 위한 것으로 산악지역에서 발생하는 돌발홍수의 효과적인 예측 및 레이더 자료의 보정에 있어 중요한 과정이 된다. 이에 본 연구에서는 강우관측소의 설치고 도를 고려한 강우관측망의 평가방법론을 제안하였다. 강우관측소의 고도별 설치밀도 파악을 위해 고정간격의 고도를 이용하는 등고도비별 설치밀도 산정방법과 유역의 면적비를 이용하는 등면적비별 설치밀도 산정방법을 적용하였다. 그 결과 등면적비를 이용하는 경우가 고도별 강우관측망의 평가에 보다 유리함을 확인하였다. 아울러 타유역과의 비교를 위해 등면적별 관측소 설치밀도의 변동계수를 이용하여 고도별 분포를 정량화 하였다. 이는 강우관측소의 설치고도분포의 균등함을 평가하는 정량적 지표가 되며, 제시된 방법론을 5대강 유역에 적용하였다. 그 결과, 설치밀도의 변동계수가 작은 유역에서는 고도별 강우설치밀도가 일정함으로 인해 보다 균등한 분포를, 반면 변동계수가 큰 유역에서는 상대적으로 고도별 설치밀도가 불균등함을 확인하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.97-99
• /
• 2003

Lineament density maps can be used for the quantitative evaluation of relationship between lineaments and groundwater occurrence. There are several kinds of lineament density maps including lineament length density, lineament cross-points density, and lineament counts density maps. This paper reports the usefulness of the representative elementary area (REA) concept for lineament analysis. This concept refers to the area size of the unit circle to calculate the lineament density factors distributed within the circle: length, counts and cross-points counts. The circle is a unit circle that calculates the sum of the lineament length, lineament counts and the number of cross-points within it. The REA is needed to obtain the best representative lineament density map prior to the analysis of relation between lineaments and groundwater well yield or other groundwater characteristics. A basic lineament map for the Yongsangang-Seomjingang watershed of Korea, drawn from aerial black-and-white photographs of 1/20, 000 scale was used for demonstrating the concept. From this study, the conclusions were as follows: (1) the REA concept can be efficiently applied to the lineament density analysis and mapping, (2) for whole Yongsangang-Seomjingang watershed which has 6, 502 lineaments with an average lineament length of 3.3 km, the lower limits of each REA used for drawing the three density maps were about 1.77 $\textrm{km}^2$ (r=750 m) for lineament length density, 7.07 $\textrm{km}^2$ (r=1, 500 m) for lineament counts density, and 4.91 $\textrm{km}^2$ (r=1, 250 m) for lineament cross-points density, respectively, (3) the lineament densities are inversely proportional to the size of REA, and the REA can be calculated with this inversely linear regression model, (4) if the average lineament density values for the whole study area are known, the most accurate density maps can be drawn using the REAs obtained from each linear regression model, and (5) but critical attention should be paid to draw lineament counts density and lineament cross-points density maps because.

• 한국방사선학회논문지
• /
• 제13권2호
• /
• pp.247-252
• /
• 2019

국내 남성에게서 지속적으로 발생하는 전립선암을 대상으로, 근접치료 시 금 나노입자 밀도에 따른 흡수선량을 평가하고자 하였다. 흡수선량 평가는 몬테카를로 시뮬레이션을 이용한 MCNPX 프로그램을 이용하였다. 선원은 일시적 삽입선원 $^{192}Ir$과 영구적 삽입선원 $^{103}Pd$을 이용하였으며, 금 나노입자의 밀도는 0 mg, 7 mg, 18 mg, 30 mg으로 하였다. 그 결과 표적장기인 전립선은 $^{192}Ir$이 2.95E-14 Gy/e에서 4.42E-14 Gy/e로 밀도에 비례해서 증가하였으며, $^{103}Pd$도 동일한 경향성을 보였다. 또한 주변장기에 대한 선량은 밀도에 반비례하여 감소하는 것으로 나타났다. 따라서 근접치료 시 나노입자의 사용은 치료가능비를 상승시킬 수 있을 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.115-124
• /
• 2002

The optimum design of auto-catalyst needs a good compromise between the pressure drop and flow distribution in the monolith. One of the effective methods to achieve this goal is to use the concept of radially variable cell density. However, there has been no study of evaluating the usefulness of this method on light-off catalyst. We have computationally investigated the effectiveness of variable cell density technique applied to the light-off catalyst using a three-dimensional integrated CFD model. in which transient chemical reacting calculations are involved. Computed results show that variable cell density technique can reduce the accumulated emissions of CO and HC during the early 100sec of FTP cycle by 86.78 and 80.87%, respectively, The effect of air-gap between the monoliths has been also examined. It is found that air-gap has a beneficial effect on reducing pressure drop and cold-start emissions.

• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.42-45
• /
• 2001

An ozone condensation system is evaluated from the viewpoint of an ozone supplier for Bi-superconductor thin film growth. An ozone condenser by a selective adsorption on the silica gel surface is constructed. Ozone density is evaluated by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is found to be available to the density evaluation from dilute to highly condensed ozone. The highest ozone density condensed by the adsorption method is evaluated to be 97 mol%.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2415-2421
• /
• 2020

The axial heterogeneous void distribution in a fuel channel is a relevant and important issue during nuclear reactor analysis for LWR, especially for boiling water channel-type reactors. Variation of the coolant density in fuel channel has an effect on the neutron spectrum that will in turn have an impact on the values of absolute reactivity, the void reactivity coefficient, and the fuel isotopic compositions during irradiation. This effect is referring to as the history effect in light water reactor calculations. As the void reactivity effect is positive in RBMK type reactors, the underestimation of water density heterogeneity in 3D reactor core numerical calculations could cause an uncertainty during assessment of safe operation of nuclear reactor. Thus, this issue is analysed with different cross-section libraries which were generated with WIMS8 code at different reference water densities. The libraries were applied in single fuel model of the nodal code of QUABOX-CUBBOX/HYCA. The thermohydraulic part of HYCA allowed to simulate axial water distribution along fuel assembly model and to estimate water density history effect for RBMK type fuel.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.196-201
• /
• 2006

Due to the damage which is caused by with the smoke, in the analysis statistics of a fire accident smoke is becoming the important evaluation index of fire quality. We must follow the procedures to use interior material for railway car as stated the Safety regulation for the urban railway car. In this study, we compared the Smoke Density of the train seat by test between Cone-Calorimeter and Smoke Density-Chamber. The results showed that the smoke density by test between Cone-Calorimeter and Smoke Density-Chamber is visible a similar tendency.