• Nuclear Engineering and Technology
• /
• v.43 no.4
• /
• pp.343-354
• /
• 2011

It is critically important to identify unexpected loose parts in a nuclear reactor pressure vessel, since they may collide with and cause damage to internal structures. Mass estimation can provide key information regarding the kind as well as the location of loose parts. This study proposes a mass estimation method based on an artificial neural network (ANN), which can overcome several unresolved issues involved in other conventional methods. In the ANN model, input parameters are the discrete cosine transform (DCT) coefficients of the auto-power spectrum density (APSD) of the measured impact acceleration signal. The performance of the proposed method is then evaluated through application to a large-sized plate and a 1/8-scaled mockup of a reactor pressure vessel. The results are compared with those obtained using a conventional method, the frequency ratio (FR) method. It is shown that the proposed method is capable of estimating the impact mass with 30% lower relative error than the FR method, thus improving the estimation performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.453-459
• /
• 2017

Users tend to check in and post their statuses in location-based social networks (LBSNs) to describe that their interests are related to a point-of-interest (POI). While previous studies on discovering area-of-interests (AOIs) were conducted mostly on the basis of density-based clustering methods with the collection of geo-tagged photos from LBSNs, we focus on estimating a POI boundary, which corresponds to only one cluster containing its POI center. Using geo-tagged tweets recorded from Twitter users, this paper introduces a density-based low-complexity two-phase method to estimate a POI boundary by finding a suitable radius reachable from the POI center. We estimate a boundary of the POI as the convex hull of selected geo-tags through our two-phase density-based estimation, where each phase proceeds with different sizes of radius increment. It is shown that our method outperforms the conventional density-based clustering method in terms of computational complexity.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.23-31
• /
• 2007

Although the relative density is an important factor showing mechanical properties of granular soils, the methods for its estimation have not been satisfactorily standardized. Many researchers have proposed various methods to determine max, and min, dry density, but the results, especially for max, dry density, show significant differences. In this study, a simple and practical method of evaluating the max, relative density was proposed, which could give reliable results in comparison with conventional methods. The experiment was carried out by varying the number of blows and the layers of the sample for each mold and the results were compared with those of Bowles method.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.3
• /
• pp.125-132
• /
• 2002

PMSMS (permanent magnet synchronous motors) are widely used in industrial applications and home appliances because of their high torque to inertia ratio, superior power density, and high efficiency. For high performance control, accurate informations about the rotor position is essential. Sensorless algorithms have lately been studied extensively due to the high cost of position sensors and their low reliability in harsh environments. A novel position sensorless speed control for PMSMs uses indirect flux estimation and is presented in this paper. Rotor position and angular velocity are estimated by the proposed indirect flux estimation. Linkage flux and magnetic field flux are calculated by the voltage equations and the measured phase current without any integration. Instead of linkage flux calculation with integral operation, indirect flux and differential magnetic field are used for the estimation of rotor position. A proper rejection technique fur current noise effect in the calculation of differential linkage flux is introduced. The proposed indirect flux detecting method is free from the integral rounding error and linkage flux drift problem, because differential linkage flux can be calculated without any integral operation. Furthermore, electrical parameters of the PMSM can be measured by the proposed TCM (time compression method) for soft starting and precise estimation of rotor position. The position estimator uses accurate electrical parameters that are obtained from the proposed TCM at starting strategy. In the operating region, a proper compensation method fur temperature effect can compensate fir the estimation error from the variation of electrical parameters. The proposed novel position sensorless speed control scheme is verified by the experimental results.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1342-1349
• /
• 2023

The planning accuracy of charged particle therapy (CPT) is subject to the accuracy of stopping power (SP) estimation. In this study, we propose a method of deriving a pseudo-triple-energy CT (pTECT) that can be achievable in the existing dual-energy CT (DECT) systems for better SP estimation. In order to remove the direct effect of errors in CT values, relative CT values according to three scanning voltage settings were used. CT values of each tissue substitute phantom were measured to show the non-linearity of the values thereby suggesting the absolute difference and ratio of CT values as parameters for SP estimation. Electron density, effective atomic number (EAN), mean excitation energy and SP were calculated based on these parameters. Two of conventional methods were implemented and compared to the proposed pTECT method in terms of residuals, absolute error and root-mean-square-error (RMSE). The proposed method outperformed the comparison methods in every evaluation metrics. Especially, the estimation error for EAN and mean excitation using pTECT were converging to zero. In this proof-of-concept study, we showed the feasibility of using three CT values for accurate SP estimation. Our suggested pTECT method indicates potential clinical utility of spectral CT imaging for CPT planning.

• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.137-149
• /
• 1997

In this paper we propose a logdensity estimation based on a Fourier expansion. The basis functions consisting of trigonometric functions are determinded by stepwise addition and deletion and the Bayes Information Criterion, where the maximum likelihood method is used to estimate the parameters. Numericla examples using real data and simulated data are provided to show the performance of proposed method.

• Communications for Statistical Applications and Methods
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2017

This manuscript summarized advances in bootstrap methods for long-range dependent time series data. The stationary linear long-memory process is briefly described, which is a target process for bootstrap methodologies on time-domain and frequency-domain in this review. We illustrate time-domain bootstrap under long-range dependence, moving or non-overlapping block bootstraps, and the autoregressive-sieve bootstrap. In particular, block bootstrap methodologies need an adjustment factor for the distribution estimation of the sample mean in contrast to applications to weak dependent time processes. However, the autoregressive-sieve bootstrap does not need any other modification for application to long-memory. The frequency domain bootstrap for Whittle estimation is provided using parametric spectral density estimates because there is no current nonparametric spectral density estimation method using a kernel function for the linear long-range dependent time process.

• Communications for Statistical Applications and Methods
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2003

In this article, we consider a Bayesian estimation method for the geometric mean of $textsc{k}$ exponential parameters, Using the Tibshirani's orthogonal parameterization, we suggest an invariant prior distribution of the $textsc{k}$ parameters. It is seen that the prior, probability matching prior, is better than the uniform prior in the sense of correct frequentist coverage probability of the posterior quantile. Then a weighted Monte Carlo method is developed to approximate the posterior distribution of the mean. The method is easily implemented and provides posterior mean and HPD(Highest Posterior Density) interval for the geometric mean. A simulation study is given to illustrates the efficiency of the method.

• YAKHAK HOEJI
• /
• v.4 no.1
• /
• pp.8-11
• /
• 1959

The method for the estimation of trace elements in hair is studied on this paper modifying the circular paper chromatography method shown by Giri and Balakrishnan for the estimation of vitamins from the multivitamin preparation. The elements studied are Ni, Al, Mn, Mg, Zn, Ca, Co, Cu, and Fe. The content of the element is estimated quantitatively by comparison the size and the color density of spots of the standard chromatogram prepared by the known amount of each standard substance and the chromatogram prepared from sample solution, after checking those chromatogram qualitatively. The comparative study has been made between the results from this method and the results from the other methods which are applying routinely at this laboratories. The experimental errors at each elements were within 10% limits. There was no interference between each elements. It is recommendable that this method can be applied to treat numerous speciemens saving times within experimental error of 10%.

• Communications for Statistical Applications and Methods
• /
• v.6 no.1
• /
• pp.43-52
• /
• 1999

The local influence method is adapted to quadratic discriminant analysis for the identification of influential observations affecting the estimation of probability density function probabilities and log odds. The method allows a simultaneous perturbation on all observations so that it can identify multiple influential observations. The proposed method is applied to a real data set and satisfactory result is obtained.