• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.44-46
• /
• 2002

This study was conducted to identify the proper analytical conditions regarding optical density for endotoxin analysis in the workplace using metalworking fludis. Our study found the "onset method" was more accurate than "time to Vmax" Reproducibility and accuracy analyzed by "onset method" was more greater than those by "time to Vmax""0.03"of optical density was the most appropriate analytical condition among onset method. Through this analytical condition, 0.998 of linearity was obtained and recovery rate ranged from 88％ to 105％ at endotoxin concentration below 5 EU/$m\ell$. No significant difference of endotoxins between "0.03"and "0.05" of optical density was observed from this study. Furthermore, correlation coefficients between them were statistically significant(p＜0.01). This study concluded that 0.03”or "0.05" of optical density is used to analyze endotoxin. Of these optical density value, value with higher linearity should be used to analyze endotoxin in environmental samples.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.198-203
• /
• 2003

Unsteady two-dimensional nonlinear waves which are generated by the numerical wavemaker of plunging type are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Marker-density function method is adopted for the simulation of wave breaking phenomena, and the computations are carried out with various wave amplitudes and two section shapes of wavemaker. The computation results are compared with other existing computational and experimental results, and the agreement between the experimental data and the computation results is good.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.195-199
• /
• 2005

Wave breaking phenomenon near the fore body of a ship is numerically simulated. The ship advance with uniform velocity in calm water. For the simulation, incompressible Navier-Stokes equations and continuity equation are adopted as governing equations. The simulation is carried out in staggered variable mesh system with finite difference method. Marker and Cell(MAC) method and Marker-Density method are employed to track the free surface. Body boundary conditions are satisfied with the adoption of porosity method and no-slip condition on the hull surface. The ship model has a wedge type fore-body, and the computational domain is an appropriate region around the fore-body. The computation results are compared with some experimental results. Also the difference of the free surface tracking methods are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.33.5-33
• /
• 2001

We consider here the problem of spectral estimation of multidimensional wide sense stationary (WSS) random process. A method, employing a special difference equation of correlation function, is proposed to solve the problem of multidimensional spectral estimation. In this approach, the special difference equation of correlation function is derived by modal decomposition method. Maximum likelihood estimator and Kalman filter are used to estimate the model parameters of the difference equation and the decomposed spectral residues. An algorithm is presented to estimate the multidimensional spectral density. According to the result of the simulation, these methods are feasible to estimate the spectral density of WSS process, which is realized by finite dimensional multivariable lineal system driven by white noise.

• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1745-1747
• /
• 2016

본 논문에서 다양한 블록 크기를 가지는 완전 차집합군을 이용하여 불규칙 준순환 패리티 체크 부호를 생성하는 방법을 제안한다. 제안하는 부호는 기존의 설계방법들에 비해 부호율, 부호 길이, 차수 분포 측면에서 다양한 값들을 가질 수 있다는 장점을 보인다. 또한 랜덤한 방법으로 설계하기 힘든 매우 짧은 길이의 부호를 체계적으로 설계할 수 있다. 모의실험을 통해 제안하는 부호의 오류 정정 성능을 검증한다.

• 한국전문물리치료학회지
• /
• 제8권1호
• /
• pp.51-58
• /
• 2001

In children with cerebral palsy, bone density is decreased by disturbance of bone remodelling due to lack of normal weight bearing and muscle contraction through physical activity. Loss of bone density cause fracture, delays treatment with immobilization, and leads to functional limitation. The purpose of this study was to investigate bone mineral density of lumbar spine in children with spastic quadriplegia and diplegia. Six spastic quadriplegia and 14 spastic diplegia were evaluated in this study. QDR 4500 X-ray densitometer was used to measure bone density at lumbar spine (L1~L4). Children with cerebral palsy showed lower bone density than that of normal children. Bone density in children with spastic quadriplegia and diplegia was $-1.812{\pm}.962$, $-1.519{\pm}.935$, respectively. However, there was no significant differences in bone density between children with spastic quadriplegia and diplegia. There was no significant difference in bone density relation to motor development level, height, and weight. Further study is needed to find the appropriate interventions for preventing loss of bone density in children with cerebral palsy.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.788-794
• /
• 1985

본 논문에서는 유동산란입자들을 1개에서 35개까지 불규칙 상태로 배열한 13 가지의 모델을 만들어 probe volume 속으로 횡단시키므로 나타나는 신호를 분석하여 수밀도와 가시도에 대한 실험적 관계를 파악하고 이를 이론식과 비교검토하고자 했다. 또한 두 입자의 간격을 좁혀가면서 실험하므로 간섭무늬에 대한 두 입자의 입상차가 합성신호특성에 중요 파라미터임을 확인했다.

• Journal of Korean Biological Nursing Science
• /
• 제10권2호
• /
• pp.105-112
• /
• 2008

Purpose: The purpose of this study was to investigate the difference in the incidence of diarrhea among the subjects given hypertonic and isotonic nutrients to the nasogastric tube feeding patients in the a critical care setting. Methods: This study is aquasi-experimental study with a pre & post-test design. The sample size of 40 was calculated based on Cohen's formula (1988). The total of 40 subjects who signed the informed consent were randomly selected and divided evenly into two groups, experimental and control group. Results: There are no significant differences between the two groups in homogeneity test (sex, age, albumin level, the use of antibiotics, antacid, and $H_2$ blocker). However, the frequencies of occurrence in diarrhea according to the density of nutrients formulation indicated a statistical difference at the level of .005 (p=.001): diarrhea occurred in four of 20 (20%) of the experiment group, but 14 (70%) of the control group. Also the onset date of diarrhea in the experiment group is later than that of the control group. Conclusion: The research findings suggest that we should begin with low density nutrients for nasogastric tube feeding, and increase its density gradually to decrease diarrhea incidence in the critical care setting.

• 한국산림과학회지
• /
• 제95권5호
• /
• pp.595-600
• /
• 2006

The plot design influences the budgets and the precision of forest inventory results. The objective of this study is to determine the efficiency of estimating forest variables such as tree density, basal area, volume, and species richness based on various plot sizes using fixed-area plot sampling in the natural deciduous forest of Pyeong-Chang County, Gang-won Province, Korea. In this study, 108 reference plots were established with a fixed plot size and shape of 0.09 ha ($30m{\times}30m$). In order to determine the optimal plot size for the interest of variables, each sample plot was established using different shapes (square, circle, and rectangle) and was divided into different plot sizes from 100 to $900m^2$. The mean relative difference (MRD) for the sum of the basal area and volume, and tree density per hectare decreased as plot size increased. But the MRD for three variables were only below 13% at the plot size of $500m^2$. Species richness for each reference stand observed ranging from 2 to 15 species, demonstrated highly positive significant relationships with plot size. The minimum plot size for the estimation of tree density, the sum of the BA and volume was determined to be about $400m^2$, whereas the estimation of species richness required a minimum plot size of $500m^2$.

• 대한디지털의료영상학회논문지
• /
• 제3권1호
• /
• pp.126-132
• /
• 1997

Purpose : To apply to Program of Auto processor quality control after comparison of Film density variations with amendments to Auto density by using Check density program and Adjust density program of calibration mode into the Laser imager. Methods : Observe Check and Adjust density variations on the Control chart with standard step and value during seven months from December, 1995 to June, 1956 extending twice a week. (1) Measure density value on the steps after printing out 17-step sensitometric pattern of the Check density program. (2) In the same way, measure density values after amending density by using Adjust density program If they are exceeding allowable error limit. Results : In case of Check density program, the exceeding limit rates of Density difference(DD) and Middle density(MD) are: FL-IM3543 DD=75%. MD=72.5%, FL-IMD DD=0%. MD=30.8%(14.5%) After amending density by using Adjust density program, the exceeding limit rates of all both Laser imager were zero percent. The standard deviations are show lower FL-IM D than FL-IM3543 on the Check density control chart, but higher on the Adjust density control chart. Conclusion : (1) Check density variations by printingout sensitometric pattern extending once a week at least for quality control of the Laser imager. (2) In case of a dusty place, check the Laser beam transmission after cleaning Laser optical unit extending once a month. (3) Be sure to measure and check density values by using adjust density program if they are exceeding allowable error limit. (4) Maintain much better film density by performing the adjust density program even if check density values are existed within normal limit.