• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.25-35
• /
• 2000

A simple two-terminal cyclic current0voltage(I-V) technique was used to measure the current-transients in metal-oxide-semiconductor capacitors. Distinct charging/discharging currents were measured and analyzed as a function of the hold time, the delay time, the gate polarity during the FNT electron injection, the injection fluence and the annealing time after the injection had stopped. The charge-exchange current was distinguished from total current-transients containing the displacement current components. Charging/discharging current caused by the charge exchange was strongly dependent not only on the density of positive charges in the $SiO_2$, but also on the density of interface traps generated during the FNT electron injection. Several tentative mechanisms were suggested.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.3 s.258
• /
• pp.209-216
• /
• 2007

Bacterial chemotaxis is essential to the study of structure and function of bacteria. Although many studies have accumulated the knowledge about chemotaxis in the past, the motion of a single bacterium has not been studied much yet. In this study, we have developed a device microfabricated by soft lithography and consisting of microfluidic channels. The microfluidic assay generates a concentration gradient of chemoattractant linearly in the main channel by only diffusion of the chemicals. Bacteria are injected into the main channel in a single row by hydrodynamic focusing technique. We measured the velocity of bacteria in response to a given concentration gradient of chemoattractant using the microfludic assay, optical systems with CCD camera and simple PTV (Particle Tracking Velocimetry) algorithm. The advantage of this assay and experiment is to measure the velocity of a single bacterium and to quantify the degree of chemotaxis by statistically analyzing the velocity at the same time. Specifically, we measured and analyzed the motility of Escherichia coli strain RP437 in response to various concentration gradients of L-aspartate statistically and quantitatively by using this microfluidic assay. We obtained the probability density of the velocity while RP437 cells are swimming and tumbling in the presence of the linear concentration gradient of L-aspartate, and quantified the degree of chemotaxis by analyzing the probability density.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.249-253
• /
• 2000

We have analyzed electrical characteristics of the amorphous $MgTiO_3$thin films deposited by pulsed laser deposition (PLD) technique with the temperature of 400~$500^{\circ}C$. The electrical characteristics of $MgTiO_3$films heavily depend on the deposition temperature. We speculate that the density of anomalous positive charge (APC) substantially increases as the deposition temperature lowers, causing the HF C-V curves shift to the direction of the negative gate voltage. We further observed that both the degree of C-V shift as a function of the deposition temperature and the density of APC were minimized by the use of $SiO_2$with thickness of approximately 100 $\AA$ between $MgTiO_3$films and the Si substrate.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.220-226
• /
• 2011

In the elastic wave equations, both horizontal and vertical displacements are defined. Since we can measure both the horizontal and vertical displacements in field acquisition, these displacements compose a displacement vector. In this study, we propose a frequency-domain elastic waveform inversion technique taking advantage of the magnitudes of displacement vectors to define objective function. When we apply this displacement-vector objective function to the frequency-domain waveform inversion, the inversion process naturally incorporates the back-propagation algorithm. Through the inversion examples with the Marmousi model and the SEG/EAGE salt model, we could note that the RMS error of the solution obtained by our algorithm decreased more stably than that of the conventional method. Particularly, the density of the Marmousi model and the low-velocity sub-salt zone of the SEG/EAGE salt model were successfully recovered. Since the gradient direction obtained from the proposed objective function is numerically unstable, we need additional study to stabilize the gradient direction. In order to perform the waveform inversion using the displacementvector objective function, it is necessary to acquire multi-component data. Hence, more rigorous study should be continued for the multi-component land acquisition or OBC (Ocean Bottom Cable) multi-component survey.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4E
• /
• pp.140-145
• /
• 2004

A laboratory study was carried out to investigate the change of ultrasonic velocity as a function of temperature for fluid mud (i.e., suspension). Pulse transmission technique with ultrasonic wave was used for ultrasonic velocity measurement. The five samples for fluid mud were prepared for concentration range of $30.6{\%}\;(1.24\;g/cm^{3}\;in\;density),\;23.3{\%}\;(1.19\;g/cm^{3}),\;11.5{\%}(1.10\;g/cm^{3}),\;7.8{\%}\;(1.08\;g/cm^{3}),\;and\;3.8{\%}\;(1.05\;g/cm^{3})$ by weight. The ultrasonic velocity in fluid mud was investigated to increase $(approximately\;2.83\;to\;4.95\;m/s/^{\circ}C)$ with increasing temperature, due to the effect of viscosity and compressibility of water with changing temperature. But the increasing rate tends to decrease at temperature higher than $30^{\circ}C,$ caused by the effect of viscosity. The concentration of fluid mud more affect to the ultrasonic velocity at higher temperature range than that at lower temperature. Overall the temperature effect on the ultrasonic velocity in fluid mud was a similar rate as for distilled water and seawater, suggesting fluid mud significantly depends on the behavior of water.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.35.1-35.1
• /
• 2013

By probing nuclear regions and overall properties of AGN hosts as a function of their environments, we aim to observationally examine how AGN activities are related to their surroundings. We have selected eight representative AGN hosts in the Virgo cluster, including seven cluster members (M49, M60, M84, M87, NGC 4435, NGC 4526, NGC 4636) and one galaxy that is likely to be background (NGC 4261) but still close enough to be studied in high resolution. The selected galaxies are located in a range of density regions showing various morphology in 1.4 GHz continuum. High resolution observations with the KVN allow us to access the inner region of the AGN without suffering from dust extinction and synchrotron self-absorption. Since half of our targets are weak to be detected at K-band within its coherence time, we applied phase referencing (fast antenna position switching) to calibrate fast atmospheric phase fluctuations. We successfully detected relatively bright AGNs, such as M87, M84 and NGC4261, but no detection signature was found to the other members of the sample. In this talk, we will present our first results from our KVN observations, while we will discuss in detail the applied technique and our immediate future plans.

• Journal of Energy Engineering
• /
• v.15 no.1 s.45
• /
• pp.60-66
• /
• 2006

An experimental investigation on the flow and convective heat transfer characteristics has been carried out far aluminum foam heat sink inserted into the annulus to examine the feasibility as a heat sink. Two aluminum foams or different permeability were selected to provide the friction factor and heat transfer correlations as function of Darcy, Reynolds and Prandtl number. Experimental results show that the friction factor is higher than clear annulus without aluminum foam, while $6\sim10$ times augmentation in Nusselt number is obtained. This technique can be used for the compactness of the heat exchanger.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1078-1083
• /
• 2002

Ceramics are significantly used in many industrial applications due to their excellent mechanical and thermal properties such as high temperature strength, low density, high hardness, low thermal expansion, and good corrosion resistive properties, while their disadvantages are brittleness, poor formability and high manufacturing cost. To combine advantages of ceramics with those of metals, they are often used together as one composite component, which necessiates reliable joining methods between metal and ceramic. Direct brazing using an active filler metal has been found to be a reliable and simple technique, producing strong and reliable joints. In this study, the fracture characteristics of Si$_3$N$_4$ ceramic joined to ANSI 304L stainless steel with a Ti-Ag-Cu filler and a Cu (0.25-0.3 mm) interlayer are investigated as a function of strain rate and temperature. In order to evaluate a local strain a couple of strain gages are pasted at the ceramic and metal sides near joint interface. As a result the 4-point bending strength and the deflection of interlayer increased at room temperature with increasing strain rate. However bending strength decreased with temperature while deflection of interlayer was almost same. The fracture shapes were classified into three groups ; cracks grow into the metal-brazing filler line, the ceramic-brazing filler line or the ceramic inside.

• Annals of Clinical Neurophysiology
• /
• v.10 no.1
• /
• pp.29-32
• /
• 2008

Although various criteria on the diagnosis of diabetic neuropathy are applied from trial to trial, being tailored in concert with its purpose, the utmost evidences of the diagnosis are subjective symptoms and objective signs of neurologic deficit. The application and interpretation of auxiliary electrophysiological test including nerve conduction study (NCS) should be made on the context of clinical pictures. The evaluation of the functions of small, thinly myelinated or unmyelinated nerve fibers has been increasingly stressed recently with the advent of newer techniques, e.g., measurement of intraepidermal fiber density, quantitative sensory testing, and autonomic function test. And the studies with those techniques have shed light to the nature of the evolution of diabetic neuropathy. The practical application of these techniques to the diagnosis of diabetic neuropathy in the individual patients, however, should be made cautiously due to several shortcomings: limited accessibility, wide overlapping zone between norm and abnormality with resultant unsatisfactory sensitivity and specificity, difficulty in performing subsequent tests, unproven quantitative correlation with clinical deficit, and invasiveness of some technique. NCS, as an extension of clinical examination, is still the most reliable electrophysiological test in evaluating neuropathy and gives the invaluable information about the nature of neuropathy, whereas the newer techniques need more refinement of the procedure and interpretation, and the accumulation of large scaled data of application to be considered as established diagnostic tools of peripheral neuropathy.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2118-2125
• /
• 2014

Gait Recognition is a new technique to identify the people by the way they walk. Human gait is a spatio-temporal phenomenon that typifies the motion characteristics of an individual. The proposed method makes a simple but efficient attempt to gait recognition. For each video file, spatial silhouettes of a walker are extracted by an improved background subtraction procedure using Gaussian Mixture Model (GMM). Here GMM is used as a parametric probability density function represented as a weighted sum of Gaussian component densities. Then, the relevant features are extracted from the silhouette tracked from the given video file using the Principal Component Analysis (PCA) method. The Fisher Linear Discriminant Analysis (FLDA) classifier is used in the classification of dimensional reduced image derived by the PCA method for gait recognition. Although gait images can be easily acquired, the gait recognition is affected by clothes, shoes, carrying status and specific physical condition of an individual. To overcome this problem, it is combined with footprint as a multimodal biometric system. The minutiae is extracted from the footprint and then fused with silhouette image using the Discrete Stationary Wavelet Transform (DSWT). The experimental result shows that the efficiency of proposed fusion algorithm works well and attains better result while comparing with other fusion schemes.