• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1992.10a
• /
• pp.2-29
• /
• 1992

According to the increase of occupation density of microwave frequency band on use microwave environments have been congested extensively. For shielding unnecessary electromagnetic wave of preventing the electromagnetic wave reflection a good conductor a low resistive material or a lossy material is mainly used. As a method to measure the absorbing characteristics of microwave absorber the fundamental microwave measuring method can be used. There is however a big problem in measuring errors since the wavelength of microwave is very short especially as in the case as microwave absorber for RADAR. Therefore this research aimed to a converting adaptor of 20mm${\Phi}$ coaxial tube from a Type-N connector to 20mm${\Phi}$ coaxial tube and to use it for designing microwave absorber and evaluating absorbing characteristics. Furthermore the measurements of absorbing characteristics and material constants have performed and reviewed which were carried out by using the coaxial tube in the short type and by using rectangular waveguide respectively As a result the validity of the measured values have been confirmed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.549-552
• /
• 2006

본 논문에서는 인체의 각 구성 요소별로 추적하여 사람의 동작을 추적하는 방법을 제안한다. 입력 영상에서 피부색 등의 색상정보를 이용하여 구성요소를 검출한다. 본 논문에서는 인체의 구성요소 중 동작 추적에 가장 필요한 5가지 구성요소를 검출하여 추적하였다. 이렇게 검출된 구성요소는 개별적으로 확률전파에 의해 추적되어지고, 각 구성요소의 추적결과는 융합을 통해 전체 인체의 동작을 추적할 수 있다. 제안하는 인체동작 추적 시스템은 유아의 동작교육에 이용되는 7가지 동작에 적용되었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.869-874
• /
• 2010

A research for the optimal design of microwave absorbing material featuring for the broadband has been conducted to apply to warship. A multilayered structure was suggested using wave absorbing layers and resistance layer to perform high performance in broadband frequencies. For the optimization of the wave absorbing characteristics, the thickness and permittivities of the absorbing layers as well as the surface resistance of the resistant layer were determined using genetic algorithm. The data base of permittivities related to the density of the dielectric materials and loss materials was obtained by the experiments for the dielectric constants of the absorbing layers, furthermore, the results were numerically expressed and used for the optimization.

• Journal of Information Technology Services
• /
• v.18 no.1
• /
• pp.141-151
• /
• 2019

To protect workers from industrial accidents, IoT hazard detection system using LoRa network was designed and fabricated. LoRa networks can operate with low power consumption, wide coverage, and low usage fees. The hazard detection system consists of a sensor unit, a transceiver module, a LoRa base station, ThingPlug, and a monitoring device. We have designed an optimal risk-determining algorithm that can send information quickly in a working environment. As measured by TTA, the implemented system has been found to be able to deliver the worker's location, ambient temperature, and carbon monoxide density to the administrator through the user interface. The implemented system showed a bit rate of 290bps and a maximum application range of 6 km.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.94-104
• /
• 2013

In solar system, Mars which has the most similar environment with the Earth has been steadily studied for the purpose of habitable environment for the future manned exploration and settlement. During the daytime, Martian ionosphere can be used for the ground-ground communications between lander and rover through the reflection of the radio wave from ionosphere. In addition, researches about Martian ionosphere provide the link of revolution of water and atmosphere. Martian ionospheric observations were performed by the occultation experiments onboard Mariner, Mars, Viking series during early Martian explorations as well as recent Mars Global Surveyor. Low frequency radar and plasma analyzer are on board Mars Express and Viking-1, 2 lander obtained the only vertical plasma density profile during their entry phase. In this paper, we studied the characteristics of scientific payloads observing Martian ionosphere and then analyzed the usability of ionospheric research according to the communication and climate on Mars.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.49-53
• /
• 2017

Metamaterials composed of split cut wire (SCW) on grounded polyimide film substrate have been investigated for the aim of electromagnetic wave absorbers operated in THz frequency band. Reflection loss and current density distributions are numerically simulated with variations of the SCW geometries using the commercial software. The minimum reflection loss lower than -20 dB has been identified at 5.5~6.5 THz. The simulated resonance frequency and reflection loss can be explained on the basis of the circuit theory of an inductance-capacitance (L-C) resonator. Dual-band absorption can be obtained by arrangement of two SCWs of different length on the top layer of the grounded substrate, which is due to multiple magnetic resonances by scaling of SCWs. With increasing the side spacing between SCWs, a more enhanced absorption peak is observed at the first resonance frequency that is shifted to a lower frequency.

• Journal of Astronomy and Space Sciences
• /
• v.7 no.2
• /
• pp.113-123
• /
• 1990

Two dimensional electrostatic model was used to investigate the interactions between beam electron and neutral plasma. It was found that results heavily depend on the beam density. When the beam electron density is lower than the ambient plasma beam density, many beam electrons exhibit vortex structure through beam-plasma interactions and can propagate into the ambient plasma easily from the injection area. On the other hand, when the beam density larget than that of the neutral ambient plasma, it was found that most of the beam electrons constitute return current and ion with much larger mass than that of the electron can be accelerated according to the magnetic field strength. Furthermore, as external field strength varies, it was found that propagation and interaction of the beam can show large dependence on it.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.172-180
• /
• 2007

A new diagnostics of plasma electron temperature and plasma density is introduced with the observation of the light emission along the tube of external electrode fluorescent lamps. With two different methods operating an external electrode fluorescent lamp of outer diameter 4.0 mm and length 860 mm for the back-light source of 37-inch LCD-TVs, the lighting modes and the plasma properties are investigated. In the center balance operation, the light-emission propagates simultaneously from both sides of the high voltage electrodes to the center of the lamp, while in conventional operation the light-emission propagates from the one end of a high voltage to the other ground electrode. In the operation value of luminance $10,000{\sim}15,000cd/m^2$, the electron plasma thermal energy $(kT_e)$ is about $1.3{\sim}2.7eV$ with the electron density $(n_e)$ is about $(1.6{\sim}3.6){\times}10^{16}m^{-3}$.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.101-104
• /
• 2000

In this paper, we analyze the propagation modeling methods to evaluate the IMT-2000 satellite RTT (Radio Transmission Technology). To generate Rayleigh random numbers having Jake's Doppler power density spectrum, the Rice's sum of sinusoids methods are used and their statistical characteristics are compared with each other.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.1
• /
• pp.9-19
• /
• 1990

Microwave absorbers for X-Band RADAR have been designed and fabricated trialy both in sheet and paint types, as a result of which the relative bandwidth of nearly 8% in both cases has been obtained under the tolerance limits of the reflection coefficients lower than -20dB. The matching thickness becomes 1.36 to 1.56mm which is significantly thinner than that of the conventional ones. Furthermore, it was shown that the microwave absorbing characteristics vary in accordance with the density and the mixing ratios of the materials constituting absorbs.