• 제목/요약/키워드: Dense sand

검색결과 142건 처리시간 0.023초

Experimental and numerical modeling of uplift behavior of rectangular plates in cohesionless soil

  • Niroumand, Hamed;Kassim, Khairul Anuar
    • Geomechanics and Engineering
    • /
    • 제6권4호
    • /
    • pp.341-358
    • /
    • 2014
  • Uplift response of rectangular anchor plates has been investigated in physical model tests and numerical simulation using Plaxis. The behavior of rectangular plates during uplift test was studied by experimental data and finite element analyses in cohesionless soil. Validation of the analysis model was also carried out with 200 mm and 300 mm diameter of rectangular plates in sand. Agreement between the uplift responses from the physical model tests and finite element modeling using PLAXIS 2D, based on 200 mm and 300 mm computed maximum displacements were excellent for rectangular anchor plates. Numerical analysis using rectangular anchor plates was conducted based on hardening soil model (HSM). The research has showed that the finite element results gives higher than the experimental findings in dense and loose packing of cohesionless soil.

The deformable multilaminate for predicting the Elasto-Plastic behavior of rocks

  • Haeri, Hadi;Sarfarazi, V.
    • Computers and Concrete
    • /
    • 제18권2호
    • /
    • pp.201-214
    • /
    • 2016
  • In this paper, a multilaminate based model have been developed and presented to predict the strain hardening behavior of rock. In this multilaminate model, the stress-strain behavior of a material is obtained by integrating the mechanical response of an infinite number of predefined oriented planes passing through a material point. Essential features such as the variable deformations hypothesis and multilaminate model are discussed. The methodology to be discussed here is modeling of strains on the 13 laminates passing through a point in each loading step. Upon the presented methodology, more attention has been given to hardening in non-linear behaviour of rock in going from the peak to residual strengths. The predictions of the derived stress-strain model are compared to experimental results for marble, sandstone and dense Cambria sand. The comparisons demonstrate the ability of this model to reproduce accurately the mechanical behavior of rocks.

Energy-based evaluation of liquefaction potential of uniform sands

  • Sonmezer, Yetis Bulent
    • Geomechanics and Engineering
    • /
    • 제17권2호
    • /
    • pp.145-156
    • /
    • 2019
  • Since behaviors of loose, dense, silty sands vary under seismic loading, understanding the liquefaction mechanism of sandy soils continues to be an important challenges of geotechnical earthquake engineering. In this study, 36 deformation controlled cyclic simple shear tests were performed and the liquefaction potential of the sands was investigated using three different relative densities (40, 55, 70%), four different effective stresses (25, 50, 100, 150 kPa) and three different shear strain amplitudes (2, 3.5, 5%) by using energy based approach. Experiments revealed the relationship between per unit volume dissipated energy with effective stress, relative density and shear strain. The dissipate energy per unit volume was much less affected by shear strain than effective stress and relative density. In other words, the dissipated energy is strongly dependent on relative density and effective stress. These results show that the dissipated energy per unit volume is very useful and may contain the non-uniform loading conditions of the earthquake spectrum. When multiple regression analysis is performed on experiment results, a relationship is proposed that gives liquefaction energy of sandy soils depending on relative density and effective stress parameters.

영구거푸집으로 사용한 유리섬유 FRP 판과 현장타설 고강도콘크리트로 이루어진 합성보의 휨/전단파괴거동에 관한 실험적 연구 (An Experimental Study for Flexure/Shear Failure Behavior of Composite Beam with GFRP Plank Used As a Permanent Formwork and Cast-in-place High Strength Concrete)

  • 유승운
    • 한국산학기술학회논문지
    • /
    • 제16권6호
    • /
    • pp.4245-4252
    • /
    • 2015
  • 유리섬유강화폴리머(GFRP) 판을 현장타설 고강도콘크리트 구조물의 영구거푸집으로 사용하기 위한 실험을 수행하였다. 현재 생산되는 GFRP 판의 경우 표면이 매끈하여 콘크리트와 일체 거동에 다소 문제점을 갖고 있다. 따라서 본 연구에서는 GFRP 판 하부의 잔골재 부착여부, GFRP판 웨브의 천공유무 및 간격, 상부 플랜지 폭을 실험 변수로 하여 현장타설 고강도콘크리트와 GFRP를 영구거푸집으로 활용한 전단경간비가 짧은 합성보의 휨/전단파괴거동을 분석하였다. GFRP 판 웨브를 천공하지 않은 경우 잔골재 부착효과 여부를 위한 실험 결과, 잔골재를 부착한 경우 미부착의 경우 보다 약 47% 정도의 높은 극한하중 값을 보여주며, 파괴형태도 휨/전단파괴모드를 보여 주었다. 웨브의 천공유무 및 간격효과는 잔골재를 부착하지 않은 경우 천공간격이 조밀한 경우가 약 24% 정도 높은 극한하중 값을 보여주었으며, 잔골재를 부착한 경우 천공 간격이 조밀하지 않은 경우가 약 25% 정도 낮은 극한하중 값을 보여주었다. 상부플랜지 영향을 살펴보면, 폭 40mm 경우가 20mm에 비해 약 17% 정도 큰 극한하중 값을 보여주었다.

원심모형 실험을 이용한 반복하중을 받는 모노파일 거동 평가 (Evaluation of Lateral Pile Behavior under Cyclic Loading by Centrifuge Tests)

  • 이명재;유민택;박정준;민경찬
    • 한국지반공학회논문집
    • /
    • 제35권6호
    • /
    • pp.39-48
    • /
    • 2019
  • 본 연구는 원심모형실험을 이용해 건조 사질토 지반에 근입된 모노파일의 수평 반복하중에 대한 거동을 연구하였다. 실험에 사용된 지반 시료는 상대밀도 80%에서 마찰각이 $38^{\circ}$인 건조 주문진 표준사를 사용했다. 실험 과정은 우선 반복하중의 크기를 결정하기 위해 정적 하중 실험을 수행하여 극한하중을 결정하였다. 이를 통해 도출된 극한 하중 값의 30%, 50%, 80%, 120%을 반복하중의 값으로 결정하였고, 반복횟수는 100회로 수행되었다. 이 결과를 통해 실험 반복하중 p-y 곡선을 산정하였고 도출된 하중 별 최대 지반반력점들을 이용하여 깊이 별 반복하중 p-y 중추곡선을 도출하였다. 이를 기존 p-y 곡선과 비교 결과, 동일 깊이에서 초기기울기가 API(1987) p-y 곡선보다 과소평가 되었으며, 극한지반반력은 과대평가되었다. 또한, 동적 p-y 곡선과 비교하였을 때, 동일 깊이에서의 반복하중 p-y 중추곡선의 초기기울기와 지반반력이 작게 평가되었다. 이는 말뚝이 받는 하중 조건에 따라 p-y 곡선을 다르게 적용해야 할 것으로 판단된다.

항만공사에 이용되는 널말뚝의 내진설계 (Seismic Design of Sheet Pile Walls Used in Harbor Construction)

  • 김홍택;방윤경;강인규;조원희
    • 대한토목학회논문집
    • /
    • 제11권4호
    • /
    • pp.171-187
    • /
    • 1991
  • 본 연구에서는 항만공사에 이용되는 캔틸레버식 널말뚝 및 앵커로 지지된 널말뚝의 내진설계를 위한 해석방법의 제시가 이루어졌다. 제시된 해석방법은 침투에 의한 수압 및 유효수평응력의 변화를 고려하였으며, 또한 Mononobe-Okabe 토압이론 및 Westergaard, Matsuo-Ohara의 동수압 계산식이 적용되었다. 아울러 앵커로 지지된 널말뚝의 경우에 대해 안전율의 크기 선택에 관한 비교가 이루어졌으며, 또한 조밀한 모래지반의 경우에 대해, 준설저면의 경사각, 널말뚝 양쪽면의 수위차, 앵커의 위치, 벽마찰각 등이 근입깊이, 앵커하중 및 최대모멘트에 미치는 영향이 분석되었다. 이외에도 조밀한 모래지반에 설치되는 앵커로 지지된 널말뚝의 예비설계를 위한 표의 제시가 이루어졌으며, 본 연구 해석방법의 적용범위는 자유지지법의 경우로 한정된다.

  • PDF

곰소만 바지락(Ruditapes phillippinarum) 양식장 주변 퇴적물 내 유기물과 미량금속 분포특성 (Distributions of Organic Matter and Trace Metals in Surface Sediments around a Manila Clam Ruditapes phillippinarum Farming Area in Gomso Bay, Korea)

  • 최민규;이인석;김청숙;김형철;황동운
    • 한국수산과학회지
    • /
    • 제48권4호
    • /
    • pp.555-563
    • /
    • 2015
  • Organic matter and trace metals were investigated in surface sediments of Gomso Bay, where there is dense Manila clam Ruditapes philippinarum farming activity, to evaluate contamination of sediments in intertidal shellfish farming area. We measured mean grain size (Mz), chemical oxygen demand (COD), ignition loss (IL), acid volatile sulfide (AVS), total organic carbon (TOC), and total nitrogen (TN), and trace metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb and Zn) in intertidal and sublittoral sediments. The intertidal sediments were mainly composed of coarser sediments (sand, silty sand, and sandy silt), with Mz values ranging from 2.61 to 4.79 Ø. Mz and the content of organic matter in sediments were lower in the intertidal zone than in the sublittoral zone. The mean metal concentrations in surface sediments decreased in the order Fe > Mn > Zn > Cr > Pb > Cu > As > Cd > Hg. The metal concentrations in surface sediments showed a significant positive correlation with Mz and organic matter content, indicating that metal concentrations in the surface sediments of Gomso Bay are controlled by Mz and organic matter. The concentrations of organic matter and trace metals in the study region were lower than or similar to those in other intertidal zones in western coast and much lower than those reported in other shellfish farming areas in Korea. Our results suggest that intertidal Manila clam farming sediments from Gomso Bay are not contaminated by organic matter and trace metals.

비틀림전단시험에 의한 모래의 응력 -변형률 거동 (The Stress -Strain Behavior of Sand in Torsion Shear Tests)

  • 남정만;홍원표
    • 한국지반공학회지:지반
    • /
    • 제9권4호
    • /
    • pp.65-82
    • /
    • 1993
  • 주응력회전시 모래의 응력-변형률 거동을 조사하기 위하여 Santa Monies해변의 모래에 대 한 비틀림전단시험이 여러가지 응력경로에 대해 실시되었다. 모래에 대한 비틀림전단시험에서는 점토에서와 달리 Torque의 작용방향을 시계방향과 반시계방향 모두에 대해 작용하였으며, 공시체의 측방변형량 측정도 내부압축실의 체적변형량으로부터 평균 변형량을 측정함으로 점토시 사용하였던 Clip gage를 제거하여 시험을 보다 편리하게 할 수 있었으며 어느 일부분에서 측정했던 측방변형을 대표값으로 사용하였던 단점을 보완하였다. 그리고 공시체의 제작은 모래를 공중낙하법에 의해 실시하여 밀도를 균등하게 만들었으며 공시체의 체적변형량은 COI 가스를 이용하여 체적변형량 측정을 보다 정확하게 할 수 있었다. 시험결과로부터 비틀림전단시험에 의한 모래의 응력 -변형률 거동이 조사되었으며 또한 주응력축 회전효과가 검토되었다. 그리고 연직응력이나 전단응력중 하나가 고정인 상태에서 다른 하중을 작용하였을시 선행하중에 의한 결합효과(coupling effect)에 의해 선행하중에 대한 전단변형률과 연직변형률이 계속 관찰되었다. 한편 축변형률에 대한 주응력비 o1/o3의 관계에서 파괴가 발생하는 축변형률의 위치는 축차주응력비 b(=(o2-o3)/(o1-o3))가 증가함에 따라 감소하는 것으로 나타났다.

  • PDF

국내 및 미국 시방서에 따라 시공된 지중매설관의 동적거동 (Dynamic Behavior of Buried Pipelines Constructed by Domestic and USA Specifications)

  • 전상수;김재민
    • 한국방재학회 논문집
    • /
    • 제11권1호
    • /
    • pp.59-66
    • /
    • 2011
  • 지진재해로 인한 라이프라인의 피해는 구조물의 손상뿐만 아니라, 통신장애, 전력 가스 수자원 등 다양한 생활에너지의 공급에 장애를 발생시킨다. 이러한 지진재해에 효율적으로 대응하기 위해 미국과 일본에서는 HAZUS 및 HERAS와 같은 지진재해평가 시스템을 구축하여 활용하고 있다. 국내에서도 이러한 시스템 구축을 위해 노력하고 있으나, 근본적으로 구조물의 지진 해석을 통한 평가자료가 부족한 실정이다. 이에 본 연구에서는 다양한 구조물 중 국내에 시공된 수많은 매설관을 조사하여 관 재질 특성에 따라 연성관과 취성관으로 분류하고 이에 대한 동적 거동을 분석하였다. 다양한 지진하중 하에서 국내 및 미국의 시공기준에 따라 매설관의 동적 거동을 비교 평가하였다. 본 연구를 통하여 미국 HAZUS 프로그램의 알고리즘에 따른 국내의 매설관 손상평가의 적정성을 조사하였다.

Ground response analysis of a standalone soil column model for IDA of piled foundation bridges

  • Hazem W. Tawadros;Mousa M. Farag;Sameh S.F. Mehanny
    • Earthquakes and Structures
    • /
    • 제24권4호
    • /
    • pp.289-301
    • /
    • 2023
  • Developing a competent soil-bridge interaction model for the seismic analysis of piled foundation bridges is of utmost importance for investigating the seismic response and assessing fragility of these lifeline structures. To this end, ground motion histories are deemed necessary at various depths along the piles supporting the bridge. This may be effectively accomplished through time history analysis of a free-field standalone soil column extending from bedrock level to ground surface subjected to an input bedrock motion at its base. A one-dimensional site/ground response analysis (vide one-directional shear wave propagation through the soil column) is hence conducted in the present research accounting for the nonlinear hysteretic behavior of the soil stratum encompassing the bridge piled foundation. Two homogeneous soil profiles atop of bedrock have been considered for comparison purposes, namely, loose and dense sand. Analysis of the standalone soil column has been performed under a set of ten selected actual bedrock ground motions adopting a nonlinear time domain approach in an incremental dynamic analysis framework. Amplified retrieved PGA and maximum soil shear strains have been generally observed at various depths of the soil column when moving away from bedrock towards ground surface especially at large hazards associated with high (input) PGA values assigned at bedrock. This has been accompanied, however, by some attenuation of the amplified PGA values at shallower depths and at ground surface especially for the loose sand soil and particularly for cases with higher seismic hazards associated with large scaling factors of bedrock records.