• Laser Solutions
• /
• v.1 no.1
• /
• pp.18-23
• /
• 1998

A Study on microstructural changes of sensitized Alloy 600 which was rapidly solidified by a $CO_2$ laser beam was conducted using microscopic equipments such as SEM and TEM. Dissolution of Cr-rich carbides and resultant Cr recovery on the grain boundaries occurred in the heat affected zone (HZA). The microstructure of the laser melted zone (LMZ) having epitaxially solidified from the HAZ was mainly celluar-dendritic with the 〈100〉 crystallographic direction of growth. The Cr concentration was observed to increase along the cell bondaries, and tiny particles were distributed along the cell walls with tangled dislocations around them. Cr-rich carbides had been completely melted by the high density of a laser beam, and were not re-precipitated during the matrix solidification due to a fast cooling rate in the LMZ.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.48-57
• /
• 1996

The weldability of high purity aluminum-lithium binary alloys has been investigated using the Varestraint test. Autogenous GTAW (gas-tungsten-arc-welds) were run along specimens of different lithium concentration using three sets of welding parameters. Welding voltage was held constant at 10 volts. Welding current (70∼100 amps) and travel speed (23∼33 cm/min) were the parameter varied. Hot-tearing susceptibility varied with lithium content and exhibited a steep peak at 2.6 weight percent lithium. Depth of penetration increased with increasing heat input and lithium concentration. The susceptibility is influenced by the wettability of dendrites by the interdendritic eutectic liquid as well as the time available for back-Siting by eutectic liquid. The welding condition of welding current 70A and travel speed 23 cm/min was showed good resistance to cracking in aluminum-lithium alloys. Suggestions for improving weld cracking resistance are also provided.

• Journal of Powder Materials
• /
• v.13 no.5 s.58
• /
• pp.340-350
• /
• 2006

Nanostructured materials exhibit attractive mechanical properties that are often superior to the performance of their coarse-grained counterparts. However, one major drawback is their low ductility, which limits their potential applications. In this paper, different strategies to obtain both high strength and enhanced ductility in nanostructured materials are reported for Ti-base and Zr-base alloys. The first approach consists of designing an in-situ composite microstructure containing ductile bcc or hop dendrites that are homogeneously dispersed in a nanostructured matrix. The second approach is related to refining the eutectic structure of a Ti-Fe-Sn alloy. For all these materials, the microstructure, mechanical properties, deformation and fracture mechanisms will be discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.149.6-149
• /
• 2001

We propose a neuron model that has the interactions between excitation and inhibition. By adopting the knowledge of the physiology, the neuron model by imitating structure of a neuron, has the system resemble a neuron. We considered a neuron system based on the arguments, and wished to examine whether the system had reasonable function Koch, Poggio and Torre believed that inhibition signal would shunt excitation signal on the dendrites. They believed that excitation signal operated input signals and inhibition did as delayed ones. Thus, they were sure that function for directional selectivity was arisen by the shunting. We construct the neuron system with Koch's concept. Our neuron model has 3-layer structure and ...

• Journal of the Korean Ceramic Society
• /
• v.22 no.3
• /
• pp.41-45
• /
• 1985

An experimental study has been carried out to investigate the effect of growth rate V and time on secondary dendrite arm spacing of cristobalite dendrites in $14.6K_2O-85.4SiO_2$ glass by means of x-ray diffractormetry optical microscopy and scanning electron microscopy The scanning lectron microscopy reveals a two-phase layer of dendritic crystals and interstitial melt which grow from the surface at a constant rate. Based on this experiment secondary arm spacing is proportional to V-0.24 and dendrite coarsening during isothermal holding shows that the secondary arm spacing increases with increasing heat-treatment time.

• Korean Journal of Biological Psychiatry
• /
• v.17 no.3
• /
• pp.119-126
• /
• 2010

Synaptic adhesion molecules mediate synapse formation, maturation and maintenance. These proteins are localized at synaptic sites in neuronal axons and dendrites. These proteins function as a bridge of synaptic cleft via interaction with another synaptic adhesion molecules in the opposite side. They can interact with scaffold proteins via intracellular domain and recruit many synaptic proteins, signaling proteins and synaptic vesicles. Scaffold proteins function as a platform in dendritic spines or axonal terminals. Recently, many genetic studies have revealed that synaptic adhesion molecules and scaffold proteins are important in neurodevelopmental disorders, psychotic disorders, mood disorders and anxiety disorders. In this review, fundamental mechanisms of synapse formation and maturation related with synaptic adhesion molecules and scaffold proteins are introduced and their psychiatric implications addressed.

• Journal of Korea Foundry Society
• /
• v.10 no.5
• /
• pp.426-434
• /
• 1990

Continuous casting of the Al-Cu-Ni ternary eutectic alloys was carried out by the upward continuous casting process. The morphology of the ternary eutectic growth and the stability of solid-liquid interface were investigated under various growth conditions. It was possible to get the planar solid-liquid interface at the condition of $G_L/R＝3.59{\times}10^3^{\circ}C\;sec/mm^2$ in Al-Cu-Ni ternary eutectic alloys. In Al-rich, Ni-rich and Cu-rich hypereutectics of Al-Cu-Ni ternary alloys, primary ${\alpha},\;{\tau}\;and\;{\theta}$ dendrites have grown as the leading phase ahead of the ternary eutectic composites.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.247-248
• /
• 2006

In this study, the morphology of the change of primary Al phase in A356 alloy by two kinds of electromagnetic stirrers(vertical and horizontal) were investigated to obtain the globular structure. The effects of the stirring current, the stirring time and the pouring temperature were determined. The greater stirring current and longer stirring time were to get the finer the Al phase. However, over a certain stirring current and stirring time, the primary Al was merged together and was increased. The reason is the degree of breakdown of initial dendrites has been decreased by the collision and coalescence of particles with increasing stirring current and stirring time. The optimum conditions and difference of the two kinds of electromagnetic stirrers have been investigated for rheology forming with controlled solid fraction.

• Applied Microscopy
• /
• v.27 no.3
• /
• pp.281-293
• /
• 1997

The effects of antimetabolite, 6-aminonicotinamide (6-AN), on ultrastrudural changes in the spinal cord of golden hamster were investigated. Intraperitoneal administration of 6-AN (10 mg/kg body weight) every two days gave rise to a marked reduction of about $30\sim40%$ in body weight after $26\sim28$ days ($13\sim14th$ injection). In the lesions of the spinal cord, neuroglial cells such as astrocytes and oligodendrocytes were severely damaged, but neurons and blood vessels were not affected by 6-AN. The myelin sheath was also affected by 6-AN. Vacuoles observed in the lesions were produced by the swelling and degenerating changes of neuropils and neuroglial cells. Numerous swollen mitochondria and cisterns of rough endoplasmic reticulum were observed in the watery cytoplasm of damaged neuroglial cells, but intermediate filaments were well preserved. Especially in the damaged astrocytes, the outer nuclear membrane were partially swollen and formed a halfmoonlike structure. It is suggested that as well as the multivesicular bodies protruding from the swollen dendrites, the conjugation of adjacent vacuoles also participated in the formation of large vacuoles.

• Journal of Korea Foundry Society
• /
• v.6 no.1
• /
• pp.20-26
• /
• 1986

In order to investigate the solidification characteristics of CV. graphite cast iron, decantation technique and thermal analysis test were used. Solidification characteristics were studied in the specimens with various compositions and graphite shape. The results were as follows; 1. The first surface solidifcation layer is formed along the mold wall by the growth of austenite dendrites in hypoeutectic composition and thin solid film in hypereutectic composition. 2. The mushy degree of solidifcation of hypereutiectic composition is higher than that of hypoeutectic. 3. In hypoeutectic, the effect of change of the mushy degree of solidification on the graphite shape is small, however, in hypereutectic the mushy degree of solidification becomes higher in order of flake, CV, and spheroidal graphite cast iron.