• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.429-447
• /
• 2020

The considered simulation tasks are based on an electrometallurgical process development strategy and associated telemanipulator simulation systems are proposed with various scales of experimental facilities. Fundamentally, target facilities are assumed to be operated only by remote handling systems because the considered process is operated in hazardous environments. Futhermore, the feasibility at various scales should be experimentally verified with gradual increase in throughput. In this regard, bench, engineering, and pilot-scale simulation systems are important early-stage tools for assessing the practical operability of the target process with the material handling systems. Such simulation systems are highly customized for applications and are a precursor to larger pilot and demonstration-scale plants. This paper introduced and classified the developed simulator systems for this approach at various scales using remote handling systems which were assembled inside a virtual target facility, and the manmachine interface was included for a more realistic operation of the simulator. The results obtained for each simulator show the feasibility and requirement for improvement of the systems for the considered test issues with respect to the operation and maintenance of the process.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1717-1726
• /
• 2017

In the nuclear industry, mechanical engineers spend a significant portion of their time designing equipment such as manipulators, bogies, mechanical grippers, and so on. Some customized designs can be considered as standard mechanical equipment in this area, although it is not unusual to find that an existing design cannot simply be copied from one project to another. Varied performance requirements can dictate that redesign, often quite extensive redesign, is required. However, if something similar has been done before, engineers could use that as a starting point for the new project. In this regard, this study presents several guidelines inspired by previous design knowledge for similar development cases. Moreover, this study presents more detailed suggestions such as design guidelines for an argon-based hot cell atmosphere and design experience for a large-scale practical hot cell facility. Design considerations and case studies dealt with in this study are dedicated to teleoperation manipulators that are used at a large-scale argon cell facility for pyroprocess integrated inactive demonstration (PRIDE), at the Korea Atomic Energy Research Institute. In particular, for case studies to support the suggested recommendations, a fabricated telemanipulator system for PRIDE is introduced, and several kinds of experimental results associated with it are presented.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1455-1471
• /
• 2009

In order to investigate on the effect of stabilization methods for rice paddies contaminated by heavy metals, a series of lab-scale model test was carried out by applying the characteristics of submerged Paddy soil. To perform the lab-scale model test, columns were made by acrylic with the dimension of diameter=10cm, thickness=0.5cm and were filled with soils which was contaminated were mixed with stabilization agents(lime stone 5% and steel refining slag 5% respectively). To manipulate the reduction condition, soils in the columns were submerged with distilled water. And then soil water and subsurface water in each column were sampled in the regular term and analysed the various physical and chemical properties.

• Korea Journal of Hospital Management
• /
• v.14 no.3
• /
• pp.49-66
• /
• 2009

Purpose : This study was aimed at examining the relationships of university students' self-efficacy to creative disposition and creative thinking ability. Method : A descriptive study was conducted with a sample of 320 students enrolled 4-year-undergraduate academic programs major in nursing as well as elderly care management in one University located in Pusan, Korea. This study used: (a) 24 items of Self-Efficacy Scale originally developed by Kim & Cha(1996), and (b) 39 items of creative thinking ability and 16 items of creative attitudes in a Self-Report Form of Integrative Creativity Scale developed by Bak & Kang(2006). The data were analyzed by using Pearson correlation and hierarchical multiple regression methods. Result : University students' self-efficacy has significantly positive impact on creative thinking ability(p<.001) with 26.4% of the variance and creative disposition(p<.001) with 48.9%. Creative thinking ability as well as the disposition related to creativity that university students possessed were significantly influenced by efficacy on self-control and efficacy on taking difficult tasks. Conclusion : This result supports Social Cognitive Theory and Investment Theory of Creativity in terms that self-efficacy is the factor affecting fostering creative ability and demonstration of creativity potential to the real. This also implies that healthcare educational programs reinforcing students' self-efficacy would contribute to breed them to healthcare professionals with creative competency.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.9-13
• /
• 2015

Energy storage systems (ESS) can be used to provide frequency regulation services in a power system to replace traditional frequency regulation power plants. Battery ESS, in particular, can provide "fast-responding frequency regulation," wherein the facility can respond immediately and accurately to the frequency regulation signal sent by the system operator. This paper presents the development and the trial run results of a frequency regulation control system that uses large-scale ESS for use in a large power system. The control system was developed initially for the 4 MW ESS demonstration facility in Jocheon Jeju Island, and was further developed for use in the 28 MW ESS facility at the Seo-Anseong substation and the 24 MW ESS facility at the Shin-Yongin substation to provide frequency regulation services within mainland Korea. The ESS facility in Seo-Anseong substation responds to a sudden drop in frequency via governor-free control, while the ESS facility in Shin-Yongin responds via automatic generator control (AGC).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.193-193
• /
• 2017

Trend analysis can enhance our knowledge of the dominant processes in the area and contribute to the analysis of future climate projections. The results of previous studies in South Korea showed that southeast regions of Korea had the highest value of evapotranspiration. Thereby, it is of interest to determine the trend analysis in hydrological variables in this area. In this study, the recent 35 year trends of precipitation, reference evapotranspiration, and aridity index in monthly and annual time scale will be analyzed over three stations (Pohang, Daegu, and Pusan) of southeast Korea. After removing the significant Lag-1 serial correlation effect by pre-whitening, non-parametric statistical Mann-Kendall test was used to detect the trends. Also, the slope of trend of the Mann-Kendall test was determined by using Theil-Sen's estimator. The results of the trend analysis of reference evapotranspiration on the annual scale showed the increasing trend for the three mentioned stations, with significant increasing trend for Pusan station. The results obtained from this research can guide development if water management practices and cropping systems in the area that rely on this weather stations. The approaches use and the models fitted in this study can serve as a demonstration of how a time series trend can be analyzed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.22 no.2
• /
• pp.105-115
• /
• 2024

In this study, we employed a small-scale experiment to demonstrate the introduction of a thin copper heat dissipation plate into a bentonite buffer layer of an engineered barrier system. This experiment designed for spent nuclear fuel disposal can effectively reduce the maximum temperature of the bentonite buffer layer, and ultimately, make it possible to reduce the area of the disposal site. For the experiment, a small-scale engineered barrier system with a copper heat dissipation plate was designed and manufactured. the thickness of the cylindrical buffer was about 2 cm, which was about 1/20 of KAERI Repository System (KRS). At a power supply of 250 W, the maximum buffer temperature reduced to a mere 1.8℃ when the thin copper plate was introduced. However, the maximum surface temperature reduced to a remarkable 9.1℃, when a U-collar copper plate was introduced, which had a good contact with the other barrier layers. Consequently, we conclude that the introduction of the thin copper plate into the engineered barrier system for spent nuclear fuel disposal can effectively reduce the maximum buffer temperature in high-level radioactive waste disposal repositories.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.233-244
• /
• 2008

A conceptual design study for a pyroprocesing facility, has been carried out in this study, which is available for the recovery of uranium and transuranic elemental group(TRU), that is, reusable as a nuclear fuel especially in a next generation-type reactor. The scale of this facility has been chosen as 20 kg HM/batch, comparatively small engineering size in order to collect scale-up data for the design of a commercial facility as well as to get operational experience. The spent fuel to be handled in this process is as follows : 3.5 % enriched uranium fuel, 35,000MWd/tU and 5-year cooled. The major items considered in the conceptual study are a building lay-out including various hot cells, safety management of the process operation in conjunction with material balance control, radiation safety, inert atmosphere control in shielded hot cells, and criticality control of uranium and TRU products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.4
• /
• pp.571-582
• /
• 1994

Three livestock/crop demonstration-cum-training farms have been established on plots of half, one and two acres, typical of the "Kandyan Forest Garden System" Vegetables, bananas, pepper, coffee, coconut and fruit trees are widely spaced, for intercropping with grass, and have been surrounded with live fences that also provide fodder for livestock to increase the family income. Each unit is operated by a selected employee and his family under a monthly incentive scheme based upon the gross margin. On these farms the technical parameters in dairying are better than elsewhere in the Mid-Country. Economic performance over 1985-1992 showed that dairying contributed most to the total gross margin of the half, one and two acre units, i.e. 31, 63 and 69%, respectively. Next came crops (29%, 37% and 19%), poultry (22%, 0% and 9%), and goats (18%, 0% and 3%). In the three farms the cash income per Sri Lankan Rupee spent was 1.5, 4.6 and 2.1, respectively. The overall ratio was 3.2 for dairying, 1.1 for poultry, 4.5 for goats and 9.9 for crops. Actual family labour in the three farms was 548, 548 and 639 days, compared to the 270, 330 and 440 days anticipated in the initial feasibility study. The average incentive payments, which were 20% (half acre), 61% (one acre) and 133% (two acres) of the parastatal salary of the employee, were only insufficient for the extra labour applied in the half acre unit. Dairying and goats proved to be attractive cash earners with a domestic fuel were important benefits. Poultry did little to improve farm income.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1083-1095
• /
• 2016

The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V&V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V&V, and the performance test results of the model pump in sodiumshowed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.