In this study, we consider infinite supply of raw materials and backlogged demands as given two boundary conditions. And we need not make any specific assumptions about the inter-arrival of external demand and service time distributions. Under these situations, the ultimate objective of this study is to prove the variability propagation principle in a pull serial line and is to measure it in terms of the first two moments of the inter-departure process subject to number of cards in each cell. Two preparations are required to achieve this objective : The one is to derive a true lower bound of variance of the inter-departure process. The other is to establish a constrained discrete minimax problem for the no backorder (backlogging) probabilities in each cell. We may get some fundamental results necessary to a completion for the proof through the necessary and sufficient conditions for existence of optimal solution of a constrained discrete minimax problem and the implicit function theorem. finally, we propose a numeric model to measure the variability propagation principle. Numeric examples show the validity and applicability of our study.
Purpose Although companies occupied the network market take the advantageous position first and can be successful in securing users over a certain size, it is important to satisfy the customers' demand and prevent the outflow of users toward a new alternative SNS. What is more, there are frequent changes in the flow of users toward new SNSs. Despite these dynamic market circumstances, there is a lack of research to explain the switching behaviors of SNS users. Design/methodology/approach The objective of this study is to explain and verify a specified migration theory(Push-Pull-Mooring model) focused on SNS fatigue in the psychological point of view, as well as reviewing previous studies on functional and technical characteristics of SNSs themselves. Moreover, this study tried to highlight factors affecting users actual SNS switch rather than their switching intention. Findings According to the statistical analysis, the most influenced pull factor to switch SNS was the alternative attractiveness. On the other hand, undesired relationship burden, service innovation and important mooring factors to prevent users' SNS switch. This study has a significant contribution to the theory, which analyzed users' actual SNS switch, and examined SNS users' psychological factors(SNS fatigue), reviewing the characteristics of existing services. To secure more users and to keep them, companies providing social network service need to develop differentiated strategies by analyzing psychological characteristics of various users.
Semiconductor industry is the one whose supply chain network is distributed all over the world. And it has different characteristics with other manufacturing industries as reentrancy, binning, substitution. In this paper, we suggest supply chain models for the semiconductor industry, consisting of production and distribution chains, where manufacturing characteristics are considered. Three policies for the production chain and two policies for the distribution chain are suggested and formulated mathematically. Six combination policies are tested for the evaluation of performances with example. It is shown that the supply chain is operated, if production and distribution are coordinated and managed based on the demand information, without inventory, as efficiently as the chain with inventory.
The steel bars account for a high percentage of material costs for the current construction projects. At the present time, most of the construction projects for the factories of thin-film transistor liquid crystal display (TFT-LCD) complete the transactions of steel bars when the suppliers ship the steel bars to the temporary storage/processing sites. This paper applies the buy-in concept in the Theory of Constraint (TOC) on the supply chain of steel bars. In this study, suppliers are required to establish warehouses at the construction sites and complete the transactions when the formed and processed steel bars are shipped into the factory sites. The aim is to find a win-win solution to meet with the expectations from constructors as they hope that there is no need to build up inventories but supply is ready at any time. Also, this paper compares and analyzes the traditional supply/inventory model of steel bars and the Demand-Pull (D-P) model under the TOC framework. It is proved that Vendor Management Inventory (VMI) in the D-P model is able to more effectively manage steel bars as a material.
한국경제는 지난 수십년간 정부의 수출전략정책에 힘입어 지속적으로 경제 성장을 이룩해왔으며, 수출의 증가는 경제의 효율성 향상, 고용창출, 기술개발 촉진 등 우리나라의 경제 성장을 견인하는 주도적인 역할을 해왔다. 전통적으로 우리나라 수출에 영향을 미치는 주요 요인은 크게 경제적 요인과 산업구조적 요인이라는 두가지 관점에서 찾아볼 수 있다. 첫번째, 경제적 요인은 환율과 글로벌 경기 변동과 관련된 것으로서, 환율이 우리나라 수출에 미치는 영향은 환율 수준 및 환율 변동성에 따른 영향으로 나누어 살펴볼 수 있으며, 글로벌 경기 변동은 세계 수입 수요에 영향을 미쳐 우리나라 수출을 좌우하는 절대적 요인으로 볼 수 있다. 두 번째, 산업구조적 요인은 국제 분업화의 둔화, 중국의 특정 수입품 자국내 대체 증가, 수출 주력 산업의 해외생산 형태 변화 등 산업이나 제품에 따라 발생한 고유한 특징이다. 가장 최근 글로벌 교류와 관련된 연구들을 살펴보면, 경제적 요인 및 산업구조적 요인과 더불어 문화적인 측면이 중요함을 여러 문헌에서 피력하고 있다. 이에 따라 본 연구에서는 각국의 한국 수입액 예측 모형에 문화적 요인을 함께 반영하여 예측 모형을 개발하고자 하였으며, 구체적으로 문화적 요인이 수입액에 미치는 영향을 PUSH-PULL 프레임워크 관점에서 반영해보고자 하였다. PUSH 관점은 한국이 자신의 브랜드를 개발하고 적극 홍보하는 관점으로 K-POP, K-FOOD, K-CULTURE 등으로 대표되는 한국의 브랜드에 대한 각국의 관심 정도로 정의할 수 있다. 또한, PULL 관점은 각 국가의 국민들의 문화적, 심리적 특징으로 해당 국가의 지배체계, 남성성, 위험 회피성, 시간에 대한 단기/장기 지향성 등으로 대표되는 각 국의 문화 코드로서 한류문화를 얼마나 수용할 성향을 띄고 있는지로 정의할 수 있다. 본 연구에서 제시한 최종 예측 모델의 고유한 특징은 Design Principle에 기반하여 설계한 것인데, 1) 신규로 추가한 데이터 소스를 통해 한국에 대한 관심 및 문화적 특성이 반영될 수 있는 모형으로 구축하였고, 2) 경제적 요인 등의 변화와 품목 및 국가 Code를 입력하면 예측값을 바로 불러올 수 있도록 실용적으로 편의성 있게 설계하였으며, 3) 이론적으로도 의미 있는 결과를 도출하기 위해서 입력과 목표 변수간의 관계를 해석 가능한 알고리즘을 중심으로 설계하였다는 점이다. 본 연구는 기술적 측면, 경제적 측면, 정책적 측면에서 의미 있는 시사점을 제시할 수 있으며, 수입액 예측 모형을 활용하여 중소·중견기업의 수출 지원 전략에 의미 있는 기여를 할 수 있을 것으로 기대된다.
MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.
The skyrocketing inflation of medical costs has become a major health problem among most developed countries. Korea, which recently covered the entire population with National Health Insurance, is facing the same problem. The proportion of health expenditure to GNP has increased from 3% to 4.8% during the last decade. This was remarkable, if we consider the rapid economic growth during that time. A few policy analysts began to raise cost containment as an agenda, after recognizing the importance of medical cost inflation. In order to Prepare an appropriate alternative for the agenda, it is necessary to find out reasons for the cost inflation. Then, we should focus on the reasons which are controllable, and those whose control are socially desirable. This study is designed to articulate the theory of medical cost inflation through literature reviews, to find out reasons for cost inflation, by analyzing aggregated data with a deterministic model. Finally to identify determinants of changes in both medical demand and service intensity which are major reasons for cost inflation. The reasons for cost inflation are classified into cost push inflation and demand pull inflation, The former consists of increases in price and intensity of services, while the latter is made of consumer derived demand and supplier induced demand. We used a time series (1983-1987), and cross sectional (over regions) data of health insurance. The deterministic model reveals, that an increase in service intensity is a major cause of inflation in the case of inpatient care, while, more utilization, is a primary attribute in the case of physician visits. Multiple regression analysis shows that an increase in hospital beds is a leading explanatory variable for the increase in hospital care. It also reveals, that an introduction of a deductible clause, an increase in hospital beds and degree of urbanization, are statistically significant variables explaining physician visits. The results are consistent with the existing theory, The magnitude of service intensity is influenced by the level of co-payment, the proportion of old age and an increase in co-payment. In short, an increase in co-payment reduced the utilization, but it induced more intensities or services. We can conclude that the strict fee regulation or increase in the level of co-payment can not be an effective measure for cost containment under the fee for service system. Because the provider can react against the regulation by inducing more services.
석션 앵커는 비교적 간편한 설치 방식과 높은 안정성으로 인해 부유식 구조물을 고정하기 위한 기초로 사용된다. 최근, 허용 변위가 작은 부유식 구조물이 증가함에 따라, 석션 앵커의 유발 변위 평가에 대한 수요가 높아졌다. 하지만, 기존 석션 앵커의 연구는 앵커 지지력 평가에 초점을 두었으며, 앵커의 변위에 관한 연구는 중점적으로 수행되지 않았다. 특히, 경사진 하중을 받는 석션 앵커의 주된 변위인, 회전 거동을 평가한 연구는 매우 부족한 실정이다. 따라서 본 논문에서는 경사 인발 하중이 작용하는 석션 앵커의 회전 거동을 모형실험을 통해 비교 및 분석 하였다. 모형실험은 센트리퓨지 실험 장비를 사용하였으며, 실험 변수로는 하중의 경사도, 앵커의 크기 및 종횡비가 고려되었다. 하중-회전 변위 곡선을 산정하여, 실험 변수에 따른 석션 앵커의 회전량을 비교하였다. 실험 결과, 석션 앵커의 회전 거동은 하중의 경사도에 큰 영향을 받았으며, 앵커의 크기 및 종횡비에 따른 회전량의 차이는 크지 않았다.
Toe public library may perform a social good only when its objectives are adequate to the community's needs. The present purpose of the public library in the Korean Library Act has no direct concern for our social needs from its very beginning because it was not created in response to our social needs but transplanted from American principles. It is, therefore. difficult to expect socially useful output of our public library programs under the present purpose which may be inadequate to our social tradition and needs. This study purposes to examine validity of the present purpose of the public library in the Korean Library Act, in the light of our community needs and our own library tradition. The methods employed to achieve the purpose of the study are (1) to survey needs of the library frequenters through questionnaire, and interviews with the public librarians in Seoul, (2) to gather the statistical data relevant to, and supporting, the hypothesis, and (3) to compare our social background with that of the United States of which the American purpose, a model for our present purpose, came out. The conclusion is as follows: A. The idea to induce people to pull themselves upward by providing for all the members of the community access to the world's best books shelved in the public library should be abandoned. The reasons are (1) that the idea is alien in our public library tradition, (2) that little demand of the community goes with the idea, and (3) that reading outside the library has come into wide practice, thanks to recent increase in individual income and that in publications. B. That the public library maintains fiction and other recreational reading materials is meaningless in the light of the community needs. These are the two explanations supporting the thesis. (1) The "uplift" theory has proved inoperative and people apparently do not progress from, light fiction to more respectable fare. (2) The conviction that fiction and other recreational reading materials keep the middling classes from the "vicious" entertainments maintaining order in the community by giving them a harmless source of recreation has lost its significance as the modern society provides a number of choices in recreation: television is an obvious example. C. The nature of the informational needs of the community has radically changed, so radically as to require substantial changes in the outlook, collections, and services of the public library, which is :slow in adopting itself to the new social surroundings in Korea. D. 92.2 per Cent of the present frequenters of the public library are high school and college students. Since the library is to meet the existing community needs it should turn its attention to the student group, and develop the means to serve it better, not the "theoretical group of specialists who do not come to "the public library. E. In revision of the purpose of the public library, priority of each objective should be given. The priorities in the last analysis are research and information. culture, recreation in that order.
블록체인은 인공지능, 빅데이터, 사물인터넷 등과 더불어 혁신적인 기술로 간주된다. 최초의 블록체인 애를리케이션이고 암호화폐인 비트코인 출시 이래로, 블록체인은 파괴적 기술로의 인식은 물론 폭 넓게 확산되지도 못하고 있다. 블록체인 관련 연구를 살펴보면, 암호화폐, 기술 일반동향과 전망, 요소기술 등에 대한 설명이 대부분이다. 물론 아직까지 블록체인 기반의 킬러 애플리케이션이 존재하지 않고 있다. 이와 같이 늦게 확산되는 블록체인 기술을 고려하여, 국내의 블록체인에 대한 최신 연구 상황에 대한 이해가 필요하다. 본 연구의 목적은 기업의 IT실무 담당자들이 조직의 경쟁력을 높이기 위해서 필요한 블록체인 애플리케이션을 식별할 수 있도록 가이드라인을 제공하는 것이다. 이를 위해서 우리는 네 가지의 접근법을 소개한다. 첫째, Iansiti & Lakhaki(2017)가 제안한 분석틀을 적용하여 국내에서 발간된 블록체인 관련 연구논문을 분류하였다. 이 작업의 목적은 조직의 실무자들이 블록체인 애플리케이션의 도입을 고려할 때 벤치마크 또는 사례로서 활용할 수 있도록 도움을 주기 위함이다. 두 번째는 제시된 분석틀을 이용하여 블록체인 애플리케이션의 가치 개념을 도입하여 조직의 블록체인 애플리케이션 채택의 진화적 경로를 제안하였다. 세 번째는, 블록체인 기술 도입을 조직의 혁신을 촉진하기 위한 수요관점에서블록체인 기술 적용이 가능한 영역을 식별할 수 있는 근거를 제공하였다. 네 번째는 기업 가치사슬 모형과 다섯 경쟁세력 모형을 이용하여 블록체인 애플리케이션 도입의 탐색할 수 있는 근거를 제공하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.