• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1526-1531
• /
• 2024

¹³¹I is a fission product produced in a nuclear reactor by irradiating tellurium dioxide, with a half-life of 8.02 day. The most important and widely used method for making ¹³¹I is irradiation using a nuclear reactor and post-irradiation followed by dry distillation. The advantage of the dry distillation process is that the process and the equipment are relatively simple, namely TeO₂ (m.p. 750 ℃), which can withstand heating during reactor irradiation. Based on TeO₂ irradiation by neutron following the technique of dry distillation was explained for production of ¹³¹I on a large scale. A dry distillation followed the radioisotope production operation using the 30 MW GA Siwabessy nuclear reactor to meet national demand. TeO₂ targets are 25 and 50 g irradiated for 87-100 h. The resulting ¹³¹I activity is 20.29339-368.50335GBq. According to the requirements imposed on the radionuclide purity of the preparation, the contribution of ¹³¹I training in the resulting preparation was not less than 99.9 %

• 마이크로전자및패키징학회지
• /
• 제31권1호
• /
• pp.16-22
• /
• 2024

전기자동차와 신재생에너지에 관한 관심이 높아지면서 건설장비 산업분야에서도 리튬이온 배터리를 접목하려는 요구가 높아지고 있다. 건설중장비는 건설 현장의 다양한 작업으로 인해 전류 용량의 감소가 급속히 진행되기 때문에 SOC(State of Charge) 및 SOH(State of Health) 같은 배터리의 상태를 더욱 정확하게 추정할 필요가 있다. 본 논문에서는 SOC와 SOH를 동시에 추정이 가능한 적응제어 기법 기반 이중확장칼만필터(Dual Extended Kalman Filter, DEKF) 알고리즘을 이용하여 실제 측정데이터와의 오차를 비교하였다. 배터리 충전 상태 예측을 위해 배터리 셀을 완전 충전 후 0.2C-rate조건에서 SOC 5% 간격으로 OCV를 측정하였고, 배터리의 열화를 판단할 수 있는 건전성 지표 확보를 위해 다양한 C-rate(0.2, 0.3, 0.5, 1.0, 1.5C rate) 조건에서 50 Cycle 동안 노화 실험을 수행하였다. DEKF를 이용한 SOC 및 SOH 추정 오차는 C-rate이 커질수록 커지는 경향을 보였으며 특히 SOC 추정결과, 0.2, 0.5 및 1C-rate에서 6%이하로 나타남을 확인하였다. 또한 SOH 추정 결과는 0.2 와 0.3C-rate에서 각각 최대오차 1.0% 및 1.3% 이내로 좋은 성능을 보이는 것으로 확인하였다. 다만, C-rate가 0.5C-rate에서 1.5C-rate으로 증가함에 따라 추정오차도 1.5%에서 2%로 다소 증가하는 것을 확인할 수 있었으나, 모든 C-rate 조건에서 DEKF를 사용한 SOH의 추정 성능은 약 2% 이내인 것으로 나타났다.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.416-423
• /
• 2023

무화과는 잎, 뿌리, 줄기, 라텍스 외에 열매 자체에서도 각각 항산화, 미백, 항염증, 항균 효능이 보고된다. 본 연구팀에서는 천연물 기반 화장품 소재 개발을 위해 무화과 열매 l atex에 존재하는 ficin 효소의 피부 활성 뿐만 아니라 열매를 70% 에탄올로 추출한 추출물의 미백 기능에 대해 연구 결과를 도출하여 화장품 원료로 직접 사용하고있다. 그러나 새로운 공융용매 추출법 개발 수요와 이를 활용한 피부 염증 완화 및 건선 조절기능에 대한 연구는 거의 없다. 따라서 본 연구에서는 공융용매 추출법을 적용한 무화과 열매 추출 및 분획물들에 피부 염증 조절 및 건선에 대한 유효성 평가를 수행하였다. 먼저, 무화과 열매를 최적의 공융용매 조건으로 추출한 후 n-hexane, dichloromethane, ethyl acetate. butanol로 분획한 분획물의 피부염증 조절 기능을 비교하였다. 먼저, 분획물의 항산화 활성과 RAW264.7 세포주에서 nitric oxide 생성 억제를 확인하였다. 또한 RT-PCR을 이용해 전염증성 사이토카인 mRNA 발현 조절을 관찰한 결과, 여러 분획물 중 hexane, dichloromethane, ethyl acetate와 같은 비극성 용매에서 TNF-α, IL-1α, IL-1β 등 염증성 사이토카인 mRNA 발현이 억제되었다. 뿐만 아니라 HaCaT 각질형성세포 모델에서 TNF-α 로 염증반응을 유도한 후 분획물의 항염증 활성을 비교한 결과 hexane, dichloromethane, ethyl acetate 분획에서 높은 활성을 확인하였다. 마지막으로 in vitro 인간 건선 세포모델에서 chemokine CC motif ligand 20(CCL20) 발현을 확인한 결과 유의성 있게 mRNA 발현 이 억제되었다. 따라서, 공융용매 추출 후 무화과 열매 분획물 중 hexane, dichloromethane, ethyl acetate 분획에서 높은 항염증 활성 및 CCL20 케모카인 조절 기능이 확인되었다. 이런 결과들은 무화과 열매 추출물의 항염증 활성과 함께 인체적용시험을 통해 피부진정 효과가 검증된다면 향후 뛰어난 피부 진정 천연 화장품 소재로 개발될 가능성이 높다고 사료된다.

• KDI Journal of Economic Policy
• /
• 제14권2호
• /
• pp.109-153
• /
• 1992

본고(本稿)에서는 우리나라 은행산업(銀行産業)의 트랜스로그비용함수(費用函數)와 규모(規模) 및 범위(範圍)의 경제성(經濟性), 비용(費用)의 보완성(補完性) 그리고 경쟁적(競爭的) 생존력(生存力) 등 효율성지표들을 추정함으로써 은행산업(銀行産業)의 효율성(效率性)을 평가하고 제도개선방향(制度改善方向)에 대한 시사점을 논하였다. 추정결과에 의하면, 우선 규모(規模)의 경제성(經濟性)의 경우는 은행대출(銀行貸出)이 규모(規模)의 비경제하(非經濟下)에 있고 모든 다른 업무(業務)들은 규모(規模)의 경제(經濟)를 시현하고 있지만, 전업무에 걸친 규모(規模)의 경제(經濟)는 부재(不在)하는 것으로 관찰된다. 다음, 범위(範圍)의 경제(經濟)의 경우는 유가증권투자(有價證券投資)와 신탁자산(信託資産) 및 수신(受信) 등은 범위(範圍)의 경제하(經濟下)에 있는 반면, 은행예금(銀行預金)은 범위(範圍)의 비경제하(非經濟下)에 있고 전업무에 걸친 범위(範圍)의 경제(經濟)는 강한 것으로 관찰되고 있다. 그리고 비용보완성(費用補完性)의 경우는 유가증권투자(有價證券投資)가 은행대출(銀行貸出), 예금(預金) 및 신탁업무(信託業務)와, 그리고 신탁자산운용업무(信託資産運用業務)가 은행자산운용업무(銀行資産運用業務)와 각각 비용보완관계(費用補完關係)를 보이고 있는 반면, 은행예금(銀行預金)은 특히 은행대출(銀行貸出)과 그리고 신탁자산업무(信託資産業務)와 경쟁관계에 있다. 한편 은행산업(銀行産業)에는 경쟁적(競爭的) 생존력(生存力)이 부재(不在)하는 것으로 관찰되고 있다. 이상의 결과들의 시사점을 정리하면, 우선 은행대출(銀行貸出)은 상대적으로 규모를 축소하고 여타의 모든 은행업무(銀行業務)나 신탁업무(信託業務)들은 규모를 확대함으로써 효율성제고(效率性提高)에 기여할 수 있을 것이며, 은행예금(銀行預金)과 은행주변업무는 앞으로 금융(金融)의 심화(深化)가 진행되면 여타업무에서 분리되어 각각 독립 운영될 가능성이 높다. 유가증권업무(有價證券業務)와 신탁자산(信託資産) 및 수신업무(受信業務)들을 추가확대함으로써 은행업무(銀行業務)의 효율성(效率性)이 증대될 수 있을 것으로 보여 겸업주의(兼業主義) 은행제도(銀行制度)의 타당성은 높지만, 은행산업(銀行産業)의 자연독점적인 성격은 부재(不在)하여 섣부른 규모(規模)만의 확대(擴大)는 오히려 경쟁력(競爭力)을 저하시킬 수도 있을 것이다.

• 지능정보연구
• /
• 제25권4호
• /
• pp.35-52
• /
• 2019

전자정부를 포함한 다양한 형태의 공공서비스가 제공됨에 따라 공공서비스 품질에 대한 국민의 요구 수준이 점점 높아지고 있다. 공공서비스의 품질을 높이기 위해서 공공서비스 품질에 대한 상시적 측정과 개선이 필요함에도 불구하고 전통적인 설문조사는 비용과 시간이 많이 소요되어 한계가 있다. 따라서 공공서비스에서 발생하는 데이터를 기반으로 원하는 시점에 언제라도 공공서비스의 품질을 빠르고 정확하게 측정할 수 있는 분석적 기법이 필요하다. 본 연구에서 공공서비스의 품질을 데이터 기반으로 분석하기 위해 N시의 건축 인허가 민원 서비스를 대상으로 프로세스 마이닝 기법을 이용하여 분석하였다. N시의 건축 인허가 민원 서비스는 분석에 필요한 데이터를 확보할 수 있고 공공서비스 품질관리를 통해 타 기관으로 확산 가능할 것으로 판단되었기 때문이다. 본 연구는 2014년 1월부터 2년 동안 N시에서 발생한 총 3678건의 건축 인허가 민원 서비스에 대해 프로세스 마이닝을 실시하여 프로세스 맵을 그리고 빈도가 높은 부서와 평균작업시간이 긴 부서를 파악하였다. 분석 결과에 따르면 특정 시점에 한 부서별로 업무가 몰리거나 상대적으로 업무가 적은 경우가 발생하였다. 또한 민원의 부하가 늘 경우 민원완료까지 걸리는 시간이 늘어날 것이라는 합리적인 의심을 하였으나 분석 결과 상관관계는 크게 없었다. 분석 결과에 따르면 민원완료까지 걸리는 시간은 당일처리에서 1년 146일까지 매우 다양하게 분포하였다. '하수처리과,' '수도과,' '도시디자인과,' '녹색성장과'의 상위 4개 부서의 누적빈도가 전체의 50%를 넘고 상위 9개 부서의 누적빈도가 70%를 넘어서는 등 빈도가 높은 부서는 한정적이며 부서 간 부하의 불균형이 심했다. 대부분의 민원 서비스는 서로 다른 다양한 패턴의 프로세스를 갖고 있었다. 본 연구의 결과를 활용하면 특정 시점에 민원의 부하가 큰 부서를 찾아내 부서 간 인력 배치를 탄력적으로 운영할 수 있을 것이다. 또한 민원 특성별 협의에 참여하는 부서의 패턴을 분석한 결과, 협의 부서 요청 시 자동화 혹은 추천에 활용할 수 있는 가능성이 보인다. 본 연구는 민원 서비스에 대한 프로세스 마이닝 분석을 통해 향후 공공서비스 품질 개선방향을 제시하는데 활용될 것으로 기대한다.

• 미술자료
• /
• 제96권
• /
• pp.239-260
• /
• 2019

본 논고는 19세기 이후 형성된 서화(書畫)의 유통과 확산의 양상을 당시 활발히 제작된 장식병풍 중 하나인 <백선도(百扇圖)>의 예를 통해 살펴본 글이다. 백선도는 화면에 다양한 형태의 부채를 겹쳐서 배치하고 각각의 선면(扇面) 안에 여러 종류의 화제(畫題)를 그린 것을 말한다. 부채와 선면화(扇面畫)라는 소재는 이전부터 존재하였지만 장식용 회화의 소재로 등장한 것은 19세기 이후로, 호사취미 경향을 반영하여 주로 병풍(屛風)으로 활발히 제작되었다. 지난 2016년 국립중앙박물관 특별전 '미술 속 도시, 도시 속 미술'에서 독일로텐바움세계문화예술박물관 소장 <백선도>가 새로이 소개된 바 있다. 6폭으로 구성된 이 병풍에는 한 폭 당 5개 이상의 다양한 종류의 부채들이 등장하고 각 부채 면에는 단순히 채색한 것 뿐 아니라 다양한 화목(畫目)의 그림들이 남아있다. 무엇보다 이 작품을 주목해야 하는 것은 국립중앙박물관에 동일한 초본(草本)이 전하고 있기 때문이다. 19세기에 들어서면서 이전의 왕실이나 사대부들이 사적인 공간에서 향유하였던 서화(書畫)는 민간으로 확산되었고 시장을 통한 유통의 단계로 넓어졌다. 집안을 꾸미고 장식하는 풍조에 따라 화려한 장식그림들이 선호되었고, 한 폭에 다양한 형태의 화면과 다채로운 畫目(화목)의 그림을 그려 완성하는 백납도병풍 제작이 성행하였다. 로텐바움박물관 소장 한국 컬렉션의 상당수는 독일 주재 조선국 총영사이자 독일의 사업가였던 하인리히 콘스탄틴 에두아르 마이어(Heinrich Constantin Eduard Meyer, 1841~1926)의 수집품이다. 그는 1890년대 후반부터 1905년까지 조선과 독일을 오가며 다양한 유물들을 수집하여 독일에 돌아가 1909년까지 순차적으로 수집품을 로텐바움박물관에 전달하였으며, <백선도>도 그 중 하나이다. 새롭고 장식미가 돋보이는 <백선도>는 조선에 들어와 있던 외국인들의 이목을 집중시키기에 충분했을 것이다. 로텐바움박물관 소장 <백납도>는 제2폭의 뒷면에 "동현(銅峴)"이라는 지명이 적힌 종이조각이 거꾸로 붙어있어 흥미를 끈다. 동현은 지금의 서울 을지로 1가와 을지로2가 사이에 위치했던 곳이며, 조선시대에는 도화서(圖畫署)를 비롯한 혜민서(惠民署)·장악원(掌樂院) 등의 관청과 시전(市廛)이 있어 가내수공업이 성하던 지역이었다. 실제로 1900년대 초 이곳에는 서화를 유통하는 상점들이 자리잡고 있었기 때문에, 마이어가 수집했던 서화들의 구입처가 동현에 위치했었을 가능성은 매우 높다고 하겠다. 로텐바움박물관 소장 <백선도>는 총 6폭의 병풍으로, 1980년대에 한국 서화 소장품들을 수리하는 과정에서 현재의 모습을 갖춘 것으로 보인다. 국립중앙박물관 소장 <백선도 초본>은 1945년부터 1950년 사이 국립민족박물관에 입수된 작품이다. <백선도 초본>은 총 7점으로, 7점 중 6면 화면의 여백에 화면의 순서까지 정해져 있어 본래 총 8폭 병풍용 초본임을 알 수 있다. 한 화면에는 5개 이상의 다양한 접선(摺扇)과 단선(團扇)들이 배열해있는데, 작은 장식에서부터 부챗살의 문양까지 초본부터 사실적으로 묘사되었음을 볼 수 있다. 여기에 '석간주(石間朱)', '홍(紅)', '묵(墨)', '청(靑)' 등과 같이 부채에 들어갈 색 대부분을 지정하고, 빈 부채에는 '유(油)'라고 적거나 비워두었으며 이 중 10개의 부채에는 화훼초충도(花卉草蟲圖)나 고사인물도의 밑그림이 남아있다. 이를 실제 로텐바움박물관 소장 <백선도>와 비교하면 화면의 크기와 비례까지 정확하게 일치하고 있어, 초본의 매뉴얼을 그대로 따르고 있음을 보여준다. 이 작품의 펼쳐진 부채 면에는 산수, 고사인물, 화조, 영모, 초충, 어해 등 다양한 장르의 그림이 그려져 있는데 화접도(花蝶圖)나 어해도(魚蟹圖) 등은 19세기 유행하였던 소재로 당시 화단의 경향을 잘 보여준다. 이 작품에서 주목할 것은 김홍도(金弘道)의 전형적인 화풍을 연상시키는 장면들이 다수 포함되어 있다는 점이다. 이는 지금까지 알려진 백선도나 백납도에서는 찾아보기 어려운 특징이다. 서원아집도(西園雅集圖)는 상대적으로 제한된 작은 화면에 그려야 하는 백납도나 백선도의 특성상 잘 다루지 않는 소재로, 국립중앙박물관 소장 김홍도의 <서원아집도>병풍과 화면의 구성이나 화풍 모두 매우 흡사하다. 더구나 <백선도>병풍의 몇몇 장면은 김홍도의 작품 중에서도 1796년작 《병진년화첩(丙辰年畫帖)》과 유사한 화면들을 다수 발견할 수 있어 흥미롭다. <사인암(舍人巖)>과 흡사한 산수도(山水圖)를 비롯하여 <서원아집도>, <쌍치도(雙雉圖)> 등에서 김홍도 화풍을 연상시킨다. 따라서 부채 속 그림을 그린 인물은 김홍도 화풍의 영향을 받은 직업화가일 것으로 보이며, 작가는 《병진년화첩》을 직접 감상한 적이 있거나, 서화시장에 《병진년화첩》을 베껴 그린 부본(副本)이 유통되었을 가능성이 매우 높다. 현재까지 알려진 병풍으로 된 백선도는 10점 내외인 것으로 파악되며, 이 작품들을 비교해보면 화면의 구성이 부채 1개 정도 차이가 있거나 비례와 좌우가 바뀌었을 뿐 화면구성이 매우 유사함을 찾아볼 수 있다. 이처럼 일정한 패턴의 화면구성은 같은 시기 민간에서 성행한 책가도(冊架圖)에서도 찾아볼 수 있는 특징으로, 19세기 서화의 수요층이 넓어짐에 따라 세밀한 표현과 화려한 장식성이 요구되는 회화들의 대량 제작을 위한 초본이 존재했음을 보여준다. 특히 도안이 복잡하여 범본이 필요한 곽분양행락도나 요지연도, 백동자도, 해학반도도 등의 규모가 큰 장식병풍에서 적극 활용되었으며, 실제 남아있는 작품에서 몇 가지의 도상들이 반복하여 등장하고 있어 초본을 참고했던 흔적을 찾아볼 수 있다. 시장의 수요에 맞추어 대량 제작할 수 있는 초본 활용이 성행했던 당시의 경향은 화면을 다채로운 부채들로 채우고 그 부채 면에 각기 다른 그림을 그려야하는 백선도 제작에 있어서도, 초본을 요긴하게 사용했음을 보여준다. 더구나 테두리를 그은 후 다양한 화목의 그림을 담는 백납도에 비해 백선도는 다양한 형태의 부채들을 먼저 그려야하는 공정을 거쳐야 했기 때문에, 대량 제작이 어렵고 그만큼 남아있는 작품이 상대적으로 적은 원인으로 생각된다. 이처럼 로텐바움박물관 소장 <백선도> 병풍과 국립중앙박물관 <백선도 초본>은 새로운 화풍이 수용되어 시도되었던 조선 말기 화단의 경향을 잘 보여주는 예라 하겠다. 다수의 백선도들이 박기준의 작품과 유사한 화풍과 화면 구성 보이는 것에 비해, 김홍도의 영향이 분명히 드러나는 매우 이례적인 예라는 점에서 앞으로도 더욱 심층적인 분석이 요구되는 작품이다.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.59-88
• /
• 2008

Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

• Clinical and Experimental Reproductive Medicine
• /
• 제2권2호
• /
• pp.27-36
• /
• 1975

The success of the family planning program in Korea is reflected in the decrease in the growth rate from 3.0% in 1962 to 2.0% in 1971, and in the decrease in the fertility rate from 43/1,000 in 1960 to 29/1,000 in 1970. However, it would be erroneous to attribute these reductions entirely to the family planning program. Other socio-economic factors, such as the increasing age at marriage and the increasing use of induced abortions, definitely had an impact on the lowered growth and fertility rate. Despite the relative success of the program to data in meeting its goals, there is no room for complacency. Meeting the goal of a further reduction in the population growth rate to 1.3% by 1981 is a much more difficult task than any one faced in the past. Not only must fertility be lowered further, but the size of the target population itself will expand tremendously in the late seventies; due to the post-war baby boom of the 1950's reaching reproductive ages. Furthermore, it is doubtful that the age at marriage will continue to rise as in the past or that the incidence of induced abortion will continue to increase. Consequently, future reductions in fertility will be more dependent on the performance of the national family planning program, with less assistance from these non-program factors. This paper will describe various approaches to help to the solution of these current problems. 1. PRACTICE RATE IN FAMILY PLANNING In 1973, the attitude (approval) and knowledge rates were quite high; 94% and 98% respectively. But a large gap exists between that and the actual practice rate, which is only 3695. Two factors must be considered in attempting to close the KAP-gap. The first is to change social norms, which still favor a larger family, increasing the practice rate cannot be done very quickly. The second point to consider is that the family planning program has not yet reached all the eligible women. A 1973 study determineded that a large portion, 3096 in fact, of all eligible women do not want more children, but are not practicing family planning. Thus, future efforts to help close the KAP-gap must focus attention and services on this important large group of potential acceptors. 2. CONTINUATION RATES Dissatisfaction with the loop and pill has resulted in high discontinuation rates. For example, a 1973 survey revealed that within the first six months initial loop acceptance. nearly 50% were dropouts, and that within the first four months of inital pill acceptance. nearly 50% were dropouts. These discontinuation rates have risen over the past few years. The high rate of discontinuance obviously decreases the contraceptive effectiveness. and has resulted in many unwanted births which is directly related to the increase of induced abortions. In the future, the family planning program must emphasize the improved quality of initial and follow-up services. rather than more quantity, in order to insure higher continuation rates and thus more effective contraceptive protection. 3. INDUCED ABORTION As noted earlier. the use of induced abortions has been increase yearly. For example, in 1960, the average number of abortions was 0.6 abortions per women in the 15-44 age range. By 1970. that had increased to 2 abortions per women. In 1966. 13% of all women between 15-44 had experienced at least one abortion. By 1971, that figure jumped to 28%. In 1973 alone, the total number of abortions was 400,000. Besides the ever incre.sing number of induced abortions, another change has that those who use abortions have shifted since 1965 to include- not. only the middle class, but also rural and low-income women. In the future. in response to the demand for abortion services among rural and low-income w~men, the government must provide and support abortion services for these women as a part of the national family planning program. 4. TARGET SYSTIi:M Since 1962, the nationwide target system has been used to set a target for each method, and the target number of acceptors is then apportioned out to various sub-areas according to the number of eligible couples in each area. Because these targets are set without consideration for demographic factors, particular tastes, prejudices, and previous patterns of acceptance in the area, a high discontinuation rate for all methods and a high wastage rate for the oral pill and condom results. In the future. to alleviate these problems of the methodbased target system. an alternative. such as the weighted-credit system, should be adopted on a nation wide basis. In this system. each contraceptive method is. assigned a specific number of points based upon the couple-years of protection (CYP) provided by the method. and no specific targets for each method are given. 5. INCREASE OF STERILIZA.TION TARGET Two special projects. the hospital-based family planning program and the armed forces program, has greatly contributed to the increasing acceptance in female and male sterilization respectively. From January-September 1974, 28,773 sterilizations were performed. During the same time in 1975, 46,894 were performed; a 63% increase. If this trend continues, by the end of 1975. approximately 70,000 sterilizations will have been performed. Sterilization is a much better method than both the loop and pill, in terms of more effective contraceptive protection and the almost zero dropout rate. In the future, the. family planning program should continue to stress the special programs which make more sterilizations possible. In particular, it should seek to add the laparoscope techniques to facilitate female sterilization acceptance rates. 6. INCREASE NUMBER OF PRIVATE ACCEPTORS Among the current family planning users, approximately 1/3 are in the private sector and thus do not- require government subsidy. The number of private acceptors increases with increasing urbanization and economic growth. To speed this process, the government initiated the special hospital based family planning program which is utilized mostly by the private sector. However, in the future, to further hasten the increase of private acceptors, the government should encourage doctors in private practice to provide family planning services, and provide the contraceptive supplies. This way, those do utilize the private medical system will also be able to receive family planning services and pay for it. Another means of increasing the number of private acceptors, IS to greatly expand the commercial outlets for pills and condoms beyond the existing service points of drugstores, hospitals, and health centers. 7. IE&C PROGRAM The current preferred family size is nearly twice as high as needed to achieve a stable poplation. Also, a strong boy preference hinders a small family size as nearly all couples fuel they must have at least one or more sons. The IE&C program must, in the future, strive to emphasize the values of the small family and equality of the sexes. A second problem for the IE&C program to work. with in the: future is the large group of people who approves family planning, want no more children, but do not practice. The IE&C program must work to motivate these people to accept family planning And finally, for those who already practice, an IE&C program in the future must stress continuation of use. The IE&C campaign, to insure highest effectiveness, should be based on a detailed factor analysis of contraceptive discontinuance. In conclusion, Korea faces a serious unfavorable sociodemographic situation- in the future unless the population growth rate can be curtailed. And in the future, the decrease in fertility will depend solely on the family planning program, as the effect of other socio-economic factors has already been maximumally felt. A second serious factor to consider is the increasing number of eligible women due to the 1950's baby boom. Thus, to meet these challenges, the program target must be increased and the program must improve the effectiveness of its current activities and develop new programs.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1995년도 제27회 학술발표회
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• 만화애니메이션 연구
• /
• 통권37호
• /
• pp.361-392
• /
• 2014

회화에 있어서 대상을 사실적으로 표현한 작품들은 19세기 중반 프랑스에서 G.쿠르베가 당시의 아카데미즘 화풍에 반항하면서 사실주의를 주창하였고 이에 동조하는 H.도미에나 F.밀레와 같은 화가들에 의해 사실주의풍의 작품들이 본격적으로 제작되었다. 이후 사실주의는 미술을 비롯해서 문학영역 전반에까지 확대되었고 예술작품과 문학작품에 지대한 영향을 주었다. 만화 또한 회화의 한 형식으로서 그 역사적 맥락을 같이하며 사실주의적인 만화가 당시의 화가나 만화가들에 의해 제작되어지기 시작하였다. 이러한 사실주의 만화(Realism Comics)는 사실에 기초해서 이야기를 다룬 만화로서 내용적으로는 당대의 사회적 현실을 객관적으로 묘사하고 재현시키는 것이 가장 중요한 목적중의 하나였지만 시각적 측면 즉, 대상의 표현 면에서는 반드시 사실적이라고 단정 지어 말할 수는 없었다. 그러던 중 1980년대 이후 미국과 유럽을 중심으로 만화와 소설의 중간 형식을 띈 그래픽 노블이 탄생하게 되었다. 그래픽 노블은 슈퍼 히어로물이 넘쳐나던 미국 만화시장에 문학성과 예술성이 강한 형식과 양식을 갖추고 나타났으며, 그 주요 특징으로는 내용적으로나 시각적으로나 매우 사실적으로 표현되어 있다는 점이다. 이는 마치 그 서사구조나 그림들이 그래픽으로 연출된 소설이나 문학작품을 보는 듯 복잡하고 섬세하며 예술적 작품성까지 지니고 있다. 그래픽 노블에서 보여 지는 사실적 표현의 특징들은 이전의 만화작품과 비교하여 볼 때 상당히 큰 차이점들을 발견할 수 있다. 시대의 유행을 따르기보다는 개성이 강한 작가주의적 그림 스타일의 특색을 보이며, 작품의 완성도가 상당히 높으면서도 독창적이고 실험적인 표현기법이나 방식들로 인해 회화나 일러스트와 같이 예술작품으로 인정받기 시작했다는 점에서 주목할 만하다. 최근 국내에서도 헐리우드 블록버스터 영화가 잇따라 개봉되어 흥행에 성공하면서부터 원작 그래픽 노블에 대한 관심과 수요가 증가되었다. 따라서 많은 원작 그래픽 노블이 번역되어 판매되기 시작하였고 이러한 세계적인 흐름과 유행에 발맞추어 한국의 일부 작가들이 그래픽 노블류의 작품들을 제작하기 시작하였다. 그러나 그래픽 노블을 표방하며 제작되어진 국내 작품들을 살펴보면 그 형식과 정통성 측면에서 여러 가지 견해가 있다. 이러한 시점에서 본 연구는 한국적 그래픽 노블의 대표적 작품이라고 할 수 있는 권가야의 <남한산성>에 초점을 맞추었으며, 특히, 대상의 사실적 표현이라는 시각적 측면에 중점을 두고 그 특징들과 유사성 등을 분석해보고자 한다. 본 연구를 통해 국내 그래픽 노블에 대한 정체성과 현주소를 되짚어보고 미국이나 유럽 그리고 일본의 그래픽 노블과는 차별화된 우리만의 독창적인 소재를 개발, 활용함으로써 한국적 그래픽 노블이 경쟁력을 갖춘 만화의 한 장르로 더욱 발전할 수 있도록 모색하는 계기가 되었으면 한다. 더 나아가 침체되어 있는 국내 만화시장에 새로운 활력소가 되기를 희망한다.