• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1304-1310
• /
• 2015

In remote islands, due to expense of existing generation systems, installation of photovoltaic cells (PVs) and wind turbines has a chance of reducing generation costs. However, in island power systems, even short-term power fluctuations change the frequency of grids because of their small inertia constant. In order to compensate power fluctuations, the authors proposed the power consumption control of pumps which send water to tanks. The power control doesn’t affect water users’ convenience as long as tanks hold water. Based on experimental characteristics of a pump system, this paper shows methods to determine reference power consumption of the system with compensation for short-term PV fluctuations while satisfying water demand. One method uses a PI controller and the other method calculates reference power consumption from water flow reference. Simulations with a PV and a pump system are carried out to find optimum parameters and to compare the methods. Results show that both PI control method and water flow calculation method are useful for satisfying the water demand constraint. The water demand constraint has a little impact to suppression of the short-term power fluctuation in this condition.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1707_1708
• /
• 2009

Unit master control(UMC)는 발전소의 요구 부하신호를 설정하는 최상위의 제어레벨이며 UMC의 설정값은 자동급전 지령신호(Automatic Dispatch System : ADS) 또는 운전원이 설정하는 값에 따라 보일러 및 터빈 Master에 Unit 요구 신호를 출력하여 하위제어 레벨인 공기, 연료, 급수 등을 조절할 수 있는 기기에 Unit 부하 요구 신호(Unit Load Demand : ULD)에 따라 제어 되도록 하는 방법으로서, Unit 목표부하 설정, Unit 목표부하 상/하한 제한, 목표부하 변화율 제한, 주파수 보정, Runback/Rundown/ Runup, 보일러 및 터빈 Demand 신호생성의 기능을 가지고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.97.1-97
• /
• 2001

One of the main problems to constitute control method on biologically oriented wastewater purification processes, e.g. activated sludge process, sequential batch reactor, rotating bio-disk contactor, etc. is that it is hard to control the target component directly. For instance, while biochemical oxygen demand, suspended solids, and chemical oxygen demand are the key components to check the process performance, one may not control them directly since they are the results of microbial activities related to numerous physiochemical factors. Therefore controllers for bioprocess should be designed to make favorable condition for microorganisms´ living, e.g. dissolved oxygen level favorable, mixed liquor suspended solids concentration suitable ...

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.285-287
• /
• 2008

This paper represents the electric power load leveling effect of the Light Control System(LCS). The lighting of typical mid-large commercial buildings is the major factor of daytime electric power consumption. Since the national peak power demand occurs in between 11:00 and 16:00, the dimming control of light can contribute the decrease of the power demand We will discuss the load leveling effect of dimming control with LCS.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1116-1120
• /
• 2014

With the shift of the energy paradigm from supply side management to demand side management, demand resource management and demand response plays an important role in the energy industry. As a consequency, a lot of researches have been done to provide a suitable demand response system. However, most of the demand response systems are based on the propriety products that cannot be modified. In this paper, we are proposing an automated demand response system using an EnerNOC provided open source code. We implemented the demand response server (VTN) and demand response client (VEN), and validated the OpenADR2.0 compliances using the open source code. We also used an Arduino microcontoller to demonstrate the communication schemes to control various devices.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.95-99
• /
• 2013

The maximum power analysis simulator took advantage of the facilities and power consumption reduction simulator test scenario development and testing of improvement in the scenario. As a maximum demand power controller, Maximum power analysis simulator performs control and disperasion of maximum demand power by calculating base power, load forecast, and present power which are based on signal of watt-hour meter to keep the electricity under the target. In addition, various algorithms to select appropriate control methode on each of the light installations through the peak demand power is configured to management. The simulation shows the success of control power for the specified target controlled by five sequential lighting installations.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.1
• /
• pp.39-46
• /
• 2003

Objectives : To investigate the availability and demand for overall cancer-related information, and to establish a basic plan for the construction of a cancer database and information system based on the research results from Korea. Methods : Postal and telephone surveys were carried out, between August 2001 and November 2001, of 323 affiliated faculty professors from medical universities and colleges in Korea. The data were analyzed with descriptive statistical methods, with regard to the present status and demand for health and cancer-related information. Results : Most (over 80%) subjects studied utilized the health-related information provided on Internet website from foreign countries, such as Medline, but similar comprehensive information system lacked in Korea. The construction of a cancer-related database of domestic research results was revealed to be in a great demand. Information on registration and statistics (52.8%), study results (48.5%) and study resources (37.4%) were the major ingredients required in the database. In constructing a database of the cancer-related research results, a full-text service, continuous updating of data, and the development of standardized user-friendly searching tool were regarded as the necessary components. The formulation of an information sharing system, regarding cancer-related clinical trials, was investigated as being quite feasible. Conclusion : This study demonstrated the great importance of cancer information systems, and much demand for an available cancer-related database based on Korean research results.

• Structural Engineering and Mechanics
• /
• v.39 no.1
• /
• pp.147-168
• /
• 2011

To ensure safety and long term performance, structural control has rapidly matured over the past decade into a viable means of limiting structural responses to strong winds and earthquakes. Nonlinear response history analysis requires rigorous procedure to compute seismic demands. Therefore the simplified nonlinear analysis procedures are useful to determine performance of the structure. In this investigation, application of improved capacity demand diagram method in the control of structural system is presented for the first time. Developed pole assignment method (DPAM) in structural systems control is introduced. Genetic algorithm (GA) is employed as an optimization tool for minimizing a target function that defines values of coefficient matrices providing the placement of actuators and optimal control forces. The ground acceleration is modified under induced control forces. Due to this, performance of structure based on improved nonlinear demand diagram is selected to threshold of nonlinear behavior of structure. With small energy consumption characteristics, semi-active devices are especially attractive solutions for limiting earthquake effects. To illustrate the efficiency of DPAM, a 30-story steel moment frame structure employing the semi-active control devices is applied. In comparison to the widely used linear quadratic regulation (LQR), the DPAM controller was shown to be just as effective and better in the reduction of structural responses during large earthquakes.

• Journal of Families and Better Life
• /
• v.25 no.5
• /
• pp.127-141
• /
• 2007

This study examined the differences of elderly workers' psychological well-being according to gender and explored the variables which account for their psychological well-being. Paid laborers aged 60 or older(eight-five men and nine-eight females) were interviewed. The psychological well-being of male workers was higher than that of the female workers. The control level of activity and family support were the variables that explained the psychological well-being of male paid workers. The higher the control level of activity was, and the more support given from family, the higher the psychological well-being scores they showed. Educational level, demand level of activity, and material reward determined the psychological well-being of female workers. The higher their educational level was, the lower the demand level of activity was, and the fewer rewards they received from paid work, the higher their psychological well-being was.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.833-836
• /
• 2012

Demand Controller is a load control device that monitor the current power consumption and calculate the forecast power to not exceed the power set by consumer. Accurate demand forecasting is important because of controlling the load use the way that sound a warning and then blocking the load when if forecasted demand exceed the power set by consumer. When if consumer with fluctuating power consumption use the existing forecasting method, management of demand control has the disadvantage of not stable. In this paper, examine the existing forecasting method and the exponential smoothing method, and then propose the forecasting method using Kalman Filter algorithm.