• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.981-986
• /
• 1992

In order to implement the digital PID control algorithm, it is necessary to consider the effect of the finite word length(FWL). In this paper, we show the FWL effect in the digital PID controllers. The conception analyse the effects of the signal quantization error in the digital PID algorithm and the coefficient wordlength determined from performance criteria with the statistical wordlength concept. Throughout this paper, it is dealt with the type of controller structure based delta operator the delta operator has such advantages are superior rounfoff noise perfoff noise performance, more accurate coefficient repersentation, and less sensitive control law.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.135-139
• /
• 2008

In this paper, tunable SC(switched capacitor) 2nd order bandpass $\Sigma-\Delta$(Sigma-Delta) modulator with novel architecture that can adjust the IF band center frequency by one coefficient value is proposed for data conversion in the IF(Intermediate Frequency) band. Its architecture can optionally adjust all the 2nd order noise transfer function in comparison with the conventional architecture. In order to adjust the center frequency, the conventional architecture needs the two variable coefficient values, basic clock and eight clocks. On the other hand, the proposed architecture can adjust the center frequency by one variable coefficient value and basic clock only.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.1945-1962
• /
• 2015

This paper is mainly concerned with the formation of delta standing wave for the scalar conservation law with a linear flux function involving discontinuous coefficients by using the self-similar viscosity vanishing method. More precisely, we use the self-similar viscosity to smooth out the discontinuous coefficient such that the existence of approximate viscous solutions to the delta standing wave for the Riemann problem is established and then the convergence to the delta standing wave solution is also obtained when the viscosity parameter tends to zero. In addition, the Riemann problem is also solved with the standard method and the instability of Riemann solutions with respect to the specific small perturbation of initial data is pointed out in some particular situations.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.145-154
• /
• 2003

In this study, the variation in excess pore pressure during dissipation is estimated by using successive cavity expansion theory and finite difference technique based on axisymmetric uncoupled linear consolidation theory with separate consideration of magnitude and initial distribution $\Delta{u}_{oct}$induced by changes of octahedral normal stress, and $\Delta{u}_{shear}$ induced by changes of octahedral shear stress. The coefficient of consolidation is also estimated by trial and error procedure until the predicted dissipation curve matches the measured curve at a typical degree of dissipation. The proposed method is applied to the results of miniature piezocone tests at Louisiana State University calibration chamber system. Based on the results of interpretation and the comparison with experimental measurements and those from other solutions, the prediction dissipation curves show a good match with those measured during dissipation tests and the values of coefficient of consolidation estimated by proposed method are more close to the range of laboratory measurements than those of other theories.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.446-450
• /
• 2011

Tunable SC(Switched Capacitor) bandpass ${\Sigma}-{\Delta}$(Sigma-Delta) modulator used in wireless system receiver occurs a signal attenuation according to tuning of center frequency in signal bandwidth. In this paper, tunable bandpass 4th order SC bandpass ${\Sigma}-{\Delta}$ modulator with novel structure is proposed for rejection of signal attenuation in signal bandwidth. The existing structure uses a ten variable coefficient values for rejection of signal reduction in the modulator. But the proposed structure only use a two variable coefficient values for rejection of signal attenuation in the modulator. Also, an adder and comparator is replaced with a comparator having 4 inputs in the modulator. Therefore, the existing structure has one more OP-AMP. The purposed modulator was designed in $0.18\;{\mu}m$ CMOS technology. The resolution of the modulator within 310 kHz bandwidth and 40 MHz sampling frequency under 6.67 MHz, 10 MHz and 13.33 MHz intermediate frequency are over 10 bit.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.31-35
• /
• 2009

In this paper, tunable 4th order SC(switched capacitor) bandpass ${\sigma}-{\Delta}$(Sigma-Delta) modulator with advanced architecture that can adjust the IF by two coefficient values is proposed for data conversion in the wireless communication. Its architecture can optionally adjust all the 4th order noise transfer function in comparison with the conventional architecture. In order to adjust the IF, the conventional architecture needs the four variable coefficients values, basic clocks and eight clocks. On the other hand, the proposed architecture can adjust the IF by two variable coefficient values and basic clocks only.

• Journal of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.238-244
• /
• 1963

Linear relationships between thermodynamic parameters, ,${\Delta}{\Delta}H^{\neq}=a{\sigma}+b{\Delta}{\Delta}S^{\neq}$, and $\Delta{\Delta}F^\neq=a\sigma+(b-T)\Delta{\Delta}S^\neq$, which were derived in the previous report have been tested with 57 reactions from literature. Linearities of plots $\Delta{\Delta}H^\neq-a\sigma$ vs. $\Delta{\Delta}S^\neq$ were generally good and the average correlation coefficient was 0.983 and the average of standard deviations from regression lines was 0.11. For 15 out of 57 reactions, Hammett plots were unsatisfactory and most of the reaction did not satisfy the Leffler equation. The general applicability of the new equations has been confirmed by the analysis of each reaction for which existing equations failed to correlate.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.566-571
• /
• 2008

Frictional sounds of 8 vapor permeable water repellent fabrics by sound generator were recorded and analyzed through FFT fast Fourier transform analysis. The frictional Sounds were quantified by calculating level pressure of total sound(LPT), the level range(${\Delta}L$) and the frequency difference(${\Delta}f$). Mechanical properties were measured by KES-FB. LPT values of specimens finished wet coating were higher than those of other kinds of finishing. ${\Delta}L$ values of specimens laminated were highest. Absolute values of ${\Delta}f$ were high in the cire finished and laminated specimens. Values for bending rigidity, shear stiffness and energy required for the compression of coated specimens increased compared with the cire finished and laminated specimens. Laminated specimens had high values of frictional coefficient and low values of surface roughness. Relationship between frictional sounds and mechanical properties analysed by use of correlation coefficients and stepwise regression. LPT showed significant correlation with elongation, tensile energy, geometrical roughness, weight and thickness. ${\Delta}L$ was highly correlated with tensile linearity, frictional coefficient, and ${\Delta}f$ with tensile linearity, weight and thickness. LPT were revealed to be explained by elongation and weight. ${\Delta}L$were predicted by tensile linearity, and ${\Delta}f$ by tensile linearity and thickness.

• Journal of the Korean Chemical Society
• /
• v.41 no.8
• /
• pp.385-391
• /
• 1997

Diffusion Coefficient$(D_0)$ and electrode reaction rate Constant$(K_0)$ of Co$(dimethyl bipyridine)_3(ClO_4)_2$ were determined by cyclic voltammetry and chronoamperometry. It was also investigated that the effects of solvent, concentration, and scan rate, etc. on the diffusion coefficient and the temperature effect on the rate constant. The peak currents and diffusion coefficients were dcreased as increasing the viscosity of solvent. Diffusion coefficient was $5.54{\times}10^{-6 }cm^2/sec$ and the reaction rate constant was $2.39{\times}10^{-3 }/s$ at 25$^{\circ}C$. The thermodynamic parameters such as ${\Delta}G^{\neq},\;{\Delta}H^{\neq},\;and\;{\Delta}S$ were calculated from plotting the reaction rate constants versus the solution temperatures. This compound was shown the catalytic effect on the oxygen reduction that the reduction peak current of oxygen was greatly enhanced and the peak potential was shifted to +0.2 volt.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.5
• /
• pp.1531-1538
• /
• 2013

In the present investigation, the author introduces two interesting subclasses of normalized meromorphic univalent functions $w=f(z)$ defined on $\tilde{\Delta}:=\{z{\in}\mathbb{C}:1<{\mid}z{\mid}<{\infty}\}$ whose inverse $f^{-1}(w)$ is also univalent meromorphic in $\tilde{\Delta}$. Estimates for the initial coefficients are obtained for the functions in these new subclasses.