• 제목/요약/키워드: Delayed-Retardation

검색결과 79건 처리시간 0.028초

강의 피로균열지연거동에 미치는 과대하중의 영향과 통계적 변동에 관한 연구 (Influence of overload on the fatigue crack growth retardation and the statistical variation)

  • 김선진;남기우;김종훈;이창용;박은희;서상하
    • 한국해양공학회지
    • /
    • 제11권3호
    • /
    • pp.76-88
    • /
    • 1997
  • Constant .DELTA.K fatigue crack growth rate experiments were performed by applying an intermediate single and multiple overload for structural steel, SM45C. The purpose of the present study is to investigate the influence of multiple overloads at various stress intensity factor ranges and the effect of statistical variability of crack retardation behavior. The normalized delayed load cycle, delayed crack length and the minimum crack growth rate are increased with increasing baseline stress intensity factor range when the overload ratio and the number of overload application were constant. The crack retardation under low baseline stress intensity factor range increases by increasing the number of overload application, but the minimum crack growth rate decreases by increasing the number of overload application. A strong linear correlation exists between the minimum crack growth rate and the number of overload applications. And, it was observed that the variability in the crack growth retardation behavior are presented, the probability distribution functions of delayed load cycle, delayed crack length and crack growth life are 2-parameter Weibull. The coefficient of variation of delayed load cycle and delayed crack length for the number of 10 overload applications data are 14.8 and 9.2%, respectively.

  • PDF

단일과대하중에 의한 피로균열추전의 지대지연현상에 관한 연구 (A Study on the Delayed-Retardation of Fatigue Crack Growth Following Single Peak Overload)

  • 오세욱;강상훈
    • 대한기계학회논문집
    • /
    • 제14권5호
    • /
    • pp.1186-1192
    • /
    • 1990
  • 본 연구에서는 이와 같은 과대인장하중의 제하과정중에 발생하는 과대압축소 성역이 과대하중에 의한 피로균열의 진전지연에 미치는 영향을 중심으로 하여, 각 소 성역 치수를 매개변수로 하는 해석적 방법을 통하여 가속지연모델을 제안하고, 이를 2024-T3 Al 합금을 이용한 단일과대하중에 의한 지연시험결과 및 Wheeler 나 Willenb- org 등의 기존의 지연모델과 비교 고찰하고자 한다.

단일과대하중하에서 피로균열진전지연거동 및 지연수명의 확률론적 해석 (A Stochastic Analysis for Crack Growth Retardation Behavior and Prediction of Retardation Cycle Under Single Overload)

  • 심동석;김정규
    • 대한기계학회논문집A
    • /
    • 제23권7호
    • /
    • pp.1164-1172
    • /
    • 1999
  • In this study, to investigate the fatigue crack retardation behavior and the variability of retardation cycles, fatigue crack growth tests were conducted on 7075-T6 aluminum alloy under single tensile overload. A retardation coefficient, D was introduced to describe fatigue crack retardation behavior and a random variable, Z to describe the variability of fatigue crack growth. The retardation coefficient was separately formulated according to retardation behavior which is composed of delayed retardation part and retardation part. The random variable, Z was evaluated from experimental data which was obtained from fatigue crack growth tests under constant amplitude load. Using these variables, a probabilistic model was developed on the basis of the modified Forman's equation, and retardation behavior and cycles were predicted under certain overload condition. The predicted retardation curve well agrees with the trend of experimental crack retardation behavior. And this model well predicts the scatter of experimental retardation cycles.

단일 과대하중에 의한 균열지연거동에 관한 연구 (A Study on Crack Retardation Behavior by Single Overload)

  • 송삼홍;권윤기
    • 대한기계학회논문집
    • /
    • 제19권2호
    • /
    • pp.451-462
    • /
    • 1995
  • Single overload tests performed to examine the crack retardation behavior for the specimen thickness and overload ratios. Delayed crack length was tend to increase in small thickness and big overload ratio but was difference between delayed crack length and plastic zone size that expected in specimen thickness. So retardation behavior that estimated in plastic zone size, was not sufficient. Crack tip branching and striation distribution, secondary mechanisms that effected in retardation behavior, was examined by experiment and finite element analysis. Crack tip branching was affected by micro structure, and appeared the more complicatedly according to increasing damage by overload and decreasing crack driving force in base line stress level. And crack tip branching the branching angle decreased crack driving force in the crack tip. And a characteristic of the fractography on retardation zone was that striation distribution did not appear due to decreased crack driving force.

오지(五遲) 오연(五軟) 오경(五硬) 유아(幼兒)의 임상면접지 분석 (Analysis of Clinical Questionnaire on the Five Retardation, Five Stiffness and Five Limpness)

  • 박재형;윤영주;박재현;백은경
    • 대한한방소아과학회지
    • /
    • 제24권2호
    • /
    • pp.1-12
    • /
    • 2010
  • Objectives Taking detailed patient history helps earlier diagnosis and treatment of developmental disability. In this study we analyzed the clinical questionnaire to find out the clinical characteristics of those with five-retardation, five-limpness, or five-stiffness. Methods The data was collected from 484 children under the age of six who have visited H oriental medicine clinic for developmental delay. The clinical questionnaire was filled out by their parents and the data was analyzed statistically. Results 436 children showed symptoms of five-retardation, 90 children suffered from five-stiffness, 54 children showed five-limpness and 7 children suffered from five-stiffness and five-limpness complex. Generally, boys had higher chance to show disease symptoms than the girls (2.32:1) and 40 children (8.26%) reported family history of developmental disability. Cerebral palsy ranks the most common familial disease, followed by developmental delay, mental retardation, autistic disorder and language disorder. Among the children we have studied, 285 children (63.19%) showed delayed unassisted walk while 192 children (42.57%) had language disorder. Also, 138 children (28.51%) had both walk and language disorders. The children in this study also showed delayed toilet training and half of them had little stranger anxiety when they were infants. It was also found that 120 children (24.79%) experienced epilepsy. This study reaffirmed that low birth weight, premature birth, and suffocation are major risks causing neurological damage. Conclusions They had history which including family history, problems at birth, epilepsy, face recognition, muscle tone disorder, delayed walking without assistance, language ability, and toilet training.

Overexpression of a delayed early gene hlg1 of temperate mycobacteriophage L1 is lethal to both M. smegmatis and E. coli

  • Chattoraj, Partho;Ganguly, Tridib;Nandy, Ranjan Kumar;Sau, Subrata
    • BMB Reports
    • /
    • 제41권5호
    • /
    • pp.363-368
    • /
    • 2008
  • Two genes of temperate mycobacteriophage L5, namely, gp63 and gp64, were hypothesized to be toxic to M. smegmatis. An identical L5 gp64 ortholog (designated hlg1) was cloned from homoimmune mycobacteriophage L1 and characterized at length here. As expected, hlg1 affected the growth of M. smegmatis when overexpressed from a resident plasmid. HLG1 (the protein encoded by hlg1) in fact caused growth retardation of M. smegmatis and the region encompassing its 57-114 C-terminal amino acid residues was found indispensable for its growthretardation activity. Both nucleic acid and protein biosynthesis were severely impaired in M. smegmatis expressing HLG1. Interestingly, HLG1 also affected E. coli almost similarly. This putative delayed early lipoprotein did not participate in the lytic growth of L1.

과대 하중작용 시 균열성장 지연 거동에 대한 파괴역학적 정리 (Fracture Mechanic's Approach on Retardation Behaviors under Overloading)

  • 강용구;박준영
    • 한국기계가공학회지
    • /
    • 제11권5호
    • /
    • pp.13-20
    • /
    • 2012
  • In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a non-liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

과대하중작용 시 균열성장 지연거동에 대한 파괴역학적 정리 (Fracture Mechanic's Approach on Retardation Behaviors under Overloading)

  • 강용구;박준영
    • 한국기계가공학회지
    • /
    • 제11권4호
    • /
    • pp.82-89
    • /
    • 2012
  • In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

단일 과대 하중에 의한 균열 성장 지연 거동 예측 (Prediction of Crack Growth Retardation Behavior by Single Overload)

  • 송삼흥;최진호;김기석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.928-932
    • /
    • 1996
  • Single overload fatigue tests with overload sizes ranging from 50% and 100% have been performed to investing ate the fatigue crack growth retardation behavior. A modified and experimental method of Willenborg's model for prediction of crack growth retardation behavior has been developed, based on evaluations of equivalent plastic zone size (EPZS) changing its size along the overload plastic zone boundary. The minimum crack growth rates of each overload size are linearly decreased with overload size increasing, but fatigue lives extended by single overload are increasing much more unlike the crack growth rates. Comparisons of crack growth behavior predicted by EPZS model and Willenborg model have shown that the EPZS model accounts for overload effects better than Willenborg model. These effects include delayed retardation, large retardation region, minimum crack growth rate, and the increase rate of crack growth rate in the region crack growth rate recovered.

  • PDF

단일 과대하중에의한 크랙지연 거동에 관한 연구

  • 송삼홍;권윤기
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 춘계학술대회 논문집
    • /
    • pp.328-332
    • /
    • 1993
  • Single overload tests are carried out for SS41. Specimens are used hollow type and solid type that stress condition prevail plane stress and plane strain at surface crack. According to the crack initiation and propagation period, single overload applies to three regime and overload ratios change into 1.5, 2.0. Crack retardation zones at initation range aren't different in both specimens respectively, however at propagation range come into large scale in hollow specimen. Delayed load cycles come into large scale in solid type. And the more the overload ratio increase, the larger the retardation zone increase but the magnitude doesn't exactly equal to the expected from the overload ratio.