• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.76-88
• /
• 1997

Constant .DELTA.K fatigue crack growth rate experiments were performed by applying an intermediate single and multiple overload for structural steel, SM45C. The purpose of the present study is to investigate the influence of multiple overloads at various stress intensity factor ranges and the effect of statistical variability of crack retardation behavior. The normalized delayed load cycle, delayed crack length and the minimum crack growth rate are increased with increasing baseline stress intensity factor range when the overload ratio and the number of overload application were constant. The crack retardation under low baseline stress intensity factor range increases by increasing the number of overload application, but the minimum crack growth rate decreases by increasing the number of overload application. A strong linear correlation exists between the minimum crack growth rate and the number of overload applications. And, it was observed that the variability in the crack growth retardation behavior are presented, the probability distribution functions of delayed load cycle, delayed crack length and crack growth life are 2-parameter Weibull. The coefficient of variation of delayed load cycle and delayed crack length for the number of 10 overload applications data are 14.8 and 9.2%, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1186-1192
• /
• 1990

It is well known that the fatigue crack growth retardation following overloads can be estimated reasonably well by the models of Wheeler and Willenborg. These models, however, can not explain the delayed-retardation revealed by every experimental result. This means that they necessarily have some qualitative defects in themselves despite of a fair approximation of quantity. In fact, they did not take into account the effects of the compressive portion of the overload cycle such as the change of reversed plastic zone size. The present study is focused on the acceleration effect in the reversed plastic zone in order to analyze qualitatively delayed-retardation phenomenon following single peak overload on the fatigue crack growth behavior using 2024-T3 aluminum alloy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1164-1172
• /
• 1999

In this study, to investigate the fatigue crack retardation behavior and the variability of retardation cycles, fatigue crack growth tests were conducted on 7075-T6 aluminum alloy under single tensile overload. A retardation coefficient, D was introduced to describe fatigue crack retardation behavior and a random variable, Z to describe the variability of fatigue crack growth. The retardation coefficient was separately formulated according to retardation behavior which is composed of delayed retardation part and retardation part. The random variable, Z was evaluated from experimental data which was obtained from fatigue crack growth tests under constant amplitude load. Using these variables, a probabilistic model was developed on the basis of the modified Forman's equation, and retardation behavior and cycles were predicted under certain overload condition. The predicted retardation curve well agrees with the trend of experimental crack retardation behavior. And this model well predicts the scatter of experimental retardation cycles.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.451-462
• /
• 1995

Single overload tests performed to examine the crack retardation behavior for the specimen thickness and overload ratios. Delayed crack length was tend to increase in small thickness and big overload ratio but was difference between delayed crack length and plastic zone size that expected in specimen thickness. So retardation behavior that estimated in plastic zone size, was not sufficient. Crack tip branching and striation distribution, secondary mechanisms that effected in retardation behavior, was examined by experiment and finite element analysis. Crack tip branching was affected by micro structure, and appeared the more complicatedly according to increasing damage by overload and decreasing crack driving force in base line stress level. And crack tip branching the branching angle decreased crack driving force in the crack tip. And a characteristic of the fractography on retardation zone was that striation distribution did not appear due to decreased crack driving force.

• The Journal of Pediatrics of Korean Medicine
• /
• v.24 no.2
• /
• pp.1-12
• /
• 2010

Objectives Taking detailed patient history helps earlier diagnosis and treatment of developmental disability. In this study we analyzed the clinical questionnaire to find out the clinical characteristics of those with five-retardation, five-limpness, or five-stiffness. Methods The data was collected from 484 children under the age of six who have visited H oriental medicine clinic for developmental delay. The clinical questionnaire was filled out by their parents and the data was analyzed statistically. Results 436 children showed symptoms of five-retardation, 90 children suffered from five-stiffness, 54 children showed five-limpness and 7 children suffered from five-stiffness and five-limpness complex. Generally, boys had higher chance to show disease symptoms than the girls (2.32:1) and 40 children (8.26%) reported family history of developmental disability. Cerebral palsy ranks the most common familial disease, followed by developmental delay, mental retardation, autistic disorder and language disorder. Among the children we have studied, 285 children (63.19%) showed delayed unassisted walk while 192 children (42.57%) had language disorder. Also, 138 children (28.51%) had both walk and language disorders. The children in this study also showed delayed toilet training and half of them had little stranger anxiety when they were infants. It was also found that 120 children (24.79%) experienced epilepsy. This study reaffirmed that low birth weight, premature birth, and suffocation are major risks causing neurological damage. Conclusions They had history which including family history, problems at birth, epilepsy, face recognition, muscle tone disorder, delayed walking without assistance, language ability, and toilet training.

• BMB Reports
• /
• v.41 no.5
• /
• pp.363-368
• /
• 2008

Two genes of temperate mycobacteriophage L5, namely, gp63 and gp64, were hypothesized to be toxic to M. smegmatis. An identical L5 gp64 ortholog (designated hlg1) was cloned from homoimmune mycobacteriophage L1 and characterized at length here. As expected, hlg1 affected the growth of M. smegmatis when overexpressed from a resident plasmid. HLG1 (the protein encoded by hlg1) in fact caused growth retardation of M. smegmatis and the region encompassing its 57-114 C-terminal amino acid residues was found indispensable for its growthretardation activity. Both nucleic acid and protein biosynthesis were severely impaired in M. smegmatis expressing HLG1. Interestingly, HLG1 also affected E. coli almost similarly. This putative delayed early lipoprotein did not participate in the lytic growth of L1.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.13-20
• /
• 2012

In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a non-liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.82-89
• /
• 2012

In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.928-932
• /
• 1996

Single overload fatigue tests with overload sizes ranging from 50% and 100% have been performed to investing ate the fatigue crack growth retardation behavior. A modified and experimental method of Willenborg's model for prediction of crack growth retardation behavior has been developed, based on evaluations of equivalent plastic zone size (EPZS) changing its size along the overload plastic zone boundary. The minimum crack growth rates of each overload size are linearly decreased with overload size increasing, but fatigue lives extended by single overload are increasing much more unlike the crack growth rates. Comparisons of crack growth behavior predicted by EPZS model and Willenborg model have shown that the EPZS model accounts for overload effects better than Willenborg model. These effects include delayed retardation, large retardation region, minimum crack growth rate, and the increase rate of crack growth rate in the region crack growth rate recovered.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.328-332
• /
• 1993

Single overload tests are carried out for SS41. Specimens are used hollow type and solid type that stress condition prevail plane stress and plane strain at surface crack. According to the crack initiation and propagation period, single overload applies to three regime and overload ratios change into 1.5, 2.0. Crack retardation zones at initation range aren't different in both specimens respectively, however at propagation range come into large scale in hollow specimen. Delayed load cycles come into large scale in solid type. And the more the overload ratio increase, the larger the retardation zone increase but the magnitude doesn't exactly equal to the expected from the overload ratio.