• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.1-7
• /
• 2011

In this paper, CDD(Cyclic Delay Diversity)-DF(Decode-and-Forward)-Relay scheme is proposed for MC-CDMA(Multicarrier-Code Division Multiple Access) systems over multipath Rayleigh fading channels. The advantages of general DF schemes come at the expense of the spectral efficiency since the source and all the relays must transmit on orthogonal channels. In order to mitigate this disadvantage of general DF schemes, we have applied CDD techniques to each relays so that all the relays can transmit on single channel. It means that all R-D link channels can be considered as a single channel which is widely delay spread. Namely, it causes the increasing the number of multipath so that the frequency diversity gain can be achieved in MC-CDMA systems. By simulations, we have compared proposed one with general DF scheme. Therefore, it is confirmed that the proposed one can be a possible solution to achieve cooperative diversity gain without a reduction of spectral efficiency.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.216-222
• /
• 2004

Frequency selective fading is a limiting factor for transmission rate and performance in high-speed multimedia communications. In this paper, we propose a turbo coded adaptive quadrature amplitude modulation (QAM) system for efficient high-speed transmission. By making use of a user-friendly simulation platform of SPW, the proposed turbo coded adaptive QAM system(TuAQAM) is developed and its performance is evaluated in terms of throughput and BER performance. Two channel models having delay spreads of 700ns and 1400ns are created for the simulations. It is shown that the proposed TuAQAM system provides a performance improvement of approximately 3dB and improved throughput for the channel model whose delay spread is 700ns. Similarly, a performance improvement is also achieved for the channel model whose delay spread is 1400ns.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.7
• /
• pp.441-448
• /
• 2012

Spread spectrum provides the minimized inter-symbol interference, the low probability of intercept and the multiple access capability. This paper presents a direct sequence spread spectrum with carrier/timing recovery and equalizer which compensates the delay spread caused by multipath transmission. When the sea trials were performed in Korean East Sea, the bit error rates of QPSK and direct sequence spread spectrum are $1.46{\times}10^{-2}$ and $5.17{\times}10^{-4}$ at 3 km source-receiver range, respectively.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.953-960
• /
• 2009

In the major operation section of urban railway, there has been occurred habitual delay, and delay propagation and spread to consecutive trains. Therefore, this delay cause the increase of operation time and irregular operation, also the increase of crowd and inconvenience to passengers. The railway operation plan is a promise to passengers and must have reliability. In the case of high frequency urban operation, dwell time have considerable influence on operational headway, so it is very important to efficiently plan and control the dwell time at stations. In this paper, the survey of the research on dwell time for urban railways is presented. The practical estimation model for minimum required dwell time, and the numerical example and validity are proposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.55-61
• /
• 2007

In this paper, we represent the maximum detection probability formulas of symbol synchronization timing at each received delay signal in multipath channel delay profile in the multiplied correlation and difference type correlated symbol synchronization timing detection method. The computer simulation results show that the correlation symbol timing detection method have maximum detection probability at the lead of received delay signal of highest amplitude, but the difference type of correlation symbol timing detection method always have maximum detection probability at the lead of first received delay signal in the multipath channel models. Using this results, we show the BER characteristics difference between the IEEE802.11a OFDM signals which is obtained in case of the symbol synchronization timing is taken at zero error(perfect) timing position and at -1 sample error symbol timing position from perfect timing position in the multipath channel models regardless the length of channel delay spread.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1279-1283
• /
• 2008

Satellite Digital Multimedia Broadcasting(SDMB) needs Gap Fillers(GFs) to cover the non-service areas. However, SDMB mobile phones which are not located in GFs service area receive signals directly from the satellite because it is impossible to cover all SDMB service with GFs. Therefore, there is a border between the GFs service coverage and the satellite service coverage and it causes a time delay in signals which are from the GFs or the satellite. The time delay is the reason why SDMB service deteriorates. In this paper, I show how to reduce the deterioration of SDMB service in the border area between the GFs and the satellite adding the time delay to the satellite signal and the GFs signal. I think that this method is helpful in reducing the deterioration, especially in the early stages of SDMB service, which the GFs are not spread all over the nation yet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.941-950
• /
• 1991

channel is severely degraded by multipath delay time spread. In this paper. We propose a simple multipath delay time detection method, which has a merit of in serviceable, yet simple H/W realizability for $\pi/4$ shift QPSK by detecting cross channel interference. A $\pi/4$ shift QPSK signal originally has quadrature channel(Q-ch) component. Thus in order to measure CCI between in-phase channel(I-ch) and quadrature channel(Q-ch), which closely related to multipath delay time, Frequency doubling scheme(frequency doubler) and differential detector is proposed, which makes $\pi/4$ shift QPSK signal look like BPSK and also makes it possible for CCI to be detected at I-ch detector output. To get an information from time varying I-ch output signal under the multipath lading environment, a method for obtaining the mean of the absolute value$(V_{MABS}(t))$ and another one for obtaining the root mean square value$(V_{RMS}(t))$ of CCI are proposed. Furthermore, a relationship between delay spread and CCI is also analyzed. In order to confirm theoretical results, computer simulation has been carried out under the quasi-static and Reyleigh distributed two ray multipath fading environments. A fairly good result was obtained. However it was also shown that this method is sensitive to bandwidth restriction to some extent. In addition, some idea for a simple hardware realization for the frequency doubler are given.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.53-56
• /
• 2000

In MC-CDMA systems effects of delay spread of the channel are reduced with increased symbol duration by simultaneously transmitting data symbols on the parallel subcarriers. However, the increased symbol duration causes the system to be more vulnerable to time selective fading. In other words, although MC-CDMA systems are robust against frequency selective fading in a multipath environment, they are sensitive to Doppler spread and hence inter-carrier interference is increased. In this paper, we investigate the effects of time selective fading characteristics of the mobile channel from the viewpoint of desired signal power to inter-carrier interference power ratio at the combiner output of the MC-CDMA receiver.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.10-17
• /
• 1996

The performance of tau-dither loop (TDL) is evaluated for a direct-sequence spread-spectrum system in a multipath fading channel. The multipath fading channel is modeled as a two-ray rayleight fading channel. The code tracking perfomrance of TDL is analyzed in terms of tracking jitter and mean-tiem-to-lose-lick (MTLL). The tracking jitter performance is degraded while MTLL perfomrance is improved with increasing discriminator offset and decreasing power ratio of main to second paths. It is shown that for a large bit SNR, the effect of multipath fading becomes more significant. And it is also shown that tracking jitter and MTLL performance is less sensitive to delay spacing and discriminator offset for a small bit SNR than for a large bit SNR.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.858-868
• /
• 2012

In this paper, stochastic models for the cross-correlation of multiple channels are established based on measurement data collected using a wideband multiple-input multiple-output relay Band Exploration and Channel Sounder system at 3.7 GHz. We propose models for the cross-correlation characteristics of large-scale parameters (LSPs) between two links, that is, the base station and mobile station (MS) link and the relay station and MS link. The LSPs include shadow fading, Rician K-factor, delay spread, angle spread of arrival, and angle spread of departure. Furthermore, models are established for the cross-correlation of the small-scale fading in the impulse responses of two links. The statistics of these model parameters are investigated as functions of geometrical features of the multilink. They are extracted from a large amount of cross-correlation observations, which are obtained in three measurement sites along more than one hundred measurement routes. These models can be used together with the standard single-link channel models for the generation of correlated components, for example, path clusters, in two separate channels.