• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.39-45
• /
• 2008

High-Rate Wireless Personal Area Networks (HR-WPANs) in IEEE 802.15.3 standard use a TIme Devision Multiple Access (TDMA) protocol to support isochronous traffic. Isochronous traffic requires a delay-bounded service. However, the HR-WPAN standard suffers from long access delay and association delay. In this paper, we propose an enhanced MAC protocol for the delay-bounded traffic. This proposed protocol provides a way that a central node is able to collect traffic status on all member nodes. Furthermore, by utilizing the information, a scheduling algorithm is also proposed in order to synchronize the instant of a packet transmission with that of the packet arrival. With the proposed protocol and algorithm, the delay of access and association can be reduced. Performance analysis is carried out and the significant performance enhancement is observed.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.43-54
• /
• 2007

The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.295-301
• /
• 2020

When a spacecraft in deep space falls into an abnormal state, an emergency communication channel between ground and the spacecraft is essential in order to perform analysis to the cause of the anomaly, and to remedy the spacecraft from the distressed state. Because the recovery actions generally comprises of long and complicated sequences of commands, the transmission of the recovery commands may require a reliable and a delay tolerant networking technology based on bundle routing. While the delay tolerant networking protocol becomes a prominent method interfacing ground and space into a internet-like Solar system network because it can address the issues of the severe communication problems in deep space, the communication system on the spacecraft which based on space packet protocol cannot use the delay tolerant networking technology directly. So a community of the consultative committee for space data systems starts a discussion of the first-hop last-hop mechanism to establish a feasible concept and standardization. This paper presents an enhanced concept of the first-hop last-hop by applying it a virtual cislunar communication environment, and we believe this contributes to make a way applicable to an interoperable relay concept of the first hop last hop between the delay tolerant networking and space packet protocol standard.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.21-28
• /
• 2019

Recent research on energy harvesting wireless sensor networks focuses on the development of techniques to solve the limited energy resource problem and to extend the whole network life efficiently. Energy harvesting technology can increase the lifetime of a network, but data transmission becomes unavailable when it harvests energy from radio frequency, resulting longer network delay with respect to the increased time in energy harvesting. Therefore, building energy harvesting wireless sensor network should consider the possible network delay as well as the network lifetime problem. In this paper, we propose a new MAC protocol that minimizes end-to-end network delay by adjusting the data transmission time for a packet based on estimating the energy for data transmission along with the amount of traffic flowing into the network and harvested energy. For this goal, it engineers an energy management mechanism that adjusts the sleep time of the network by measuring energy harvesting time. In addition, with simulation results it shows that the proposed MAC protocol improves the performance in terms of energy consumption and end-to-end delay, compared to the existing MAC protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.132-141
• /
• 2000

In this paper, we proposed the MAC protocol of APON supporting multi-class traffic such as CBBUVBR, ABR, UBR, to guarantee the required QoS of each service. For this, we analyze the performance of variousrequest mechanisms and employee the different request mechanism for each traffic classes. Upstream anddownstream frame structures to minimize transmission overhead are proposed based on our request mechanism.The proposed MAC protocol applies the different priority to permit distribution process. CBBWBR traffic, withthe stringent requirements on CDV or delay, is allocated prior to any other class. ABR traffic, which hasnon-strict CDV or delay criteria, uses flexibly the available bandwidth but ensures a minimum cell rate (MCR).UBR traffic is allocated with lowest priority for the remaining capacity. The performance of proposed protocol isevaluated in terms of transfer delay and 1-point CDV with various offered load. The result of simulation showsthat the proposed protocol guarantees the required QoS of the corresponding category, while making use of theavailable resources in both an efficient and dynamical way.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.577-584
• /
• 2010

In this paper, a cooperative MAC protocol that is reliable over bad wireless channel environments and thus can enhance the system performance much more is proposed. Its performance is evaluated with the computer simulation. The system throughput and average waiting delay are used as performance measures. According to numerical results, the proposed MAC protocol provides better system throughput by 24% than the traditional rDCF scheme. From the average waiting delay point of view, when the number of terminals is small, the proposed MAC protocol has the better performance in an average view-point than the rDCF scheme. However, when the number of terminals is large, the proposed MAC protocol provides a little worse performance than the rDCF scheme. That is because, when the number of terminals is large, the dominant factor affecting the system performance is channel contention procedure, which results in lots of collisions. However, if the queuing delays in the waiting buffers are included for calculating the average waiting delay, then the total system delay will be smaller than the rDCF scheme.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.56-66
• /
• 2013

In MANET, the frequent movement of nodes causes the dynamic network topology changes. Therefore, it is required that the routing protocol should be very stable to effectively respond the changes of the network changes. Moreover, the existing cluster-based routing protocol, that is the hybrid approach, has routing delay due to the re-electing of the cluster header. In addition, the routing table of CBRP has all only one hop distant neighbor nodes. PCBRP, proposed in this paper, ties two clusters in one paired cluster to make longer radius. Then the headers of the paired cluster manage and operate corresponding member nodes. In the current CBRP, when the cluster header leaves out the cluster, the delay, due to the re-electing a header, should be occurred. However, in PCBRP, another cluster header of the paired cluster plays the role instead of the left cluster header. This method reduces the routing delay. Concurrently, PCBRP reduces the delay when they route nodes in the paired cluster internally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.877-885
• /
• 2005

The Home Phoneline Networking Alliance (HomePNA) 2.0 technology can establish a home network using existing in-home phone lines, which provides a channel rate of 4-32 Mbps. HomePNA 2.0 Medium Access Control(MAC) protocol adopts an IEEE 802.3 Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method, Quality of Service(QoS) algorithm, and Distributed Fair Priority Queuing(DFPQ) collision resolution algorithm. In this paper, we propose some mathematical models about the important elements of HomePNA 2.0 MAC protocol performance, which are Saturation Throughput, Packet Delay and Packet Jitter. Then, we present an overall performance analysis of HomePNA 2.0 MAC protocol along with simulations.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.161-169
• /
• 2009

The development of Wireless Multimedia Sensor Networks(WMSNs) is getting realized in accordance with the increased demands to provide multimedia data transmission service such as CCTV movie, image chapter information, audio information based on wireless sensor network. It is very important to provide the differentiated quality assurance of service. In this paper, we propose a sensor medium access control protocol based on DSMAC, which provides differentiated Quality of Service(QoS) for delay. A proposed protocol is able to reduce the delay without increasing the energy consumption by adaptively changing the duty cycle according to the buffer occupancy. Simulation results show that the new MAC protocol performs better in terms of latency than S-MAC and DSMAC.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.22-31
• /
• 2000

The VB5.2 interface of B-lSDN, that is located between an access network and a service node, allows dynamic allocation and release of ATM resources. In this paper, we propose the B-ANCC protocol of the VB5.2 interface to minimize the overall connection setup delay by introducing the access network. The B-ANCC protocol enhances the B-BCC protocol and adopts a parallel interworking function with signaling protocols in the service node. To confirm the correctness of the proposed B-ANCC protocol, we validate it using the automated validation tool, SPIN. We analyze and simulate the sequential interworking model based on the B-BCC protocol and the parallel interworking model based on the B-ANCC protocol, in terms of a connection setup delay and a completion ratio. It is shown that our proposed parallel interworking model with B-ANCC reduces a setup delay and improves a completion ratio compared to the sequential interworking model with B-BCC.