• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2095-2100
• /
• 2012

In this paper, we propose the channel sounding scheme which is made for ideal communication between some application as well as the short distance of high speed data transmission in MIMO-OFDM system for Wireless PAN. This method is able to perceive the duration of the impulse response through the delaying of power delay profile, modeled a power delay profile which has an attenuate characteristic, and obtained the coefficient of channel response by ML (maximum likelihood). Through the amplitudes, phases and delays associated with each multipath component which were acquired from this channel sounding scheme, we can describe the wave propagation characteristics of channels between the transmitter and receiver so that the receiver could enhance not only the reliability but also the ability of communication link. Multi agent system models can be used to analyze the path of the system within any time frame. Further, parameter values can be perturbed to examine how the path of the system changes in response to exogenous shocks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.310-317
• /
• 1993

This paper presents a mechanism for improving performance of the IEEE 802.6 MAN(Metropolitan Area Network), a dual-bus structured high-speed communication network, by a more efficient use of bandwidth. The MAN protocol is able to handle various traffic and offers better transmission speed than the conventional LAN, but the unidirectional bus structure and propagation delay of request bits results in unfairness since higher nodes use more bandwidth. As the number of stations and the distances between them are increased, the problem becomes mere serious. As a solution, this paper presents a method that every station enables to identify the used slots, and that a specified class denoted 'erasure station' has with the functions of destination release, slot reuse. As a result, it is export to improve network bandwidth values of each station and the throughput and delay time was analytically analyzed, and it is shown that according to computer simulation results, this mechanism improves the network performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.64-71
• /
• 2014

Multiplier performs a complex arithmetic operation in various signal processing algorithms such as multimedia and communication system. The multiplier also suffers from its relatively large signal propagation delay, high power dissipation, and large area requirement. This paper presents memristor-CMOS based reconfigurable multiplier reducing area occupation of the multiplier circuitry and increasing compatibility using optimized bit-width for various applications. The performance of the memristor-CMOS based reconfigurable multiplier are estimated with memristor SPICE model and 180 nm CMOS process under 1.8 V supply voltage. The circuit shows performance improvement of 61% for area, 38% for delay and 28% for power consumption respectively compared with the conventional reconfigurable multipliers. It also has an advantage for area reduction of 22% against a twin-precision multiplier.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.542-554
• /
• 1997

In this paper, we present a resource conscious approach to designing distributed real-time systems as an extension of our original approach [8][9] which was limited to single processor systems. Starting from a given task graph and a set of end-to-end constraints, we automatically generate task attributes (e.g., periods and deadlines) such that (i) the task set is schedulable, and (ii) the end-to-end timing constraints are satisfied. The method works by first transforming the end-to-end timing constraints into a set of intermediate constraints on task attributes, and then solving the intermediate constraints. The complexity of constraint solving is tackled by reducing the problem into relatively tractable parts, and then solving each sub-problem using heuristics to enhance schedulability. In this paper, we build on our single processor solution and show how it can be extended for distributed systems. The extension to distributed systems reveals many interesting sub-problems, solutions to which are presented in this paper. The main challenges arise from end-to-end propagation delay constraints, and therefore this paper focuses on our solutions for such constraints. We begin with extending our communication scheme to provide tight delay bounds across a network, while hiding the low-level details of network communication. We also develop an algorithm to decompose end-to-end bounds into local bounds on each processor of making extensive use of relative load on each processor. This results in significant decoupling of constraints on each processor, without losing its capability to find a schedulable solution. Finally, we show, how each of these parts fit into our overall methodology, using our previous results for single processor systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.121-127
• /
• 2016

Satellite communication is a communication method using a satellite as a repeater communication on the air and have a communication range is wide and is possible to transmit high-speed data, so Satellite communication has been highlighted as the next generation communication. However, because the distance between the ground and the satellite is far away, there is a disadvantage that propagation delay time is very long and packet is damaged. Therefore, this study was applied to Link Relay H-ARQ system in order to complement the damage to the packet. Furthermore, we propose the Modified Link Relay H-ARQ scheme is a new scheme to supplementation the delay time. By applying the Markov channel for implementing a channel of satellite communications, the results of analyzing the performance, when applying the Link Relay HARQ scheme, BER and PER performance was improved, when applying the Modified Link Relay H-ARQ scheme, Throughput performance was confirmed improvement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.95-99
• /
• 2008

Cu has been used for metallic interconnects in ULSI applications because of its lower resistivity according to the scaling down of semiconductor devices. The resistivity of Cu lines will affect the RC delay and will limit signal propagation in integrated circuits. We investigated the electrolyte effects of the electroplating solution in the resistivity value of Cu films grown by electroplating deposition (EPD). The resistivity was measured with a four-point probe and the material properties were investigated with XRD (X-ray Diffraction), AFM (Atomic Force Microscope), FE-SEM (Field Emission Scanning Electron Microscope) and XPS (X-ray Photoelectron Spectroscopy). From these experimental results, we found that the electrolyte condition plays an Important role in formation of Cu film with lower resistivity by EPD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1045-1053
• /
• 2012

Link-16 is a widely used TDL (Tactical Data Link) which uses TDMA (Time Division Multiple Access). Link-16 is a very low rate system, so it supports small size of data like tactical message and voice. However, there are related works to transmit situation awareness information like image due to the increasing interest about EBO(Effect-Based Operation), recently. Special TDMA scheduling is needed not static TDMA of Link-16 for image transmission because image data has much larger size than the existing tactical data. In this paper, we proposed Link-16K which enhances the Link-16 MAC. The proposed Link-16K is compatible with Link-16, and includes dynamic TDMA, new packing method, and an efficient retransmission scheme for image transmission effectively. We can see that image transmission delay is reduced and channel utilization is increased through simulation results of proposed idea.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.392-399
• /
• 2014

The underwater acoustic communication is characterized by doubly spread channels, which are the delay spread due to multiple paths and the doppler spread due to environmental fluctuations or a moving platform. An equalizer is used to remove the inter-symbol interferences that the delay spread causes, but an equalizer doesn't use an acoustic environment such as a multipath. However, a passive time-reversal mirror is simpler than an equalizer because a matched filter is implemented numerically at the receiver structure along with one-way propagation. In this paper, a passive time-reversal mirror is applied to remove interferences due to a multipath in sea-going experimental data in East Sea in Oct. 2010 and improved communication performance is confirmed. The performance is verified by comparing the signal-to-interference plus noise ratio before/after passive time-reversal mirror. It is also performed independently of the passive time-reversal mirror and adaptive equalizer and the bit error rate is compared to verify the performance of underwater acoustic communication.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.101-104
• /
• 2000

Nowadays, the issue of congestion control in high-speed communication networks becomes critical in view of the bandwidth-delay products for efficient data flow. In particular, the fact that the congestion is often accompanied by the data flow from the high-speed link to low-speed link is important with respect to the stability of closed-loop congestion control. The Virtual-Connection Network (VCN) in Gigabit Ethernet networks is a packet-switching based network capable of implementing cell- based connection, link-by-link flow-controlled connection, and single- or multi-destination virtual connections. VCN described herein differ from the virtual channel in ATM literature in that VCN have link-by-link flow control and can be of multi-destination. VCNs support both connection-oriented and connectionless data link layer traffic. Therefore, the worst collision scenario in Ethernet CSMA/CD with virtual collision brings about end-to-end delay. Gigabit Ethernet networks based on CSMA/CD results in non-deterministic behavior because its media access rules are based on random probability. Hence, it is difficult to obtain any sound mathematical formulation for congestion control without employing random processes or fluid-flow models. In this paper, an analytical method for the design of a congestion control scheme is proposed based on Smith＇s principle to overcome instability accompanied with the increase of end-to-end delays as well as to avoid cell losses. To this end, mathematical analysis is provided such that the proposed control scheme guarantees the performance improvement with respect to bandwidth and latency for selected network links with different propagation delays. In addition, guaranteed bandwidth is to be implemented by allowing individual stations to burst several frames at a time without intervening round-trip idle time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1200-1209
• /
• 2011

In this paper, we propose a novel energy efficient MAC protocol which is based on orthogonal frequency division multiple access (OFDMA) and exploits the physical characteristic that propagation loss of acoustic wave depends on the distance. In the proposed scheme, sensor nodes are grouped according to the distance to sink node. Then, each group uses a different frequency band. The proposed scheme not only enables all sensor nodes to maintain the signal-to-noise ratio above a certain required level (Accepted Minimum SNR, AMS), but also reduces overall transmission power consumption. In addition, the dynamic sub-channel allocation is employed in order to improve data transmission rate. Simulations show that proposed MAC protocol has better performance in a delay-tolerant underwater acoustic sensor networks.