• 제목/요약/키워드: Delay profile

검색결과 159건 처리시간 0.024초

PN 511칩 코드의 ACF를 이용한 지상파DTV 이동 채널의 Delay Profile 특성 분석에 관한 연구 (Delay profile modeling for terrestrial DTV mobile channel using auto-correlation function of PN511)

  • 박기욱;이종현;서원기;김승원;이용태;차재상
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2006년도 학술대회
    • /
    • pp.223-227
    • /
    • 2006
  • 본 논문에서는 이동 환경에서 지상파DTV의 Delay Profile의 도출을 위하여 이동 상태에서 필드테스트로 측정된 수신데이터에 포함되어 있는 PN 511(Psuedo Noise)코드를 이용하여 다양한 이동환경에서의 ACF(Auto Correlation Function)값을 도출하였다. 또한, 지역별 대표적인 LOS지역, NLOS지역, 중간지역으로 구분되는 대표적인 세 곳을 선정하여 다양한 이동속도에서의 도출된 ACF값을 통해 최대지연, 평균지연, RMS 지연을 도출하여 이동환경에서의 지상파 DTV의 Delay Profile을 제시하였다.

  • PDF

공용데이터링크를 위한 공대지 채널 모델링 (Aeronautical to Ground Channel Modeling for Common Data Link)

  • 박홍석;심재남;김동현;김동구
    • 한국통신학회논문지
    • /
    • 제41권12호
    • /
    • pp.1876-1883
    • /
    • 2016
  • 본 논문에서는 고속의 공용데이터링크(common data link, CDL)를 위한 새로운 채널 모델을 제안한다. 송신기의 고도가 수km ~ 수십km이고 통달거리가 수백km인 경우 지구 곡률에 의해 송신신호가 수신기의 앞 쪽에서 지면에 반사되어 들어오는 Two-ray 채널이 발생할 가능성이 크다. 송수신기의 빔포밍(beamforming) 각도와 안테나 방사 패턴(radiation pattern)에 따라 반사 경로로 들어오는 신호의 최대 지연 시간(maximum delay)과 전력 지연 프로파일(power delay profile)을 추정하여 Two-ray 채널을 모델링한다. 제안하는 채널 모델에서는 통달거리가 길기 때문에 전력 지연 프로파일이 최대 지연 시간보다 신호 대 잡음비(signal to noise ratio, SNR)에 대한 비트 오류율(bit error rate, BER)에 더 큰 영향을 미친다.

시간 지연을 갖는 페이딩 채널의 전력 지연 분포 특성 분석 및 활용 (Analysis and Utilization of the Power Delay Profile Characteristics of Dispersive Fading Channels)

  • 박종현;김재원;송의석;성원진
    • 한국통신학회논문지
    • /
    • 제32권8C호
    • /
    • pp.681-688
    • /
    • 2007
  • 통신 수신기 구현에 있어 채널의 특성을 파악하여 그에 적합한 수신 신호 처리를 수행하는 것은 수신 성능 향상을 위해 매우 중요하다. 무선 채널은 전력 지연 분포(power delay profile)에 따라 다양한 시간 지연 특성을 가지며, 추정된 채널의 전력 합산을 통해 시간 지연 정도를 판별 시, 채널 적응적인 수신 구조 구현이 가능하다. 본 논문에서는 전력 지연 분포의 합산을 통해 시간 지연의 상대적인 크기에 따른 채널 군으로 분류하는 경우에 있어 채널 판별 오류 확률을 closed-form 수식으로 유도하고, 다수 번의 추정 결과를 누적하여 활용 시 얻어지는 성능 이득을 제시한다.

Improved Maximum Access Delay Time, Noise Variance, and Power Delay Profile Estimations for OFDM Systems

  • Wang, Hanho;Lim, Sungmook;Ko, Kyunbyoung
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권12호
    • /
    • pp.4099-4113
    • /
    • 2022
  • In this paper, we propose improved maximum access delay time, noise variance, and power delay profile (PDP) estimation schemes for orthogonal frequency division multiplexing (OFDM) system in multipath fading channels. To this end, we adopt the approximate maximum likelihood (ML) estimation strategy. For the first step, the log-likelihood function (LLF) of the received OFDM symbols is derived by utilizing only the cyclic redundancy induced by cyclic prefix (CP) without additional information. Then, the set of the initial path powers is sub-optimally obtained to maximize the derived LLF. In the second step, we can select a subset of the initial path power set, i.e. the maximum access delay time, so as to maximize the modified LLF. Through numerical simulations, the benefit of the proposed method is verified by comparison with the existing methods in terms of normalized mean square error, erroneous detection, and good detection probabilities.

차량의 가속내구시험을 위한 TEST ROAD PROFILE 설계방법 (Design Method of Test Road Profile for Vehicle Accelerated Durability Test)

  • 민병훈;정원욱
    • 한국자동차공학회논문집
    • /
    • 제2권1호
    • /
    • pp.128-141
    • /
    • 1994
  • This roport explain the basic theory of desinging the accelerating durability test road and the role of each factors contributing to test road surface profile. Also this road is designed by considering the charactors of vehicle suspension system and condition of driving. In test road, the factors affecting to the vehicle Structural durability are correlation among surface shape of road profile, frequency of vehicle suspension system, distribution of axletwist angle and vibration profile height Road PSD magnitude and frequency delay is used to control these factors relation.

  • PDF

곡선형 지하철 터널환경에서 전파 특성의 측정과 분석 (Measurement and Analysis of Propagation Characteristics in Curved Subway Tunnel Environments)

  • 정회동;박노준;강영진;송문규
    • 한국통신학회논문지
    • /
    • 제29권8A호
    • /
    • pp.950-961
    • /
    • 2004
  • 이 논문에서는 최근 무선 통신 환경으로 증가하고 있는 지하철 터널 환경에서의 전파 특성을 측정하고 분석하였다. 측정은 지하철 터널에서 2.45㎓와 5.8㎓의 주파수 대역을 가지고 수행하였다. 측정을 위해 사용된 터널의 길이는 LOS(line of sight: LOS)가 175m이고, NLOS(non line of sight: NLOS)가 270m이다. 지하철 터널은 곡선형이며, 그 단면은 마제형(horseshoe type)이다. 측정 시스템은 협대역 시스템과 광대역 시스템을 이용한다. 협대역 시스템은 경로손실(path loss: PL) 측정을 위해 사용되고 광대역 시스템은 전력지연프로파일(power delay profile: PDP) 측정을 위해 사용된다. 특히, 광대역 시스템은 슬라이딩 코릴레이션 기법을 기반으로 80MHz 칩율과 1023길이의 PN 시퀀스 발생기로 구성하였다. 안테나 빔 형태에 따른 전파특성을 분석하기 위해서 무지향성 안테나와 지향성 안테나를 사용하였다. 경로손실은 터널 환경의 순수한 경로손실만을 나타내었다. 지연 프로파일은 평균초과지연(Mean Exess Delay)와 RMS 지연확산(RMS delay spread)에 대해서 분석하였다.

젯팅 디스펜서 변위확대장치의 응답지연 개선 연구 (Improvement for Response Delays of Displacement Magnifier in Jetting Dispenser)

  • 하명우;이광희;홍승민;이철희
    • 한국소음진동공학회논문집
    • /
    • 제26권5호
    • /
    • pp.546-551
    • /
    • 2016
  • The objective of this study is to investigate the response delays between piezo-stack actuator and the displacement magnifier of jetting dispenser and to reduce its falling time in terms of displacement optimization. The dispenser is driven by the dual piezo-stack actuators with a hinge lever mechanism to precisely control flow rate of the working fluid (3000 cP). It is commonly found that piezo actuator-driven jetting dispensers involving viscous working fluids have displacement optimization problem for ideal performance. The response delay of the system is caused by the phenomenon that the displacement magnifier cannot exactly follow the motion of the piezo actuators. The response delay may lower the performance of the system due to the inaccurate discharge of working fluid or even damages to the system itself due to inharmonious motion of piezo actuators with lever system. To reduce its response delay, a new displacement profile obtained from displacement optimization is suggested; its performance is tested through finite element analysis; and experiments are carried out to verify the performance of the obtained displacement profile.

Channel Transfer Function Estimation based on Delay and Doppler Profile for Underwater Acoustic OFDM Communication System

  • Shiho, Oshiro;Tomohisa, Wada
    • International Journal of Computer Science & Network Security
    • /
    • 제23권1호
    • /
    • pp.96-102
    • /
    • 2023
  • In this paper, we proposed Channel Transfer Function estimation based on Delay and Doppler Profile for underwater acoustic OFDM communication system. It improved the estimation accuracy of the channel transfer function by linear time interpolation the change of Scattered Pilot (SP) insertion frequency in the time direction and the time by Delay and Doppler profile that analyzes the multipath situation of the channel investigated the performance of interpolation by simulation and report it. Previous works is inserted SP every 4 OFDM. It was effective under the environment without multipath, but it has observed that the effect of CTF compensation has been lowered in multipath channel condition. In addition to be better when inserted SP every 2 OFDM. But the amount of sending data will be decrease. Therefore, we conducted research to improve 4 OFDM with new interpolator. A computer simulation was performed as a comparison of SP inserted every 4 OFDM, SP inserted every 2 OFDM, and 4 OFDM with new interpolator. the performance of the proposed system is overwhelmingly improved, and the performance is slightly improved even 64 QAM.

저가형 마이크로프로세서를 위한 연산처리 확장 모션제어 알고리즘 (Motion Control Algorithm Expanding Arithmetic Operation for Low-Cost Microprocessor)

  • 문상찬;김재준;남규민;김병수;이순걸
    • 제어로봇시스템학회논문지
    • /
    • 제18권12호
    • /
    • pp.1079-1085
    • /
    • 2012
  • For precise motion control, S-curve velocity profile is generally used but it has disadvantage of relatively long calculation time for floating-point arithmetics. In this paper, we present a new generating method for velocity profile to reduce delay time of profile generation so that it overcomes such disadvantage and enhances the efficiency of precise motion control. In this approach, the velocity profile is designed based on the gamma correction expression that is generally used in image processing to obtain a smoother movement without any critical jerk. The proposed velocity profile is designed to support both T-curve and S-curve velocity profile. It can generate precise profile by adding an offset to the velocity profile with decimals under floating point that are not counted during gamma correction arithmetic operation. As a result, the operation time is saved and the efficiency is improved. The proposed method is compared with the existing method that generates velocity profile using ring buffer on a 8-bit low-cost MCU. The result shows that the proposed method has no delay in generating driving profile with good accuracy of each cycle velocity. The significance of the proposed method lies in reduction of the operation time without degrading the motion accuracy. Generated driving signal also shows to verify effectiveness of the proposed method.

골덴하르 증후군(Goldenhar syndrome)아동에 대한 감각통합치료 평가와 중재: 사례연구 (Sensory Integration therapy Evaluation and Intervention in Clients With Goldenhar Syndrome : A Case Report)

  • 정희승
    • 한국콘텐츠학회논문지
    • /
    • 제11권11호
    • /
    • pp.286-295
    • /
    • 2011
  • 본 연구는 전반적인 발달지연, 감각 예민성, 촉각 방어와 작업수행의 문제를 가진 골덴하르 증후군 아동에게 감각통합치료를 적용하여, 골덴하르 증후군 아동의 감각통합 치료적 중재 개입방향을 제시하고자 하였다. 본 증례 아동은 만 7세 10개월 남아로 학교와 일상생활에서, 놀이와 학습에 대한 어려움, 운동발달 지연을 주 호소로 하여 검사가 의뢰되었다. 감각통합치료를 위한 평가로 캐나다 작업수행 측정(Canadian Occupational Performance Measure)시 바른 자세로 한글 읽고 쓰기가 첫째 작업수행 목표로 나타났고, 단축 감각프로파일(Short Sensory Profile) 과 감각 인터뷰에서는 감각 예민성과 촉각 처리영역에서 확연한 차이로 감각통합치료 중재가 요구되었다. 발달 프로파일 -3(Developmental Profile -3)은 5개 발달영역에서 전반적인 발달 지연이 나타났고, 운동 숙련도 검사 (Bruininks-Oseretsky Test of Motor Proficiency-2)에서 운동발달 수준이 평균 이하로 나타났다. 본 증례 아동에 대한 감각통합 치료를 통해 전반적인 발달, 감각예민성, 촉각방어와 같은 감각조절 기능이 향상되고, 작업수행이 개선되는데 도움이 되었다. 본 사례연구를 통해서 국내 골덴하르 증후군 아동의 감각통합치료 접근법에 기초 자료가 될 것이라고 사료된다.