• Clinical and Experimental Pediatrics
• /
• v.50 no.9
• /
• pp.868-874
• /
• 2007

Purpose : We performed this study to investigate the perinatal and developmental features of the patients with congenital myotonic dystrophy (CDM) confirmed by the molecular genetic method and the clinical characteristics of their mother, and to identify the relation between the number of CTG repeats and the clinical severity.Methods : A retrospective review of the medical records and the results of the dystrophia myotonica protein kinase (DMPK) gene test was done for the patients who were confirmed as CDM through gene analysis from January 2001 to September 2006. Results : All of the eight patients (male 2, female 6) showed moderate to severe degree of perinatal distress and feeding difficulty associated with profound hypotonia. Three patients had the history of polyhydramnios and two patients had equinovarus deformity. The developmental milestones were delayed in all patients, which improved gradually with age. All of their mothers demonstrated myotonic symptoms and typical myopathic face. The number of CTG repeats in DMPK gene analysis ranged 1,000-2,083, and there was no significant correlation between the number of CTG repeats and the time of walking alone. Conclusion : All patients with CDM presented with severe hypotonia in perinatal period, and developmental delay thereafter, which were improved with age. All of their mothers manifested myotonic symptoms with typical myopathic face, and the identification of such features greatly contributed to the diagnosis of the patients. The number of CTG repeats had no significant influence on the motor development.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.2
• /
• pp.101-106
• /
• 1999

These studies were carried out to investigate the quality of green tea processed by different 1st-pan-firing time and to select the best conditions of green tea processing. The results were as follows. At harvesting tea plant leaf, tea plants had 4 leaves, each leaf size was $6.4cm\;{\times}\;2.4cm$, and weight of 100 buds was 40.2g. The content of moisture of green tea was decreased with the prolongation of 1st-pan-firing time, and the yield of green tea at 10 min. pan-firing time was the highest value of 20.12%. After processing green tea, 1st 10 min. pan-fired one had much more contents of total nitrogen(TN 5.41%) and total amino acid(T.A.A; 3,282mg/100g) and less content of tannin(13.22%) and caffeine(1.64%) than the other treatments. The content of chlorophyll and vitamin C went down with the extension of 1st pan-firing period. Sixteen kinds of free amino acid including theanine as a good taste component of green tea were isolated and measured by HPLC. T.A.A contents were in the range of $2,447{\sim}3,192mg/100g$ and among various pan-firing methods, 10 min. 1st pan-fired one had the highest content of T.A.A. The taste-determinants such as theanine, aspartic acid, serine, glutamic acid and arginine in green tea liquor, occupied as much as $89.4{\sim}90.0%$ of T.A.A.s. Among these, theanine was more than 50%, Lightness and yellowness of green tea were increased with delay of pan-firing time, while green color appeared to be more distinct at 10 min. 1st pan -firing time than other treatments. Besides, it gained the highest score of sensory evaluation among them. These above results suggested that 10 min. pan-fired green tea was considered to be the best level as pan-firing time of green tea processing.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.73-79
• /
• 2008

Retinal prosthesis is regarded as the most feasible method for the blind caused by retinal diseases such as retinitis pigmentosa (RP) or age related macular degeneration (AMD). Recently Korean consortium launched for developing retinal prosthesis. One of the prerequisites for the success of retinal prosthesis is the optimization of the electrical stimuli applied through the prosthesis. Since electrical characteristics of degenerate retina are expected to differ from those of normal retina, we performed voltage stimulation experiment both in normal and degenerate retina to provide a guideline for the optimization of electrical stimulation for the upcoming prosthesis. After isolation of retina, retinal patch was attached with the ganglion cell side facing the surface of microelectrode arrays (MEA). $8{\times}8$ grid layout MEA (electrode diameter: $30{\mu}m$, electrode spacing: $200{\mu}m$, and impedance: $50k{\Omega}$ at 1 kHz) was used to record in-vitro retinal ganglion cell activity. Mono-polar electrical stimulation was applied through one of the 60 MEA channel, and the remaining channels were used for recording. The electrical stimulus was a constant voltage, charge-balanced biphasic, anodic-first square wave pulse without interphase delay, and 50 trains of pulse was applied with a period of 2 sec. Different electrical stimuli were applied. First, pulse amplitude was varied (voltage: $0.5{\sim}3.0V$). Second, pulse duration was varied $(100{\sim}1,200{\mu}s)$. Evoked responses were analyzed by PSTH from averaged data with 50 trials. Charge density was calculated with Ohm's and Coulomb's law. In normal retina, by varying the pulse amplitude from 0.5 to 3V with fixed duration of $500{\mu}s$, the threshold level for reliable ganglion cell response was found at 1.5V. The calculated threshold of charge density was $2.123mC/cm^2$. By varying the pulse duration from 100 to $1,200{\mu}s$ with fixed amplitude of 2V, the threshold level was found at $300{\mu}s$. The calculated threhold of charge density was $1.698mC/cm^2$. Even after the block of ON-pathway with L-(1)-2-amino-4-phosphonobutyric acid (APB), electrical stimulus evoked ganglion cell activities. In this APB-induced degenerate retina, by varying the pulse duration from 100 to $1200{\mu}s$ with fixed voltage of 2 V, the threshold level was found at $300{\mu}s$, which is the same with normal retina. More experiment with APB-induced degenerate retina is needed to make a clear comparison of threshold of charge density between normal and degenerate retina.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.750-756
• /
• 2008

Supernumerary teeth are frequently found in the anterior portion of the maxilla and develop as a result of abnormal proliferation of the dental lamina during tooth germ formation, caused by genetic or environmental factors. They may result in various complications, such as eruption interference, displacement, rotation of adjacent teeth, diastema, eruption into the nasal cavity, and development of dentigerous cyst. The optimal time for surgical extraction of supernumerary teeth has been a controversial issue. Someone prefer early surgical extraction because supernumerary teeth can cause eruption interference and displacement of adjacent teeth, eventually altering occlusion. Others prefer to delay surgical extraction until $8{\sim}10$ years of age in consideration of root maturation of the adjacent teeth and also patient's behavior. When surgical extraction of supernumerary teeth is postponed, there is possibility that impacted supernumerary teeth in the inverted or horizontal position move toward the nasal cavity, hard palate, or premolar area. When such intraosseous tooth migration is combined with the vertical growth of the maxilla, surgical approach becomes even harder. Therefore, possibility of intraosseous tooth migration should be considered as an important factor when deciding appropriate time for surgical extraction. We are presenting cases of mesiodens which showed intraosseous migration during $6{\sim}7$ years of follow-up period since the first diagnosis had been made at the $2{\sim}3$ years of age.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.108-116
• /
• 2009

In this paper, we propose a Ethernet based audio distribution system with a new L1/L2 hybrid switching scheme, and evaluate its performance. The proposed scheme not only offers guaranteed low latency and jitter characteristics that are essentially required for the distribution of high-quality uncompressed audio traffic, and but also provide an efficient transmission of data traffic on the Ethernet environment. The audio distribution system with a proposed scheme consists of a master node and a number of relay nodes, and all nodes are mutually connected as a daisy-chain topology through up and downlinks. The master node generates an audio frame for each cycle of 125us, and the audio frame has 24 time slotted audio channels for carrying stereo 24 channels of 16-bit PCM sampled audio. On receiving the audio frame from its upstream node via the downlink, each intermediate node inserts its audio traffic to the reserved time slot for itself, then relays again to next node through its physical layer(L1) transmission - repeating. After reaching the end node, the audio frame is loopbacked through the uplink. On repeating through the uplink, each node makes a copy of audio slot that node has to receive, then play the audio. When the audio transmission is completed, each node works as a normal L2 switch, thus data frames are switched during the remaining period. For supporting this L1/L2 hybrid switching capability, we insert a glue logic for parsing and multiplexing audio and data frames at MII(Media Independent Interlace) between the physical and data link layers. The proposed scheme can provide a good delay performance and transmission efficiency than legacy Ethernet based audio distribution systems. For verifying the feasibility of the proposed L1/L2 hybrid switching scheme, we use OMNeT++ as a simulation tool with various parameters. From the simulation results, one can find that the proposed scheme can provides outstanding characteristics in terms of both jitter characteristic for audio traffic and transmission efficiency of data traffics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.215-225
• /
• 2016

This study seeks to find an alternative to the requirement for proving the competitiveness of Korean performing arts before entering into the overseas market by deriving the factors causing entry into the market to be delayed based on an analysis of the current status. Between 2007 to 2014, the overseas revenues from Korean performing arts increased by 16.4% compared to the total amount of financial support, as the number of free performances given overseas and the average guaranteed number of performances overseas are both at a standstill. Also, the size of the audience increased by a mere 3.3 times, which is an even lower growth rate than that for the number of performances, 3.8 times, during the same period. Furthermore, the audience size per unit is suffering from long-term stagnation. The main causes are as follows: 1) applying one-dimensional methods to performing arts exchanges and expanding the overseas market, 2) the existing confused concepts between profit and non-profit contents, 3) the weaknesses of the market expansion strategy, because of programming practices focusing on providers, such as presenters and producers, rather than consumers. As a result, the necessary basic research, including consumer surveys, has not been done yet. In order to understand the implications of this analysis and solve the problem of the delayed overseas expansion of Korean performing arts, the Korean wave industry was examined as a representative example. Consumer surveys for the performing arts, possibly benchmarked to the "Korean Wave Consumer Survey Index (KWCSI)", are expected to be done in the near future. In addition, through the development of a specific consumer index of the performing arts, customized marketing strategies by continent and country need to be established. This empirical study of the overseas expansion of performing arts can be utilized as a bridge between the academic and real worlds. This work may also enable a variety of strategies to be established for the overseas expansion of the performing arts.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.1-10
• /
• 1982

Degree of grain shattering which is of varietal character is an important determinant for the magnitude of field loss of grains during harvest and threshing. Seven Indica \times Japonica progeny varieties and four Japonica varieties were subjected to measurements of tensile strength of grains, degree of grain shattering when panicles were dropped at 1.5m above concrete floor, and moisture content of grains (wet basis) during a period 35 to 63 days after heading. In addition, two varieties were tested for the relation of tensile strength of grains to the magnitude of field loss of grains in actual binder harvest. The 11 varieties differed conspicuously in tensile strength of grains and the degree of grain shattering: the weakest average tensile strength of grains of a variety was about 90g and the strongest about 250g with varying standard deviation of 30 to 60g. Three Indica \times Japonica varieties and one Japonica variety shattered I to 30% of the grains under the falling test. The threshold tensile strength of grains allowing grain shattering was estimated to be 180g on average for a sampling unit of 10 panicles, but only the grains having tensile strength weaker than 98g within the samples shattered. A decrease in average tensile strength by 10g below the threshold value corresponded to an increase of 3 to 5% in grain shattering. Most varieties did not change appreciably the tensile strength of grains and degree of grain shattering with delay in time of harvest and showed a negative correlation between the tensile strength and the moisture content of grains. The average tensile strength of grains was negatively correlated linearly with field loss in binder harvest. The average tensile strength for zero field loss in binder harvest was estimated to be 174g and a decrease in the average tensile strength by 10g corresponded to an increase of 40kg per hectare in field loss of grains. Instead of the average tensile strength of grains, the percentage of grains having tensile strength weaker than 100g is recommended as a criterion for the estimation of field loss of grains during harvesting operations as well as a basis of variety classification for grain shattering, since the standard deviation of tensile strength of grains varies much with variety and time of harvest, and individual grains having tensile strength stronger than 98 did not shatter practically.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.655-665
• /
• 2014

The effect of modified atmosphere packaging (MAP) on kohlrabi (Brassica olerace L. gongulodes group)'s quality and antioxidant molecule during storage was examined to determine the optimal film package for maintaining freshness. To extend shelf life, MAP was tested using PE $50{\mu}m$ and oriented polypropylene (OPP) films with oxygen transmission rate (OTR) at 3,000, 10,000, $15,000mL/m^2/day/atm$. The OPP film packaging with modified oxygen transmission rate showed a delay in a weight loss and extended storage period. The package with OTR 3000 attained the desired gas composition of $O_2$ 3.2-6.7 kPa and $CO_2$ 13.1-19.8 kPa, in storage at room temperature. Kohlrabi stored in this package showed the lowest weight loss and the highest visual quality. Deterioration and off-odor were developed more rapidly in PE $50{\mu}m$ towards the end of the storage at room temperature. However, there are no differences among OTR films in visual quality and off-odor until 60 days at cold storage. Vitamin C content of kohlrabi was reduced rapidly in OTR 15000 with high transmission rate and showed less loss in PE $50{\mu}m$ and OTR 3000 in both room temperatures and cold storage. Results revealed that an OPP film with OTR 3000 extended the shelf life of kohlrabi in storage with maintained quality and vitamin C.

• Korean Journal of Agricultural Science
• /
• v.4 no.1
• /
• pp.51-60
• /
• 1977

In order to determine ecological variations of flowering date and yields under the different seasonal cultures, and to select the higher yielding varieties which were adaptable to Korean climate, 100 mungbean cultivars were sown at the interval of 15 days from April 22 to July 21 in 1976. The results obtained are summarized as follows: 1. The number of days required to flowering from seeding were decreased by delaying the seeding date. 2. When accumulated temperature at first flowering from seeding were reached $945-1,126^{\circ}C$, the mungbean cultivars started to flower regardless of seeding dates. Especially, when mungbean was planted around standard planting date, the plants flowered for very short duration. 3. There were highly significant correlations between the number of days from seeding to flowering at each seeding date and standard planting date. 4. Yields per plant were tend to decrease with the delay of seeding date but there were no significant difference between seeding dates. Therefore, it appears that mungbean can be planted for longer period of time compared to other crops such as rice and soybean. 5. Highly significant correlations were found between the number of days of first flowering and yields per plant at most seeding dates. 6. It may be feasible to grow high yielding mungbean cultivars such as CES 140, LM 2100, LM 690, L 576 and LM 689 after harvesting of spring vegetables in May and before planting of fall vegetables.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.135-140
• /
• 2014

Pre-storage ultra-violet (UV) light treatment on fresh produce is known to inactivate the contaminated microorganisms, activate the defense system, and delay ripening extending the shelf life. As UV light emitting diode (LED) becomes available at a relatively low price, continuous or intermittent UV treatment during chilled storage is possible in a container or package. This study attempted an in situ UV LED treatment on fresh produce stored under a refrigerated container in order to see its potential in the fresh produce storage and further optimize its application conditions. The effect of in-container UV LED irradiation on the quality preservation of shredded carrots was investigated in the air and modified atmosphere (MA) conditions. Two sets of experiment with Escherichia coli inoculation and with natural microbial flora in the air (two 30 minute on-off cycles of 1 $diode/dm^2$ per day at a location above 2 cm) showed a clear and significant effect of the UV LED irradiation on the suppression of microbial growth: 280 nm was the most effective by maintaining a lower microbial count by at least 0.5 log (CFU/g) throughout the 6 day storage period. The carotenoids content of shredded carrots subjected to UV LED treatment at 365 and 405 nm in the air was higher than that of the control shredded carrots. In MA condition of $O_2$ of 1.2~4.3% and $CO_2$ of 8.4~10.6% being indifferent with LED wavelengths, 280 nm UV LED irradiation was also effective in inhibiting the microbial growth. While there was no observed difference in the carotenoids content between untreated and UV LED-treated shredded carrots in MA, UV LED irradiation at 365 and 405 nm was slightly better in DPPH radical scavenging activity. The use of UV LED in storage container or package seems to give the benefits of preserving the microbial and nutritional qualities of minimally processed fruits and vegetables.