• 제목/요약/키워드: Dehydration rate

검색결과 187건 처리시간 0.019초

동결.융해반복작용이 화강암풍화토의 물리적성질에 미치는 영향(II) (The Influence of Freeze-Thaw Process on the Physical Properties of Weathered Granite Soils (2))

  • 유능환;유연택
    • 한국농공학회지
    • /
    • 제31권3호
    • /
    • pp.70-80
    • /
    • 1989
  • In this research program special triaxial compression tests and dehydration-swelling tests under the condition of freeze-thaw process were conducted to show the effects of freezethaw process on the physical properties of weathered granite soil, and their results as follows; 1.Consolidation settlement of weathered granite soil mass was increased due to freeze-thaw process, and the initial tangent coefficient of dense state was higher than that of loose state. 2.Compression behaviour of soil was increased according to the decrease of freezing temperature, and when the freezing temperature was reached under - 10$^{\circ}$C, the compression rate was not influenced by change of freezing temperature. 3.The experiments showed that the void ratio and permeability of soil were converged into their values of shrinkage limit, and the permeability was higher due to the freeze-thaw process and as the lower the freezing temperature. 4.The decrease of liquid limit was indicated as the lower the freezing temperature, and as more the freeze4haw cycles, the moisture content was shown the lower side. 5.It was shown that the shrinkage was decreased by freeze-thaw process and not influenced by way of freezing temperature, but dehydration rate was higher.

  • PDF

식음료폐기물을 이용한 바이오에탄올 생산 (Production of Bioethanol by Using Beverage Waste)

  • 전형진;이병오;강경우;정준성;정봉우;최기욱
    • KSBB Journal
    • /
    • 제26권5호
    • /
    • pp.417-421
    • /
    • 2011
  • Because beverage waste contains a lot of sugar, it can be used as a valuable resource for energy. But beverage waste is discharged through the water treatment. To prevent the waste of the energy resource, we produced bioethanol by using beverage waste in this study. In order to produce bioethanol, we added distillers stillage and NaOH for fermentation condition (nutrients and pH adjustment). As a results, ethanol concentration was 5.92 vol%. In contrast, ethanol concentration of blank (not added nutrients) was low and fermentation rate was very slow. Because components of the distillers stillage help the yeast growth, fermentation yield and rate was improved. Finally, we operated distillation and dehydration process by using fermented mash and produced fuel bioethanol (more than 99.5 wt%). We think that this results may provide useful information with application of commercial ethanol production using beverage waste.

다층 경사기능재료의 제조를 위한 Zr(Y,Ce)$O_2$ TZP/Mullite 현탁액의 가압여과 (Pressure Filtration of Zr(Y,Ce)$O_2$ TZP/Mullite Suspensions for the Preparations of Functionally Gradient Materials with Multi-layer)

  • 이상진;박상희;박홍채;전병세
    • 한국세라믹학회지
    • /
    • 제37권7호
    • /
    • pp.693-699
    • /
    • 2000
  • Casting behavior of Zr(Y,Ce)O2 TZP/Mullite suspension during pressure filtration was investigated to prepare multi-layered Functionally Gradient Materials(FGM). The dispersion stabilities of each layer suspension were investigated by examination of zeta potential and viscosity. The each suspensions with 20 vol.% solid loading and 100 첸 of viscosity was prepared after fix of the dispersing agent (Sodium hexa-meta phosphate) and the binder (Hydroxyethyl cellulose), and then the cakes were formed at the 2.5 MPa~10.0MPa pressure range. The cake thickness of all suspensions was increased with the square root of time at the constant pressure, and the relations between filtration pressure(P)a nd dehydration rate (Q=dh/dt) showed that the flows of filtrates in the consolidated layers were laminar. The permeabilities were nearly constant during filtration, and kozeny constants(Kc) of the suspensions were 4.8~6.7. These valumes were seen as close to 5, which might be homogeneous particle packing during filtration. On the basis of those data, the multi layered compaction with 9 mm thickness and 52.5% green density was prepared by continuous pressure filtration.

  • PDF

돼지 미성숙 난자의 급속동결 융해후 체외수정율과 생존율에 관한 연구 (Studies on the In-Vitro Fertilization and Survival Rate of Rapidly Frozen Porcine Immature Embryos)

  • 오원진;정영호;김상근;이규승
    • 한국가축번식학회지
    • /
    • 제18권1호
    • /
    • pp.25-29
    • /
    • 1994
  • This study was carried out to investigate the in-vitro fertilization rate survival rate of rapidly frozen porcine immature embryos. The porcine embryos following dehydration by cryoprotectants containing sucrose were directly plunged into liquid nitrogen and thawed in 3$0^{\circ}C$ water bath. Survival rate was defined as development rate on vitro culture or FDA test. The results are summarized as follows : 1. The in vitro fertilization rate of all frozen immature oocytes(6.7~26.7%) was very low, 35.0% of unfrozen oocytes and the rate of immature oocytes was very higher than that of mature oocytes. 2. The survival rate of all frozen immature oocytes(10.3~25.0%, 13.3~30.0%) was very low, 45% of unfrozen oocytes and the rate of immature oocytes was slightly higher than that of mature oocytes.

  • PDF

돼지 분할 수정란의 급속동결 융해후 생존율에 관한 연구 (Studies on Effects of Cryoprotectants in the Medium on the Survival Rate of Rapidly Frozen Porcine Bisected Demi-Embryos)

  • 오원진;김상근
    • 한국가축번식학회지
    • /
    • 제18권1호
    • /
    • pp.31-37
    • /
    • 1994
  • This study carried out to investigate the effects of cryoprotectants in the medium on the survival rate of rapidly frozen porcine bisected demi-embryos. The porcine bisected demi-embryos following dehydration by cryoprotectants containing sucrose were directly plunged into liquid nitrogen and thawed in 3$0^{\circ}C$ water bath. Survival rate was defined as development rate on in vitro culture or FDA-test. The results are summarized as follows : 1. The survival rates of without-zona pellucida embryos and 2 blastomeres porcine embryos were 10.0 and 7.1%, respectively. The rate of unfrozen blastomeres (20.00%) was significantly higher than that of non-frozen oocytes. 2. The survival rates of with and without-zona pellucida of bisected porcine embryos by micromanipulator were 20.0 and 14.3%, respectively. 3. The developmental rates of with and without-zona pellucida of bisected poricine embryos by micromanipulator were 13.3 and 7.1%, respectively.

  • PDF

Kinetic and Molecular Orbital Stuides on the Reaction of 5-nitrofurfural Hydrazone Formation

  • Lee, Kyung-Hee;Jee, Jong-Gi
    • Bulletin of the Korean Chemical Society
    • /
    • 제6권5호
    • /
    • pp.280-284
    • /
    • 1985
  • Kinetic measurements of the 5-nitrofurfural-hydrazine reaction in various pH ranges of aquous solution were carried out by ultraviolet spectrophotometry at $25^{\circ},\;35^{\circ}\;and\;45^{\circ}C$. The observed rate of the reaction varies with the change in pH, which gives characteristic "bell-type" rate acidity profile. The maximum rate is shown in the vicinity of pH 4. This reaction procceds with rate-determining attack of hydrazine on the 5-nitrofurfural at low pH and undergoes a change in rate-determining step to dehydration of the addition intermediate as pH increases. The reaction has a "reactant-like transition state" which precedes intermediate in low pH and "product-like transition state" which follows it in neutral pH. The geometry of 5-nitrofurfural-hydrazine intermediate was estimated with PCILO method associated with CNDO/2 scheme.

화학열펌프에 있어서의 무기수화물계 축열시스템에 관한 연구(III) -Ca(OH)2 탈수반응층의 전열해석- (A Study on the Heat Storage System for Chemical Heat Pump Using Inorganic Hydrates (III) -Numerical Analysis of Heat Transfer in Ca(OH)2 Dehydration Packed Bed-)

  • 박영해;이영세;김종식
    • 공업화학
    • /
    • 제7권6호
    • /
    • pp.1181-1191
    • /
    • 1996
  • 본 연구는 고온용 열구동형 화학열펌프에 있어서 폐열 및 태양에너지를 유용하게 이용하기위한 목적으로 $Ca(OH)_2$ 탈수반응시 원주형 반응기 충진층내 핀을 주입 전열촉진한 경우의 전열 및 반응촉진효과에 대해 이론적 평가를 행하였다. 그 결과 탈수흡열 반응시 반응층내 온도분포변화, 반응완결시간, 방열량에 대한 수치해석 결과 구리판 전열핀을 설치한 경우 입자 충전층의 탈수반응 소요시간을 크게 단축시킬 수 있었으며, 본 실험조건 하에서는 전열핀을 주입하지 않았을 때보다 탈수반응 소요시간이 1/2정도 단축됨을 알 수 있었다. 또한 해석결과 열화학반응은 온도 및 농도에 주로 의존하였고, 경계조건과 입자충전층의 열전도도에 의해 크게 좌우되었음을 알 수 있었다.

  • PDF

모델모사를 이용한 막모듈 연결 및 배열이 투과증발 막성능에 끼치는 영향에 관한 연구 (Study on the Effect of Membrane Module Configuration on Pervaporative Performance through Model Simulation)

  • 염충균;윤석복;박유인
    • 멤브레인
    • /
    • 제18권4호
    • /
    • pp.294-305
    • /
    • 2008
  • 본 연구는 공정모사를 통해서 막모듈 배열 및 연결과 막모듈 내에서 공급 잔류액의 온도 변화가 투과증발 공정에 끼치는 영향을 관찰하였으며 이를 위해서 기본 막모듈이 직렬 혹은 병렬로 연결되어 있는 모듈들의 조합을 통한 투과탈수공정을 예측할 수 있는 모델식들을 확립하였다. 에탄올/물 혼합물을 모델 혼합물로 사용하였고 모델식들에 포함되어 있는 투과 파라메타들을 직접 실험에 의해 구하여 사용함으로써 모사의 현실성을 높였다. 모사를 통해서 모듈의 배열방식, 모듈 단의 갯수와 단사이의 공급액의 재가열등의 중요성을 검토하였다.

패류 가공에 관한 연구 2. 건조 방법 및 EDTA, BHA처리가 개량조개 Mactra Sulcataria REEVE의 색소 잔존율 및 흡수율에 미치는 영향에 대하여 (STUDIES ON THE SHELLFISH PROCESSING 2. Effect of Dehydration Method, EDTA or BHA Treatment on the Pigment Retention and the Water Absorbing Capacity of the Dehydrated Meat of the Surf Clam Mactra Sulcataria REEVE)

  • 이응호;허종화
    • 한국수산과학회지
    • /
    • 제3권1호
    • /
    • pp.33-37
    • /
    • 1970
  • 토사질을 제거한 개량조개를 EDTA 및 항산화제 처리를 하여 열풍 건조 및 천일 건조했을 때 건조 방법이나 EDTA 및 항산화제 처리가 변색 및 흡수성에 미치는 영향을 검토한 결과를 요약하면 다음과 같다. 1) 천일 건조한 것이 열풍 건조한 것보다 월등하게 색소 소실이 심하였다. 2) BHA 처리하여 열풍 건조한 것은 생시료와 비교할 때 거의 색소 소실이 없었다. 색소 소실이 많은 것부터 열거하면, 대조구 및 EDTA 자숙 처리구>EDTA 침지 처리구>BHA 처리구의 순이었다. 3) 흡수성은 열풍 건조한 것이 천일 건조 한 것보다 빨랐다. 그리고 BHA 처리구 및 EDTA 처리구 사이에 흡수율의 뚜렷한 차이는 없었다. 4) 개량조개는 BHA 처리를 하여 열풍 건조하면 색소 소실도 적고 복원성도 좋아진다.

  • PDF

생산 방식별 재생 잔골재의 품질에 대한 기초적 연구 (A Study on the Quality Improvement of Recycled Fine Aggregates with Production Methods)

  • 심종우;이세현;유명열;이문환;송태협
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.368-371
    • /
    • 2004
  • It analyzes the quality of the fine aggregate which is reproduced through a dry production process with cyclone and a wet production process. The conclusions of the study are as follows. 1. The recycled fine aggregate through the dry production process with cyclone shows the low rate of absorption and impurity content after the cyclone process. It shows that its density is 2.37, absorption rate is 4.8 and stability is $5.1\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade. 2. The recycled fine aggregate through the wet production process shows the low rate of absorption and foreign substance content after the process of wash and dehydration. It shows that its density is 2.40, absorption rate is 3.12 and stability is $3.2\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade.

  • PDF