• 멤브레인
• /
• 제27권6호
• /
• pp.487-498
• /
• 2017

본 연구에서는 (주)파인텍에서 제조한 제올라이트 4A 분리막을 이용하여 물/메탄올, 물/부탄올 혼합물의 투과증발실험을 수행하였다. 분리막을 투과한 기체분자들은 액체질소트랩을 이용하여 포집하였으며, 기체크로마토그래피(TCD)를 이용하여 혼합물의 조성을 분석하였다. 실험을 통해 물과 메탄올(분리계수 최대 250 이상), 물과 부탄올(분리계수 최대 1,500 이상)의 혼합물에서 선택적으로 물을 분리하는 것을 확인하였다. GMS (generalized Maxwell Stefan) 이론을 적용하여 2성분계의 투과증발 거동을 모사하였으며, 상수추정을 통하여 제올라이트 비지지체의 흡착상수 및 확산상수를 구하였다. 제올라이트 4A 분리막의 경우 기공의 크기가 물보다는 크고, 메탄올, 부탄올 보다는 작기 때문에, 알코올로부터 물을 분리시키는 공정에 적용시킬 수 있다. 바이오 에탄올 분리, 부탄올 분리, 막반응기, 하이브리드 반응-탈수 공정 등에 적용할 수 있을 것으로 사료된다.

• 한국응용과학기술학회지
• /
• 제7권1호
• /
• pp.93-105
• /
• 1990

Semicarbazone formation of nine monosubstituted benzaldehydes was studied kinetically in 20% methanol buffer solution at 15, 25, 35, and $45^{circ}C$. The rate of p-nitrobenzaldehyde semicarbazone formation is 2.7 times as fast as that of benzaldehyde, while p-hvdroxybenzaldehyde is 3.6 times as slow as that of benzaldehyde. Activation energies for p-chlorobenzaldehyde, benzaldehyde, p-methylbenzaldehyde, p-methoxybenzaldshyde, p-hydroxybenzaldehyde, and p-dimethylaminobenzaldehyde semicarbazone formation are calculated as 5.80, 6.19, 6.57, 7.06, 8.03, and 6.46 kcal/mol respectively. It is concluded from the effect of ionic strength that the reaction is affected by not ions but neutral molecules involving hydrogen bonding between oxygen atom of carbonyl group and hydrogen atom of acid-catalyst, and concerted attack of the necleophilic reagent, free base on carbonyl compound. Also, the effect of solvent composition is small in 20% and 50% methanol (and ethanol) aqueous solutions. The ${\rho}-{\sigma}$ plots for the rates of semicarbazone formation at pH 7.1 show a linear ${\rho}-{\sigma}$ relationship (${\rho}=0.14l$, in contrast to that at pH 2.75 and pH 5.4 corresponding to ${\rho}-{\sigma}$ correlations reparted by Jencks. The rate of semicarbazone formation at pH 5.4 show a relationship which is convex upward, resulting in a break in the curve but at pH 2.75, slight difference from a linear relationship. As a result of studying citric acid catalysis, second-order rate constants increase linearly with citric acid concentration and show a 2 times increase as the catalyst concentration is varied from 0.025 to 0.1 mol/1 at pH 2,9, but slight increase at pH 5.3. The rate-determining step is addition below pH 5 but is dehydration between pH 5 and 7. Conclusively, the rate-determining step of the reaction changes from dehydration to addition in respect to hydrogen ion activity near pH 5. The ortho: para rate ratio of the hydroxybenzaldehydes for semicarbazone formation is about 17 at $15^{\circ}C$. It is concluded that the results constitute strong evidence in favor of greater stabilization of p- than o-hydroxybenzaldehyde by substituent which donate electrons by resonance and is due to hydrogen bonding between the carbon-bound hydrogen of the-CHO group and the oxygen atom of the substituent.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.8-14
• /
• 2009

하이브리드 촉매를 이용하여 합성가스로부터 디메틸에테르(DME)를 1단계 공정으로 합성하였다. 하이브리드 촉매는 메탄올 합성반응을 위하여 Cu-ZnO-$Al_2O_3$, 메탄올 탈수반응을 위하여 aluminum phosphate 혹은 $H_3PO_4$-modified $\gamma$-alumina로 구성되었다. 제조한 촉매들은 XRD, BET, SEM, FT-IR, $NH_3$-TPD를 이용하여 특성분석을 하였다. XRD 분석을 통해 aluminum phosphate가 잘 합성되었음을 알 수 있었다. BET 분석을 통해 aluminum phosphate의 비표면적이 P/Al의 비에 따라서 달라짐을 확인할 수 있었다. 반응실험 결과 메탄올 탈수 촉매로 사용된 aluminum phosphate의 P/Al의 비가 1.2인 하이브리드 촉매에서 55%의 CO 전환율과 70%의 DME 선택도를 보여 주었다. $\gamma$-alumina를 인산으로 처리한 경우 촉매활성 감소를 막을 수 있었다. 하지만 85%의 진한인산으로 처리한 경우에는 촉매 활성 및 DME 선택도가 낮아짐을 확인할 수 있었다.

• 한국자기공명학회논문지
• /
• 제3권2호
• /
• pp.109-126
• /
• 1999

The location of Cu(II) exchanged into measoporous aluminosilicate MCM-41(AlMCM-41) material and its interaction with various adsorbate molecules were investigated by electron spin resonance and electron spin echo modulation spectroscopies. Cu(II) is fully coordinated to adsorbates in a wide open mesopore of AlMCM-41 for the formation of favorable complexes. It was found that in the fresh hydrated material, Cu(II) is octahedrally coordinated to six water molecules as evidenced by an isotropic room temperature ESR signal. This species is located in a cylindrical MCM-41 channel and rotates rapidly at room temperature. Evacuation at room temperature removes some of these water molecules, leaving the Cu(II) coordinated to less water molecules and anchored to oxygens in an MCM-41 channel wall. Dehydration at 450$^{\circ}C$ produces one Cu(II) species located on the internal wall of a channel, which is easily accessible to adsorbates. Adsorption of adsorbate molecules such as water, methanol, ammonia, pyridine, aniline, acetonitrile, benzene, and ethylene on a dehydrated Cu-AlMCM-41 material causes changes in the ESR spectrum of Cu(II), indicating the complex formation with these adsorbates. Cu(II) forms a complex with six molecules of methanol as evidenced by an isotropic room temperature ESR signal and ESEM analysis like upon water adsorption. Cu(II) also forms a square planar complex containing four molecules of N-containing adsorbates such as ammonia, pyridine and aniline based on resolved nitrogen superhyperfine interaction and their ESR parameters. However, Cu(II) forms a complex with six-molecules of acetonitrile based on ESR parameters. Only one molecule of benzene or ethylene is coordinated to Cu(II).

• 한국자기공명학회논문지
• /
• 제5권1호
• /
• pp.1-12
• /
• 2001

ZSM-5 gallosilicate molecular sieves was synthesized and cupric ion was ion-exchanged into the gallosilicate. The locations of Cu(ll) species in the framework and their interactions with various adsorbates were characterized by combined electron spin resonance(ESR) and electron spin echo modulation(ESEM) methods. It was found that in a fresh hydrated material, Cu(II) is octahedrally coordinated to six water molecules. This species is located in the channel intersections of two sinusoidal channels and rotates rapidly at room temperature. Evacuation removes some of these water molecules, leaving the Cu(II) coordinated to less water molecules and anchored to of oxygens in the channel wall. Dehydration produces two Cu(II) species, both of which are located in sites inaccessible to oxygen as evidenced by non-broadening of its ESR lines by oxygen. Adsorption of adsorbate molecules such as water, alcohols, ammonia, acetonitrile and ethylene on dehydrated CuNaH-ZSM-5 gallosilicate materials causes changes in the ESR spectrum of Cu(II), indicating the migration of Cu(II) into main channels to form complexes with these adsorbates there. Cu(II) forms a complex with two molecules of methanol, ethanol and propanol, respectively as evidenced by ESR parameters and ESEM data. Cu(II) also forms a square planar complex with four molecules of ammonia, based on the resolved nitrogen superhyperfine interactions and their ESEM parameters. Cu(II) forms a complex with two molecules of acetonitrile based on the ESR parameters and ESEM data. Interestingly, however, only part of Cu(II) interacts indirectly with one molecule of nonpolar ethylene based on ESR and ESEM analyses.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1957-1964
• /
• 2011

Various reaction conditions uding temperature, time and type and concentration of templates have been changed in order to facilely synthesize, especially with microwave (MW) heating, SAPO-34 molecular sieves. SAPO-34 molecular sieve can be synthesized rapidly with microwave irradiation from a gel containing tetraethylammonium hydroxide (TEAOH) as a template. However, other several templating molecules lead to SAPO-5 molecular sieve under microwave irradiation even though SAPO-34 is obtained by conventional electric synthesis from the same reactant gels. Moreover, SAPO-34 can be obtained more easily by increasing the TEAOH or silica concentration or by increasing the reaction temperature. SAPO-34 can be obtained within 5 min in a selected condition (high temperature of 210 $^{\circ}C$) with microwave heating, which may lead to a continuous production of the important material. SAPO-34 synthesized by microwave irradiation is homogeneous and small in size and shows acidity and a stable performance in the dehydration of methanol and 2-butanol to olefins, suggesting potential applications in acid catalysis.

• Bulletin of the Korean Chemical Society
• /
• 제25권11호
• /
• pp.1635-1640
• /
• 2004

The cyclophanes 1a-d containing two benzo[b]furan rings connected by various bridges have been prepared and their binding behaviors with N-benzylphenethylammonium cation 2 were examined by NMR titration method. The successive alkylation reactions of 4-hydroxyl groups and then 2-hydroxyl groups of 2,4-dihydroxybenzophenonse gave macrocycles 5a-c. Photoirradiation of the macrocycles 5a-c with 350 nm mercury lamp followed by dehydration afforded the cyclophanes 1a-c. Hydrolysis of two ester groups pendant on a bridge of 1b produced the carboxyl group-containing cyclophane 1d. The cyclophane 1a having a p-xylene bridge showed 1 : 1 binding with 2 with the binding constant of $36{\pm}6M^{-1}$ in 3 : 1 $CDCl_3$/methanol-$d_4$ solvent, while 1b and 1c which have neutral flexible bridges exhibited no appreciable binding with 2. The disodium salt of 1d showed much higher binding affinity for 2 forming 1 : 1 and 1 : 2 complexes.

• 한국식품과학회지
• /
• 제22권3호
• /
• pp.241-247
• /
• 1990

본 연구에서는 결명자로부터 손쉽게 음용 할 수 있는 인스턴트 차 제조방법과 인스턴트 차로써의 개발 가능성을 조사하여 보았다. 볶음 조건은 $170^{\circ}C$ 전후에서 3분 정도가 적당하였고 볶음은 결명자의 수분, 환원당, 지질함량을 감소시킨 반면 단백질, 가용성 무질소물. 회분함량 및 부피를 증가시켰고 추출속도와 추출효율을 증가시켰다. 물, methanol, ethanol의 추출 여액의 수율, 여과성, 박도 및 유효성분의 추출효율은 물$2{\sim}4$쪽 정도일 때 여액 수율과 여과성이 좋았다. 동결 건조물의 고형분은 50%의 결명자 ethanol 추출액(50%, v/v)에서 4.60%이었으며 일반성분 증에서 탄수화물이 제일 많고 환원당 함량은 12.65%이었고 rhein 과 emodin의 함량은 각각 1.40과 1.04% 이었다. 무기원소 함량은 Na(67.63)>Ca(51.01) >K (17.56)>Mg(15.43)>Fe(7.56mg%)순이었으며 유리당 함량은 raffinose>fructose>glucose>maltose>sucrose 순이었다. 건조물은 농갈색의 과립상의 형태로 약한 알로에 향이 가미된듯한 커피향을 가지며 흡습성과 caking성이 강한 것이 관찰되었다. Ethanol추출물의 동결건조제품과 분무 건조제품의 색, 맛과 냄새 및 개발가치에 대한 평가는 10점 만점에서 모두 8.0 이상으로 평가되어 인스턴트차로 개발할 가치가 있다고 판단된다.

• 대한화학회지
• /
• 제46권1호
• /
• pp.26-36
• /
• 2002

$MoO_3$와 H-SAPO-34의 고체상 반응은 상자기성의 Mo(V) 화학종을 띤다. 탈수하면 Mo(V) 화학 종이 약하게 나타나지만 계속적으로 활성화 시키면 ESR로 규명할 수 있는 $Mo(V)_{5c}$와 $Mo(V)_{6c}$와 같은 Mo(V) 화학종이 생성된다. ESR과 ESEM 자료들은 $(MoO_2)^+$나 $(MoO)^{3+}$ 같은 옥소-몰리브덴 화학 종을 보여준다. $(MoO_2)^+$ 화학 종이 다음과 같이 더 합리적인 것 같이 보여진다. H-SAPO-34는 낮은 골격전하를 갖기 때문에 높은 양전하를 갖는 $(MoO)^{3+}$는 쉽게 안정화 되지 못한다. 소성된 H-SAPO-34와 도데카몰리브덴 규산 용액 사이의 용액 상태 반응은 단지 $MoO^{2+}$ 화학 종만을 발생한다. 마름모형 ESR 신호는 $D_2O$, $CD_3OH$, $CH_3CH_2OD$와 $ND_3$를 흡착할 때 관측되었다. Mo(V) 화학 종의 배위구조와 위치는 트리 펄스 전자 스핀반향 자료로 측정하였다. MoH-SAPO-34에 메탄올, 에틸렌 암모니아와 물이 흡착될 때 3분자, 1분자, 1분자와 1분자가 $(MoO_2)^+$에 각각 직접 배위하였다.