• Computers and Concrete
• /
• v.34 no.1
• /
• pp.15-31
• /
• 2024

This study explores the failure mechanisms of 'I' shaped non-persistent cracks under uniaxial loads through a combination of experimental tests and numerical simulations. Concrete specimens measuring 200 mm×200 mm×50 mm were manufactured, featuring 'I' shaped non-persistent joints. The number of these joints varied from one to three, with angles set at 0, 30, 60, and 90 degrees. Twelve configurations, differing in the placement of pre-existing joints, were considered, where larger joints measured 80 mm in length and smaller cracks persisted for 20 mm with a 1 mm crack opening. Numerical models were developed for the 12 specimens, and loading in Y-axis direction was 0.05 mm/min, considering a concrete tensile strength of 5 MPa. Results reveal that crack starting was primarily influenced by the slope of joint that lacks persistence in relation to the loading direction and the number of joints. The compressive strength of the samples exhibited variations based on joint layout and failure mode. The study reveals a correlation between the failure behavior of joints and the number of induced tensile fracture, which increased with higher joint angles. Specimen strength increased with decreasing joint angles and numbers. The strength and failure processes exhibited similarities in both laboratory testing and numerical modeling methods.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.229-236
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection. which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the buckling problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The accuracy of the present element is demonstrated in the prediction of buckling loads and buckling modes of shells with multiple delaminations. The present shell element should serve as a powerful tool in the prediction of buckling loads and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.

• International journal of advanced smart convergence
• /
• v.13 no.3
• /
• pp.259-266
• /
• 2024

One of the most time consuming issues in a city development is the identification of suitable areas for urban infrastructures and proper land uses. Suitability analysis is the process and procedures to find the best available land in given area -that is, the ability of a system to select the needs of users in land use. This paper studied the usage of Geographic Information System technique and methods for the selection of the most appropriate sites for public park in the city of Gwangju. GIS was used as a standard technique to find the best available sites for development in urban areas. For this cause, digital elevation model and spatial data were used to produce different thematic layers by using software Idrisi. Criteria for finding the suitable site for park development were decided to evaluate the land and the followings 4 criteria were selected: on land with less than 3 degrees in slope, outside a 200m buffer around lakes, on land currently designated as forests, and 20ha or greater in size. To meet and measure each criterion, distance and context operators were applied to reclassify the importance of certain weight and Boolean images were generated to meet the criteria. These weights and maps has been combined using ArcGIS tools and the final map was prepared showing the most suitable sites. We may assist city planners and government officials in future development of public facilities including parks and related land use plans at urban level and act as to ensure proper land use planning and management of the urban areas.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.886-891
• /
• 2009

One of the important functions of prosthetic foot is the foot inversion-eversion which is so important when walking on uneven surfaces. The aim of our study was to evaluate the effect of foot eversion angle especially on knee and ankle joint for transtibial amputees by motion analysis. The experimental data were collected from three transtibial amputees and then ten healthy individuals. To simulate walking on side sloping ground, we used custom-made slope (5, 10, 15 degrees). Motion analysis was performed by 3-dimensional motion analyzer for 6 dynamic prosthetic feet. The results showed that knee abduction moments of amputated leg were decreased but those of sound leg were mainly increased as foot eversion angle increased. And ankle abduction moments of sound leg were inconsistent in magnitude and tendency between control and experimental group. Therefore foot eversioncharacteristics should be considered to develop advanced prosthetic foot.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.43-50
• /
• 2011

The only practical way to measure wind resource at high-altitude over 100 m above ground for a feasibility study on a high-rise building integrated wind turbine might be ground-based remote sensing. The remote-sensing campaign was performed at a 145 m-building roof in Jamsil where is a center of metropolitan city Seoul. The campaign aimed uncertainty assessment of Leosphere WindCube LIDAR and Scintec MPAS SODAR through a mutual comparison. Compared with LIDAR, the data availability of SODAR was about 2/3 at 550 m altitude while both showed over 90% under 400 m, and it is shown that the data availability decrease may bring a distortion of statistical analysis. The wind speed measurement of SODAR was fitted to a slope of 0.92 and $R^2$ of 0.90 to the LIDAR measurement. The relative standard deviation of wind speed difference and standard deviation of wind direction difference were evaluated to be 30% and 20 degrees, respectively over the whole measurement heights.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.69-72
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection, which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the eigenvalue problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The present shell element should serve as a powerful tool in the prediction of natural frequency and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.85-94
• /
• 2020

Equatorial noise, also known magnetosonic waves (MSWs), are one of the frequently observed plasma waves in Earth's inner magnetosphere. Observations have shown that wave amplitudes maximize at the magnetic equator with a narrow extent in their latitudinal distribution. It has been understood that waves are generated from an equatorial source region and confined within a few degrees magnetic latitude. The present study investigates whether the MSW instability and saturation amplitudes maximize at the equator, given an energetic proton ring-like distribution derived from an observed wave event, and using linear instability analysis and particle-in-cell simulations with the plasma conditions at different latitudes along the dipole magnetic field line. The results show that waves initially grow fastest (i.e., with the largest growth rate) at high latitude (20°-25°), but consistent with observations, their saturation amplitudes maximize within ±10° latitude. On the other hand, the slope of the saturation amplitudes versus latitude revealed in the present study is not as steep as what the previous statistical observation results suggest. This may be indicative of some other factors not considered in the present analyses at play, such as background magnetic field and plasma inhomogeneities and the propagation effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4691-4696
• /
• 2010

The This research paper deals with research on the 3D strip layout design of HEV UV terminal by utilizing the Cimatron Die Design, an automation module. To ensure smooth stamping of the product, strip layout was corrected for 33.5 degrees of slope, and blank layout of the double-width, 1-line, 1-pull out inner carrier was then optimized as a single arrangement. To mass-produce two different terminals from one common die, 3D strip layout design and die design were completed in 29 different processes.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.256-263
• /
• 2013

The field lysimeter study was undertaken to investigate influence of agricultural practice and topography on runoff and erosion loss of fluazinam from the sloped land grown pepper. The WP type formulation was applied on July in 2003~2005. The wash-off rates were from 1.4% to 8.4% of the applied fluazinam. The runoff losses of fluazinam from a series of pepper grown-lysimeter plots were 0.14~0.90% in the first year, 0.01~0.04% in the second year and 0.16~0.37% in the third year for the mulched contour ridge plots, 0.47~1.59% for the mulched up-down direction ridge plots and 0.07~1.05% for the no-mulched contour ridge plots as the control, and they increased with slope degree. Concentrations of fluazinam in runoff water ranged mostly to 10 ${\mu}gL^{-1}$ at the first runoff event. Erosion rates from plots except the mulched up-down direction ridge plots was 0.00~0.21% for 10% and 20% slope-plots and 0.15~1.05% for 30% slope-plots with different slope degrees. Erosion rates from the mulched up-down direction ridge plots were 0.47~1.59% for 10% slope-plots and 0.75~1.05% for 20% slope-plots. Residues of fluazinam in soil at ten days after the application ranged from 0.007 mg $kg^{-1}$ to 0.059 mg $kg^{-1}$ except the soil under the mulch. After then the fluazinam residue in soil was dissipated at the rate of 20 days of half-life to below 0.01 mg $kg^{-1}$ at 60 days after the application.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.357-365
• /
• 2006

The investigations were conducted to find out the situation of fertilizer use and the contents of soil chemical components on summer vegetable crops at 791 farmers' upland fields located in the parts of Gangwon-do, Gyengsangbuk-do and Jeollabuk-do of alpine area. Major vegetable crops were potato, Chinese cabbage, radish, carrot, onion, and cabbage. From the location surroundings cultivated alpine vegetable crops, the orders were Gangwon-do>Gyeongsangbuk-do>Jeollabuk-do part in the sizes of a fie1d area and the height above sea level, and Jeollabuk-do>Gyeongsangbuk-do>Gangwon-do part in the slope degrees. The soil texture was of wide distribution on sandy loam soil for Gangwon-do(76%) and Jeollabuk-do part(64%), and 1oam(42%) and sandy loam soil(35%) for Gyeongsangbuk-do part. From the numbers of investigated fields, the distribution of slope degree was wider than those of height above sea level in relation to location surroundings. The upland soils of 785 fields cultivated vegetable crops were sampled at 0~15 cm of top soil before seeding or transplanting and analyzed. On an average, pH, organic matter, available phosphate and exchangeable potassium, calcium, magnesium of soil were 5.7, $27.6g\;kg^{-1}$, $765mg\;kg^{-1}$, $1.16cmol_c\;kg^{-1}$, $6.1cmol_c\;kg^{-1}$, and $1.6cmol_c\;kg^{-1}$, respectively. The average cation exchange capacity(CEC) of 120 sites in Gangwon-do part was $9.2cmol_c\;kg^{-1}$. The content of organic matter, exchangeable potassium, exchangeable calcium and exchangeable magnesium was higher, while that of available phosphate was lower with slope degrees. And the content of major chemical components in carrot soil was lower in comparison with other crop soils. The average levels of N, $P_2O_5$, $K_2O$, livestock manure and lime fertilizer of 785 Belds applied by farmers were 335, 198, 244, 12,680 and $1,750kg\;ha^{-1}$, respectively, for summer vegetable crops in alpine area. The average amounts of $N-P_2O_5-K_2O$ fertilizers applied by farmers in 785 Gelds of vegetable crops were higher 1.7~2.0-4.2~7.0-1.4~2.0 times on potato, 1.4~1.6-4.6~8.3-3.5~4.2 times on Chinese cabbage, and 1.2~1.3-4.2~7.2-3.0~3.61 times on radish than the rates of NPK fertilizers based on soil testing for each crop.