• Asian-Australasian Journal of Animal Sciences
• /
• 제17권11호
• /
• pp.1582-1585
• /
• 2004

The antioxidative ability on the basis of reduced glutathione sulphydryl level, the inhibition activities of linoleic acid peroxidation of cell free extract of Lactobacillus spp. and the effects of types of media and growth phase of the cells on the cellular GSH level have been determined. Correlation between reduced glutathione sulphydryl level and antioxidative ability of Lactobacillus spp. was analyzed: Lactobacillus casei HY 2782 contained 25.15 $\mu$mole/g of GSH, the cellular GSH level of L. casei HY 2782 reached maximum after 24 h of cultivation and tended to decrease on further cultivation up to 72 h. There was a significantly higher level of cellular GSH when grown in de Man Rogosa and Sharpe (MRS) broth than in tryptone phytone yeast extract (TPY) broth or bromcresol pruple dextrose (BCP) broth (p<0.05). The antioxidant activity of cell free extract of Lactobacillus spp. have been shown to be significantly different among strains in the inhibition of linoleic acid peroxidation by thiobarbituric acid (TBA) test (p<0.01). L. casei HY 2782 and L. acidophilus ATCC 4356 revealed a high degree of antioxidative effect in linoleic acid oxidation system. Spearmans' rank correlation coefficient between inhibitory activity on linoleic acid peroxidation and cellular GSH levels of Lactobacillus spp. was 0.65, which means a significant positive correlation.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.1-1
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1.The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of ζ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.289-297
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1 The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of $\xi$ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• Journal of Magnetics
• /
• 제1권2호
• /
• pp.75-81
• /
• 1996

Study on the HDDr Characteristics of Nd16Fe76-xB8Zrx (x=0-2.0) Alloys and the Magnetic Properties of the HDDR Materials Nd16Fe76-xB8Zrx (where x=0-2.0) have been studied to see the effect of Zr addition on HDDR characteristics. A particular emphasis was place upon the anisotropy of the HDDR material. Anisotropy of the HDDR powder material has been evaluated by comparing the remanence values of the aligned sample measured along the aligning direction and the direction perpendicular to it. The HDDR characteristics of the alloys were investigated by means of DAT and TPA. Magnetic chracterisation of the HDDR processed materials was performed using a VSM and a TMA. The magnetic domain structure of the HDDR materials was examined by means of polarised microscope using a solid HDDR processed material. It has veen found that small addition (0.1 at %) of Zr to Nd-Fe-B-type alloy retards thedisproportionatio kinetics of the hydrogenated material. Desorption characteristic of the disproportionated materials has been found not to be affected significantly by the Zr addition. The Zr addition has been found to facilitate size of the powder. As the particle size decreases, the intrinsic coercivity decreases radically, and this is explained in terms of structural damage and/or oxidation caused during mechanical milling. It has also been found that the degree of alignment representing the anisotropic character of the HDDR powder is enhanced with decreasing particle size. Alloys with compositions based on

• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.131-138
• /
• 2023

The carbon felt is usually hired as electrodes for vanadium redox flow battery (VRFB). In the study, surface modification of carbon felt under CO₂ atmosphere with variables of operating various temperature ranges between 700℃ and 900℃. The qualitative and quantitative analysis were carried out such as scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) to observe degree of surface modification. Result of XPS analysis confirmed increase of carbon and oxidation functional group on the surface with increase of temperature. SEM image was discovered similar phenomena. Electrochemical characteristics such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) revealed the improved electrode performance with increase of temperature. However, the electrochemical performance under treatments temperature of 900℃ was less than that of under treatment temperature of 850℃ due to weight loss at the treatment temperature of 900℃. From the CV and EIS results, the best electrochemical characteristics was at the temperature of 850℃. That of at the temperature of 900℃ was decreased due to weight loss. The energy efficiencies (EE) obtained from full cell test were 69.37, 80.76, 82.45, and 75.47%, at the temperature of 700, 800, 850, and 900℃, respectively.

• 대한핵의학회지
• /
• 제3권2호
• /
• pp.23-27
• /
• 1969

Plasma glucose levels before and after oral glucose administration have been compared in a group of 76 thyrotoxic subjects and a group of 8 normal control subjects in order to study the effect of glucose loading in thyrotoxicosis. Following were the results: 1. The mean fasting plasma glucose level was elevated in the thyrotoxic group(95.5mg%) compared to normal control group (88mg%). 2. The peak of glucose tolerance curve is at 30 minutes after glucose administration in both groups, but its mean value was 44mg% higher in thyrotoxic group than in control group. 3. The plasma glucose levels returned towards the fasting level in the later stage of the test more rapidly in thyrotoxic group than in control group. 4. 69.6% of oral glucose tolerance tests were impaired in the thyrotoxic group, and the occurance of abnormal glucose tolerance could be related to the degree of thyrotoxicity, sex and age. 5. The mechanisms of the impaired glucose tolerance in thyrotoxicosis are thought to be related to an increased rate of glucose absorption from gastrointestinal tract, abnormal liver function with decreased hepatic glycogenesis, increased glucose oxidation, decreased pancreatic release of insulin, and genetic relationship between diabetes and thyrotoxicosis.

• Journal of Ginseng Research
• /
• 제8권2호
• /
• pp.124-134
• /
• 1984

Ginseng root starch, prepared by conventional method, contained crude lipid of 0.5%, crude protein of 0.4%, crude mineral of 0.17% and phosphorous of 12.5mg% as noncarbohydrate constituents. The amylose content of ginseng root starch picked in Summer (May to August) and Winter (November to March) was 32-35% and 15-20%, respectively, and it was decreased with a growing preiod of ginseng. The blue value, alkali number and ferricyanide number of the starch were 0.14-0.17, 8.50 and 0.781, respectively. The molecular weight of amylose in the starch was estimated to be 1.27-7.95${\times}$105 by means of periodate oxidation, and the degree of branching and glucose unit per segment of amylopectin were 3.50-3.53% and 28.3-28.5, respectively, The starch content of ginseng root was decreased when dried under sunlight and stored at 5$^{\circ}C$ for twenty days. In contrast, sucrose content in the root was increased from 3.8% in fresh state to 11.5% during storage at the above condition. In the other hand, starch was converted to maltose by heating at temperature above 70$^{\circ}C$.

• 한국자동차공학회논문집
• /
• 제8권2호
• /
• pp.64-71
• /
• 2000

In order to clarify the characteristics of soot formation and oxidation in-cylinder of a diesel engine, it is necessary to diagnose accurately for combustion of in-cylinder. The past techniques for soot measurement have limitations in providing the characteristics of soot in a diesel engine, whereas, laser-based 2D imaging diagnostics have the potential to provide better temporally and spatially resolved measurements of the soot distribution. We rebuilt an optically accessible diesel engine which is similar to the conditions of a conventional engine and tried to measure soot distribution in a cylinder of the diesel engine using laser induced scattering(LIS) and laser induced incandescence(LII). Some results were acquired in this study. LIS and LII signal that show soot distribution of a in-cylinder were taken by ICCD properly. The signal of LIS was intenser than that of LII. Although they have some differences of signal intensity in early combusion period, both of signals show that they are generally similar in late combustion period, after ATDC 50 degree.

• Fisheries and Aquatic Sciences
• /
• 제25권2호
• /
• pp.64-75
• /
• 2022

This study aimed to investigate the effect of different coating materials on the quality of shrimp (Litopenaeus vannamei) during chilled storage for 10 days. Fresh shrimp were randomly divided into five groups: the control group, the hypotaurine treatment group (2%), the chitosan group (1%), the hypotaurine + chitosan group (2% hypotaurine solution with 1% of chitosan), and the sodium metabisulfite treatment group (1.25%). Compared with other treatments, the lower accumulation of total visible counts (TVC, 5.25 Log₁₀ CFU/g), total volatile basic nitrogen (TVB-N, 22.5 mg/100 g) and thiobarbituric acid values (TBA, 0.58 mg MDA/kg) suggested that coating of chitosan-hypotaurine could retard the microbial activity, protein degradation and lipid oxidation of shrimp. Meanwhile, results demonstrated that the chitosan coating combined with hypotaurine showed an excellent performance in inhibiting quality deterioration (pH 7.5, ∆E 7.0, hardness 393 g, and elasticity 0.69). Furthermore, the melanosis degree of shrimp was alleviated, and the sensory parameters, including appearance, odor and texture, were maintained to the acceptable level by chitosan based hypotaurine treatment during the chilled storage.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.740-748
• /
• 1998

The inertia friction properties of C/C composites manufactured by the processes of pressure and at-mospheric carbonizaton with a commerciallized and two kinds of modified coal-tar pitch as a matrix pre-cursor were investigated. The modifications of a pitch such as the introduction of mesophase and the ad-dition of sulphur into a raw pitch were not effective for a impregnation efficiency conducted in a vacuum and at the same time in a pressure of 5kg/cm2 due to the increase of the pitch viscosity. There was not a difference in the densification increment between the pitch modifications however it was revealed that a pressure carbonization was more advantageous than an atmospheric in the densification and the formation of anisotropic carbon matrix. The friction and wear propertis of C/C having higher degree of matrix cry-stallization higher density and hardness of friction surface showed superiority. As the braking energy was increased the friction coefficients were decreased and reached almost same level at the high kinetic energy of 99.6kJ. The wear trends at 99.6kJ were different from the behaviors of friction ceofficient under the same energy in which an oxidation wear is being considered along with a mechnical wear although the wear rates were almost similar to the friction coefficient at the low energy.