• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.608-616
• /
• 1996

To propose the use of skipjack processing by-product(SPB) as a food material, the optimal condition for the production of the SPB hydrolysate through enzyme treatment was obtained using RSM(Response Surface Methodology). Among eight pretenses test, Pretense $P^{TM}$ was screened primarily on the aspect of production cost and taste of the product. The extent of autolysis accompanied by endogenous enzyme in the SPB was almost negligible as compared with that of Protense $P^{TM}$ treatment. The derived model equation was within the satisfiable range as indicated by coefficient of $determination(R^2=0.9460)$ and lack of fit(p>0.1) values. From the results of RSM and ridge analysis, the conditions favoring the higllest degree of hydrolysis were: PH 7.2, $51^{\circ}C,$ reaction time of 3.94 hr, substrate concentration of 33.3%, and enzym $e_strate ratio of 0.48%.48%.8%.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.2
• /
• pp.103-108
• /
• 1998

A hydrophobic substrate triolein was hydrolyzed by lipase in a mono-phase reaction system containing cyclodextrin(CD) as emulsifier. The triolein was transformation to an emulsion-like state in the CD containing reaction system in contrast to the oil-droplet like state without CD due to the formation of an inclusion complex between the lipids and CDs. The hydyrolysis reaction increased substantially in the CD containing reaction system, and the optimum reaction conditions including the amount of lipase, ${\beta}$-CD concentration, and mixing ratio of triolein and ${\beta}$-CD, were determined. The performance of the enzyme reaction in a mono-phase reaction system was compared with that of a two-phase reaction system which used water immiscible hexane as the organic solvent. The role of a CD in the mono-phase reaction system was elucidated by comparing the degree of the inclusion complex formation with triolein and oleic acid, Km and Vmax values, and product inhibition by oleic aicd in aqueous and CD containing reaction systems. The resulting enhanced reaction seems to be caused by two phenomena; the increased accessibility of lipase to triolein and reduced product inhibition by oleic acid through the formation of an inclusion complex.

• The Korean Journal of Zoology
• /
• v.13 no.3
• /
• pp.75-84
• /
• 1970

Gamma-radiolyses of oxygenated and deoxygenated glycylglycylclycine in aqueous solution and in the solid state are observed, with special regards to peptied bond rupture for elucidation of radiolytic mechanism of proteins, by means of chromatorgraphic separation of degradation products, spectrophotometric quantitation of carbonyl compounds, micro-titration of amide formation, infrared spectrophptometry, and ultraviolet spectrophotometry for evaluation of radiation damage. Essential difference of peptide bond rupture is observed in solution and in the solid state, being high in the former and negligible in the latter. On the other hand, the presence of and obsence of oxygen in solution during irradiation are not so significant with respect to peptide bond rupture, except the recombination of free-radicals produced in deoxygenated solution. Peptide bond rupture in solution is attributable to the mechanisms proposed by Garrison et al.; dehydrogenation followed by hydrolysis to yield acid amide and carbonyl function as found on the basis of radiolytic products. Peptide bond attack at $\\alpha$-carbon locus might be suggestive for irradiated solid but not significant in view of low degree of peptide bond rupture.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.663-667
• /
• 2011

This study was performed to measure the angiotensin I-converting enzyme (ACE) inhibitory activity of peptide extracts derived from the enzymatic proteolysis of Hanwoo Musculus longissimus (M. longissimus) during cold storage. Thermolysin (80 ppm, w/w) and protease type XIII (100 ppm, w/w) were injected separately or in combination for the enzymatic proteolysis of sarcoplasmic and myofibrillar proteins prior to storage at $5^{\circ}C$ (T1) or at $-1^{\circ}C$ (T2) in a chilling room for 9 days. Beef injected with thermolysin (E2) and thermolysin+protease type XIII (E3) showed a significantly higher degree of hydrolysis at both storage temperatures (p<0.05). During the storage period, T1E2 at day 6 and T1E3 at day 9 showed the strongest ACE inhibitory activity with sarcoplasmic and myofibrillar protein proteolysates. Macromolecules greater than 10,000 Da were removed by ultra filtration, and the filtrates were separated into fractions using gel filtration. Five and three major fractions were collected from S-T1E2-6 and M-T1E3-9 extracts, respectively, and the $4^{th}$ fraction of the S-T1E2-6 extracts showed the highest ACE inhibitory rate of $61.96{\pm}7.41%$.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.380-385
• /
• 2016

Nanocelluloses, mainly cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC, i.e., defect-free, rod-like crystalline residues after acid hydrolysis of fibers), have been the subject of recent interest. Due to the presence of hydroxyl groups on the surface of nanocelluloses, their surfaces are reactive, making them suitable candidates for reinforcing materials for manufacturing polymer composites. In this study, CNF was used as a reinforcing material for manufacturing cement composites. CNF was prepared by TEMPO (2,2,6,6,-tetramethyl piperidine-1-oxyl radical) oxidation procedure combined with extensive homogenization and ultrasonication. Transmission electron microscopy (TEM) analysis of the suspension showed the width of CNF between 10 and 15 nm. The compressive strength of cement composites containing 0.5% CNF was comparable to that of conventional cement composites. On the other hand, the tensile and flexural strength were improved by 49.7% and 38.8%, respectively, compared to those of conventional cement composites. Also, at an ambient condition, the degree of self-shrinkage reduction reached to 18.9% in one day, followed by 5.9% in 28 days after molding.

• Food Science of Animal Resources
• /
• v.40 no.2
• /
• pp.155-171
• /
• 2020

Fermented products, including sausages, provide several health benefits, particularly when probiotics are used in the fermentation process. This study aimed to examine the cytotoxicity (against Caco-2 and MCF-7 cell lines), antihypertensive activity via angiotensin-converting enzyme (ACE) inhibition, antioxidant capacity, antidiabetic activity via α-amylase and α-glucosidase inhibition, proteolysis rate, and oxidative degradation of fermented camel and beef sausages in vitro by the novel probiotic Lactococcus lactis KX881782 isolated from camel milk. Moreover, camel and beef sausages fermented with commercial starter culture alone were compared to those fermented with commercial starter culture combined with L. lactis. The degree of hydrolysis, antioxidant capacity, cytotoxicity against Caco-2 and MCF-7, α-amylase, α-glucosidase, and ACE inhibitory activities were higher (p<0.05) in fermented camel sausages than beef sausages. In contrast, the water and lipid peroxidation activity were lower (p<0.05) in camel sausages than beef sausages. L. lactis enhanced the health benefits of the fermented camel sausages. These results suggest that camel sausage fermented with the novel probiotic L. lactis KX881782 could be a promising functional food that relatively provides several health benefits to consumers compared with fermented beef sausage.

• Applied Biological Chemistry
• /
• v.35 no.5
• /
• pp.339-345
• /
• 1992

In order to enhance the processing quality and utility of alaska-pollack meat, the optimum conditions for the preparation of pronase hydrolysate and the synthesis of plastein were investigated. The optimum temperature and pH for the hydrolysis of alaska-pollack by pronase were $40^{\circ}C$ and pH 7.0. The reaction time and enzyme concentration were 4 hr and 1,000 units per g of substrate. Under the above optimum conditions alaska-pollack was hydrolyzed by pronase yielding a hydrolytic degree of about 89%. Pronase hydrolysate was employed as substrate for plastein synthesis. The 30% pronase hydrolysates were adjusted to pH 7 for fruit-bromelain and pH 5 for stem-bromelain, and then plastein were synthesized by 1% bromelain at $40^{\circ}C$ for 24 hr. The plasteins synthesized by fruit- and stem-bromelain were consisted of peptides having average peptide length of 22.6 and 20.8 under the optimum synthetic conditions. The plastein synthesis reaction reduced considerably the bitterness of pronase hydrolysate.

• Microbiology and Biotechnology Letters
• /
• v.7 no.3
• /
• pp.141-147
• /
• 1979

Naringinase from Atpergillus nidulans was immobillized on DEAE-Sephadex A-25 and its characteristics were studied. The optimal conditions for the preparation of the immobilized enzyme were as follow; optimal pH, incubation time and the suitable amount of enzyme were 6.0, 30 min. and 110 units per gram of the dried ion exchage resin, respectively. The optimal pH of the immobilized enzyme was higher than that of the native enzyme. The optimal temperature increased from 4$0^{\circ}C$ to 5$0^{\circ}C$. The heat and pH stability of the immobillized enzyme were better than those of the native enzyme. No significant difference in the Michaelis constant was detected. Activation energy of the immobilized enzyme was 7.96 Kcal/mole, and the apparent Michaelis rate equation was used to describe the action of this material. The degree of hydrolysis was dependant on the flow rate at low rate of perfusion through the column. As the flow rate increased, the value of the apparent Km decreased.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.178-191
• /
• 2003

OMC is essentialiy necessary compound in sun goods as organic UV protecting products. But the skin-trouble problem is raising because of skin penetration of OMC. In this study, non-capsulated pure OMC was compared with Organic-Inorganic-Nano-hybrid OMC for skin penetration force and SPF degree. Organic- Inorganic Nano-Hybrid OMC is OMC trapped in the pore of the mesoporous silica synthesized by the sol-gel method after OMC is nanoemulsified in the system of the hydrogenated Lecithin/ Ethanol/caprylic/capric triglyceride/OMC/water. OMC- nano- emulsion was obtained by a microfluidizing process at 1000bar and then micelle size in the nanoemulsion solution is 100-200nm range. Mesoporous silica nano-hybrid OMC was prepared by the process; surfactant was added in dissolved OMC-Nanoemulsion, then the rod Micelle was formed. OMC-nanoemulsion was capsulated in this rod Micelle and then silica precursor was added in the OMC-nanoemulsion solution. Through the hydrolysis reaction of the silica precursor, mesoporous silica concluding OMC-Nanocapsulation was obtained. The nano-hybrid surface of this OMC-Nanoemulsion-Inorganic system was treated with polyalkyl-silane compound. OMC-Mesoporous silica Nano-hybrids coated with polyalkyl-silane compound show the higher sun protecting factor (SPF Analyzer: INDEX 10-15) than pure OMC and could reduce a skin penetration of OMC. The physico-chemical properties of these nano-hybrids measured on the SPF index, partical size, strcture, specific surface area, pore size, morphology, UV absorption, rate of the OMC dissolution using SPF Analyzer, Laser light scattering system, XRD, BET, SEM, chroma Meter, HPLC, Image analyzer, microfluidizer, UV/VIS. spectrometer.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.207-213
• /
• 1998

In order to fabricate ideal powders, new processing is necessary in which the solute atoms in solution rapidly move to mix each other to the degree of molecular level, the viscosity of solution should be low not to effect the moving of solute atoms, and the powders could be directly obtained as crystalline. Supercritical fluid is defined as condensed gas state up to its critical pressure and temperature. In this paper, supercritical fluid methods were studied as a new ceramic processing of powder preparation. The crystalline anatase powders of $TiO_2$ which are useful for photocatalyst materials were fabricated by hydrolysis of titanium(IV) ethoxide using water which was ethanol as a supercritical fluid.