• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.249-249
• /
• 2009

We have grown large area BSTO($(Ba_{1-x}Sr_x)TiO_3$) thin films (x=0.4) on 2 inch diameter MgO (001) single crystal substrates using a pulse laser deposition(PLD) system. Substrate temperature and oxygen pressure in the deposition chamber, and the laser optics for ablating a target have been controlled to obtain the uniform thickness and preferred orientation of the films. Results of x-ray diffraction and rocking curve analysis revealed that the BSTO films were grown on MgO substrates with a preferred orientation (002), and the full width half maximum of the rocking curve was measured to be 0.86 degree at optimum condition. Roughness of the films have been measured to be $3.42{\AA}$ rms by using atomic force microscopy. We have successfully deposited the large area BSTO thin films of $4000{\AA}$ thickness on 50 mm diameter MgO substrates.

• The Journal of the Korea Contents Association
• /
• v.7 no.8
• /
• pp.102-108
• /
• 2007

Among culture industry that greet digital generation and is observed 21th century the most representative game industry latest is caught what and more interest degree is rising. 2D and 3D animation accomplish continuous growth and development depending action expression along with development of computer technology, and 2D and 3D animation practical use extent are trend that is widening the area in TV, movie, GAME industry etc. through computer hardware and fast change of software technology. The trend of latest game graphic is trend that the weight is changing from 2D to 3D by 3D game and activation of 3D game character that raise player's immersion stuff and Control in 2D's simplicity manufacturing game balance for one side. This treatise that is reality of 3D game character to classify kind of (Motion Capture) and 3D character animation, form model the sense put. Recognize that is overview and reality of 3D game character first for this about example, and is considered to efficiency is high game industry and digital contents industry hereafter by proposing kind model classification of 3D game character animation, form model classification data and character animation manufacture process that application is possible at fast time and effect in 3D character animation application are big.

• International Commerce and Information Review
• /
• v.19 no.4
• /
• pp.127-145
• /
• 2017

The study focuses on the ICT industry, which is considered future growth engine. Tthe main objective of the research is to examine the extent of the competitiveness of the Chinese ICT industry, which is rapidly emerging as a competitor of the ICT industry in Korea. The ICT items subject to primary analysis of this study were computer and peripherals items. Analysis methods used were MSI (Market Share Index), EBI (Export Bias Index), and MCA (Market Comparative Advantage). The analysis period was from 2008 to 2016, and the analysis dater used were the export-import data provided by KITA. According to the study, Korean market share of Chinese computers and peripherals items has continued to increase, exports concentrated on the Korean market are intensifying, though the degree of competitiveness gained by the Korean market is quite strong. In particular, 852851, 847160 items have the largest competitiveness in the Korean market compared to other items used in this study. The implications of this study for the Korean market are as follows: i) improvement of quality with price ii) convergence product development between computer and peripherals items and consumer -friendly design development, and iii) marketing efforts to improve product awareness so that consumers recognize Korean computer and peripherals products.

• The Journal of Small Business Innovation
• /
• v.19 no.3
• /
• pp.57-74
• /
• 2016

This paper analyzes the role of strategic fit, cooperation, and performance in small-sized subpart suppliers' interactions with large businesses. For this purpose, this paper analyzes survey data from 90 first-tier suppliers of Samsung Electronics and evaluates how strategic fit and cooperative relationships affect their performance. Empirical analysis suggests that strategic fit positively affects small companies' business and innovation performance. This finding aligns with theories arguing for strategies that accommodate specific business environments. In addition, strategic fit is crucial for innovativeness of SMEs (Small and Medium-sized Enterprises). With regard to forming relationships with large companies, findings also show that high quality technological and personnel cooperation boosts subpart suppliers' productivity and efficiency as notably reflected in SMEs' business performance. Moreover, such cooperation between small and large companies reinforces the benefits associated with strategic fit and innovation. This means that if the business environment of small-sized subpart suppliers is uncertain, harnessing differentiated strategies and pursuing collaborations with prime companies will produce innovative outcomes (e.g., increased patent publications). On the other hand, when degree of uncertainty is small, pursuing cost leadership strategies and collaborating with prime companies in areas, such as technology and personnel, will help small-sized subpart suppliers produce innovative outcomes. Based on these findings, this paper argues that choosing the right competitive strategy for a specific business context is intrinsically tied to (1) augmenting technological and human collaborations with prime companies, (2) improving the quality of these interactions, and (3) generating competitiveness among small subpart suppliers. Both competition and cooperation are necessary for strengthening the competitiveness of small companies.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.794-799
• /
• 2005

With the quantitative growth of the petroleum industry, the pipe facilities that connect each process increased significantly and the corresponding maintenance and repair costs of the pipe facilities increased as well. The diagnosis techniques to check a pipe efficiency while in operation are few in Korea, but in the advanced countries the pipe diagnosis using gramma-ray source was on-going research since 1960's. In this study, field experiments were performed to analyze the reasons for abnormal operation of the pipe connected to a distillation tower, and the degree of abnormality was estimated using a sealed gamma-ray source ($^{137}Cs$). Gamma radiation counts were measured by a detector (NaI) positioned outside the pipe-wall diametrically opposite to the gamma source. The results showed that a gas zone section's distribution pattern was different from the pattern of nearby fluid in a pipe. Th diagnosis technique using a gamma radiation source was proved to be an effective and reliable method, offering the information on the fluid distribution in pipe.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.39-44
• /
• 1989

This experiment was conducted to mature newly reclaimed upland and to increase soybean yield at this upland, Kim Jae, Jeon Buk, Koera from 1987 to 1988. Lime, lime-magnesium and calcium sulfate were applied with two, levels, amount of lime requirement, and 1.5 times of lime requirement. The results were summarized as follows: 1. The yields of soybean among treaments were in order of lime-magnesium 1.5 times, lime 1.5 times, lime-magnesium, calcium sulfate, lime and control with significancy at 1% level. 2. Correlations between yield components and inorganic element contents (T-N, $P_2O_5$, CaO and MgO) in plant at flowering stage were positive, but manganese in plant was negative at 5%, respectively. 3. Correlations, between yields and MgO and CaO contents in plant at flowering stage were positive, but Mn in plant was negative at 5% respectively. 4. Inorganic element contents of the soils at flowering stage were higher than those of before experiment. Correlation between yield and base saturation degree in soil at flowering stage was positive at 5%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.43-50
• /
• 2007

Veterinary antibiotics have been widely used to increase feed efficiency, to prevent disease, and to promote growth as well as to control disease. The antibiotics administered can be excreted through the urine and feces. One of the major routes of veterinary antibiotics entering soil and water environment is via the application of animal manure to agricultural land as an organic fertilizer source. Since little is known about impacts of antibiotics on the environment, this study was conducted to prioritize the veterinary antibiotics based on the consumption and potential to reach the environment. Among 83 veterinary antibiotics consumed in Korea, ten antibiotics were used at the greater dose than 25 Mg in 2004. Potential to reach the environment was determined according to excretion rate after administered to animals and sorption affinity to soil solids after applied to agricultural land. Seventeen antibiotic active ingredients (Ais) were classified as 'High' priority in terms of the potential to reach the environment. An overall priority score was determined by combining priority score based on consumption with the degree of potential environment exposure. Twenty veterinary antibiotic AIs were classified as 'Very high' or 'High' priority requiring detailed assessment. The antibiotic AIs were identified four aminoglycosides, two macrolides, two penicillins, five sulfonamides, three tetracyclines, two quinolones, and two miscellaneous. Eight veterinary antibiotic AIs including amoxicillin, carbadox, chlortetracycline, neomycin, oxytetracycline, sulfamethazine, sulfathiazole, and tylosin were identified to have a greater priority of environmental risk in Korea.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.1-18
• /
• 2021

ICT is the main driving force of Korea's economic growth. Korea has the world's best ICT competitiveness, and several policies are being implemented to maintain it. However, for successful policy implementation, it is crucial to understand ICT trends accurately. Therefore, this study analyzes the trends of 18 core technologies in the ICT field. In particular, the degree of scientific development and commercialization by technology are investigated through research paper analysis and patent analysis, respectively. Then, the trends shown by document type are compared based on the two analysis results. As a result, artificial intelligence and virtual reality are at the stage where commercialization is actively taking place after scientific development, and at the same time, since research is being conducted, it is expected to develop continuously. On the other hand, quantum computer and implantable device are in the basic research stage. It is necessary to understand the current research status and determine the direction of future support. The results of the ICT trend analysis conducted in this study can be used as a criterion for determining the future direction of Korean policy.

• Journal of Life Science
• /
• v.23 no.1
• /
• pp.116-124
• /
• 2013

The aim was to examine resistance exercise-related genes after 8 weeks of resistance training. Thirty-two male Sprague-Dawley rats were divided into four groups: 4 weeks sedentary (4 wks CON, n=8), 8 weeks sedentary (8 wks CON, n=8), 4 weeks exercise training (4 wks REG, n=8), and 8 weeks exercise training (8 wks REG, n=8). The rats were trained to climb a 1-m vertical incline (85-degree), with weights secured to their tails. They climbed 10 times, 3 days per week, for 8 consecutive weeks. Skeletal muscle was taken from the flexor halucis longus after the exercise training. After separating the total RNA, large-scale gene expression was investigated by beadarray (Illumina RatRef-12 Expression BeadChip) analysis, and qPCR was used to inspect the beadarray data and to analyze the RNA quantitatively. The detection p-value for the genes was p<0.01, the M-value {M=$log_2$(condition)-$log_2$(reference)} was >1.0, and the DiffScore was >20. In total, the expression of 30 genes significantly increased 4 weeks after the exercise training, and the expression of six genes decreased. At 8 weeks, the expression of five genes significantly increased and that of 12 decreased. Several genes are potentially involved in resistance exercise and muscle hypertrophy, including 1) regulation of cell growth (IGFBP1, PLA2G2A, OKL38); 2) myogenesis (CSRP3); 3) tissue regeneration and muscle development (MUSTN1, MYBPH); 4) hypertrophy (CYR61, ATF3, NR4A3); and 5) glucose metabolism (G6PC, PCK1). These results may help to explain previously reported physiological changes of the skeletal muscle and suggest new avenues for further investigation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.253-264
• /
• 2012

This study was carried out to investigate growth characteristics, yield, chemical compositions and nutrients yield of corn hybrids for silage in the newly reclaimed hilly land. The experimental design was arranged in a randomized block design with three replications. The seeding time was at May 6. The harvest time of four treatments was milk stage (97 days), dough stage (105 days), yellow stage (112 days) and late yellow stage (119 days after seeding). Plant height, ear height, leaf numbers and ear length were highest in yellow stage (p<0.05, 0.01), but dead leaf, stem hardness and sugar degree (Brix) were higher in late yellow than other treatments. Leaf width, tip filling degree and fresh yield were not significantly different. Dry matter yield increased as the maturity stage progressed (p<0.01). Crude protein and crude fat were not significantly different. NDF and ADF decreased as the maturity stage progressed (p<0.01). Ca content was the highest at milk stage (p<0.05), Fe and P were the highest at dough stage (p<0.05, 0.01). However another minerals were not significantly different. Essential amino acid (EAA), nonessential amino acid (NEAA) and total amino acid were highest at yellow stage, but no significant differences were found among the treatments. Total free sugar contents were higher in the order of Milk > dough > yellow > late yellow stage, but no significant differences were found among the treatments. Crude protein yield was the highest at yellow stage, but crude fat yield, amino acid yield and TDN yield were highest at late yellow stage (p<0.01). Total mineral yield showed no significant difference. Based on the above results, yellow and late yellow stage compared to other maturity stage have been shown to increase dry matter yield and nutrients yield, when silage corn grow cultivate in the newly reclaimed hilly land.