• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.47-55
• /
• 2000

Non-linear behavior of rock under compression can be predicted by a crack model. Crack growth in rock renders rock anisotropic. The degree of anisotropy is explained in terms of elastic moduli as a function of load level. In this study, we calculate the changes of elastic moduli due to crack growth numerically by using a crack model and compare these values with experimental results obtained from the measurement of ultrasonic wave velocities. Image processing technique is used to obtain the initial crack information needed for the numerical calculation of elastic moduli.

• KSBB Journal
• /
• v.6 no.4
• /
• pp.363-368
• /
• 1991

PVA degrading bacteria were isolated from water system, and identified as Pseudomonas cepacia and Pseudmonas pseudomallei, which were named as Pseudomonas sp. G5Y and Pseudomonas sp. PW. It was found out that those two kinds of bacteria have a symbiotic relationship to degrade PVA. For the mixed culture of these bacteria, the optimal conditions of pH, temperature, nitrogen source, and polymerization degree of PVA were found to be 7.5, $35^{\circ}C$, ammonium sulfate, and 500, respectively. Also, the growth of these bacteria was promoted by trace elements such as vitamin B1, B12, pyridoxine, and p-aminobenzoate, respectively. The specific growth rate of mixed bacteria was inhibited when the concentration of PVA was more than 20g/l. The substrate inhibition kinetics of the mixed culture was $${\mu}=\frac{0.065S}{2.56+S+(S^2/156}hr^{-1}$

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.247-255
• /
• 2016

In order to select a strain that forms a Biocellulose (BC), strain producing acetic acid was selected from commercially available kombucha. Through SM broth it was confirmed that the strain is a gram negative bacteria in the form of rods having no motility through a phase contrast microscope. The result of phylogenetic inference analysis based on 16S rDNA sequence analysis for the identification of strains was most closely related to Gluconobacter uchimurae (G. uchimurae) and was named G. uchimurae GYS15 strain. The strain showed the highest degree of growth when cultured for 14 days under the conditions of pH 5 and $25^{\circ}C$. Moreover, it showed the highest degree of growth in a Glucose addition disaccharide as the optimum carbon source sucrose and fructose. Also, 0.5% NaCl, upon the addition of Malto extract, showed the highest degree of growth. Based on investigation by the optimum growth conditions to confirm the physical properties of BC obtained by culturing G. uchimurae GYS15 strains. The surface structure was observed through an scanning electron microscope (SEM) showed a high networks structure. It until $8.6{\pm}0.38$ times when the water holding capacity is re-absorbed and re-absorbed holding oil up to $6.6{\pm}0.51$ times confirmed. In conclusion, using these material properties, it was possible to confirm the possibility of a variety of cosmetic materials and mask pack materials.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.301-308
• /
• 2000

Non-linear behavior of rock under compression can be predicted by a crack model. Crack growth in rock renders rock anisotropic. The degree of anisotropy is explained in terms of elastic moduli as a function of load level. In this study, we calculate the changes of elastic moduli due to crack growth numerically by using a crack model and compare these values with experimental results obtained from the measurement of ultrasonic wave velocities. Image processing technique is used to obtain the initial crack information needed for the numerical calculation of elastic moduli.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.3-11
• /
• 1996

To investigate the effect of fatigue crack growth due to the surface residual stress, it is measured the residual stress distribution by x-ray diffraction at the crack tip each constant crack growth in the notch specimens, and quantitively assessed the effect of crack closure caused to the distribution of compressive stress at the crack tip from evaluating crack openning stress using the finite element analysis. It is concluded that the degree of the residual stress distribution at the crack tip is decreased with increasing the crack length. From the fact that it is similar to the crack openning stress ratio, it is found that the compressive residual stress distribution and size is related to the crack closure effect and surface residual stress field with propagating crack in the notch specimens depends on the stress intensity factor range at the crack tip.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.4
• /
• pp.1-12
• /
• 2008

The study suggests an answer to the question of what determines category diversification of Internet portals in Korea. First, as external factors, competition intensity and market growth are hypothesized to have influence on the degree of category diversification. Second, an internal factor, user loyalty to portals, is hypothesized to influence negatively category diversification. The study performed empirical analysis based on weekly portal-specific panel data of eighteen internet portals in Korea during the period between 2001 and 2004. The result shows that category diversification increases as competition intensity increases, and that category diversification decreases as user loyalty increases. There was no effect of market-level growth rate on category diversification.

• 보존과학연구
• /
• s.17
• /
• pp.48-64
• /
• 1996

We compared the degree of color difference formed by environmental factor(temperature, relative humidity) with fungal growth in order to know how to change the color difference of cellulolutic cultural properties such as Korean papers, cotton, jute and hemp. We concluded, from the result, that the action of fungal growth on celluloytic cultural properties was more hamful than environmental factor. We considered the secretion produced by fungi as the causative agent for stained formation on cellulolytic cultural properties. Alternaria sp. colored allmaterials greyish black, Chaetomium sp. colored cotton and hemp orange, and Penicllium sp. colored cotton, jute and hemp yellowish green. But Trichoderma sp. and Aspergillus sp. didn't show a clear color against each material. It was observed that thymol(120g/$m^3$) was the most effective fungicide to prevent fungal growth.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.6
• /
• pp.528-534
• /
• 2005

Angiogenesis is important for the growth and metastasis of solid tumors. Some growth factors, inflammatory cytokines, and angiogenin are known to promote tumor angiogenesis. Among them, Vascular endothelial growth factor (VEGF) is the most intriguing factor in regard to tumor angiogenesis. Inhibition of VEGF activity by neutralizing antibodies or by the introduction of dominant negative VEGF receptors into endothelial cells of tumor-associated blood vessels resulted in the inhibition of tumor growth and in tumor regression, indicating that VEGF is a major initiator of tumor angiogenesis. VEGF promotes angiogenesis through their receptors, Flt-1 and Flk-1/KDR. on vascular endothelial cells. These two receptors were usually believed to be expressed specifically on vascular endothelial cell. Several reports have now shown that VEGF is not only significantly associated with microvessel density but also has prognostic value in both node-negative and node-positive oral squamous cell carcinoma. For many years several histologic features of the neoplasms are being considered when assessing the influence of malignancy grading on recurrence and prognosis. Among the characteristics investigated, degree of keratinization, nuclear pleomorphism, mode of invasion, microscopic depth of invasion, intravascular invasion, lymphocyte infiltration, and number of mitoses have been considered as important prognostic factors. So, this study was conducted to evaluate the correlation of vascular endothelial growth factor expression with malignancy in paraffin-embedded biopsy specimens from 11 patients with tongue cancers. Our results showed that high immunoreactivity specimens of VEGF expression were significantly lower keratinization degree and more pronounced nuclear pleomorphism than in low immunoreactivity specimens. Thus, VEGF expression could be used as a prognostic marker in tongue cancer.

• Journal of Environmental Science International
• /
• v.28 no.8
• /
• pp.655-667
• /
• 2019

This research aims to identify the possibility of developing A horizon resources that can be used for construction and civil engineering work. As such, the utility of A horizon resources was examined by establishing planting ground through a mixture of soil layers and by analyzing the growth and development of Pinus densiflora. The physicochemical and physical properties of the soil were as follows: the A horizon was sandy clay loam, B horizon was sandy loam, and the mixture of two layers appeared as sandy loam, which was identical to the B horizon. The experimental groups did not show any significant difference in their physical properties of porosity and degree of water-stable aggregates. With regards to chemical properties, the A horizon as well as the mixture of A and B horizon showed acidity while the B horizon showed alkalinity. The figures of organic matter, total nitrogen, available phosphate, and replaceable potassium were greater as the A horizon content increased, whereas the figures of replaceable calcium, replaceable magnesium, and conductivity increased as the A horizon content decreased. As a result of the growth and development of Pinus densiflora in each planting ground, the final survival rates were all above 100%. However, the tree height and the rate of growth for the diameter of root were higher in the order of A horizon > A horizon + B horizon > B horizon,indicating that the increased A horizon content is related to the growth and development of Pinus densiflora. The treatment of soil with improvement agents, used to recover the functions of in-situ soil showing poor growth and development, did not have a clear impact on the soil texture and porosity. However, the degree of water-stable aggregates increased significantly when using O horizon as the soil improvement agent among the types of in-situ soil. In contrast, all items related to the chemical properties showed significant differences following the treatment by soil improvement agents. The survival rate according to the treatment of soil improvement agents for the growth and development of Pinus densiflora was higher in the order of organic horizon = no treatment > compound fertilizer > organic fertilizer + compound fertilizer > organic fertilizer; this result was statistically significant with a marginal significance value of the log-rank test(p < 0.05).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2010

The glass-ceramics containing bottom ash (B/A) which was a by-produced from an electrical power plant was fabricated and its crystalline phase, microstructure and mechanical properties were analyzed. At first, the glass was fabricated by adding modifier oxide $Li_2O$ to lower the melting temperature of coal bottom ash. The glass obtained was heat-treated by using a 2-stage process to crystallize, that is to say, to increase the degree of crystallization in the glass-ceramics, the first heat treatment for nucleation was performed followed by the secondary one for the growth of nucleates. The main crystalline phase formed in the glass-ceramics was ${\beta}$-spodumene and the secondary phase was $L_2SiO_3$. It was recognized that the degree of crystallization of glass-ceramics was increased with a holding time of the secondary heat treatment stage. In the case of the specimens hold up to 3 hour, the crystallization was not completed and the microstructures and morphologies of crystalline phase were not uniform. In the specimens of holding time over 9 hours, the cracks were generated inside of it, so its compressive strength would decrease due them. In conclusion, it was able to obtain the optimum condition to fabriate the glass-ceramics having the properties of high crystallization degree, uniform microstructures and morphologies and the high mechanical strength.