• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.1
• /
• pp.1-9
• /
• 2000

The purpose of this study was to analyze the characteristics of soil erosion on the fill-slope of forest road by elapsed years after road construction. Thirteen plots were established on the fill-slope of the newly-constructed forest road, and surveyed for two years(1997~1998). In these plots, the data about soil erosion, surface runoff, vegetation coverage, slope structural characteristics and rainfall were collected. In 1997, the major causes for soil erosion were found by the correlation coefficients with the amount of surface runoff from the fill-slope, vegetation coverage, slope length, slope degree, total rainfall and max. 1 hour rainfall. But, in 1998, the major causes for soil erosion were vegetation coverage and slope degree. Using the stepwise multiple regression method, in 1997, the amount of soil erosion from the fill-slope was complexly expressed as a exponential function of statistically significant the amount of surface runoff from the fill-slope, total rainfall, slope degree of fill-slope and vegetation coverage, but, in 1998, simply expressed as a exponential function of vegetation coverage.

• Archives of Plastic Surgery
• /
• v.49 no.2
• /
• pp.215-220
• /
• 2022

Background In Japan, there is a large regional disparity in plastic surgery availability. In order for plastic surgery to be widely available for all citizens, it is essential for at least one plastic surgery facility to be located in each secondary medical zone. Methods Using the Japan Society of Plastic and Reconstructive Surgery homepage and some databases, we extracted data on secondary medical zones that do not have a plastic surgery facility. The national and regional coverage rates were calculated. The coverage rate for each group divided by the degree of population concentration was also calculated. Results We found that 147 of 344 secondary medical zones did not have a plastic surgery facility, and the area coverage rate was found to be 57.27% nationwide. The coverage rate in terms of population was 87.07% (correlation coefficient of area and population coverage = 0.983). The area coverage rates in Hokkaido-Tohoku, Kanto, Chubu, Kansai, Chugoku-Shikoku, and Kyushu-Okinawa districts were 47.46, 72.15, 76.47, 62.79, 52.08, and 32.81%, respectively. The corresponding population coverage rates were 79.92, 91.62, 94.27, 90.59, 80.68, and 69.54%, respectively. The area coverage rates in metropolitan areas, provincial cities, and rural areas were 98.08, 75.90, and 15.87%, respectively. In contrast, the area coverage rate of dermatology was 62.79% and that of orthopaedics was 97.09%. Conclusion Unfortunately, it is estimated that more than 40% of secondary medical zones are underserved by plastic surgery, and 13% of the population is not able to fully benefit from this specialty in Japan.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.94-101
• /
• 2020

This helps plus-size consumers purchase ready-made clothes and improves fitness by analyzing the upper body shapes of abdomen-obese adult males; in addition, it creates a size system based on each size interval of obesity shapes. The criteria for the 572 male subjects surveyed were over 25 kg/㎡ of the BMI, over 90 cm of waist, and over 0.85 waist hip ratio. The results were as follows. First, the higher the age group, the higher the degree of abdominal obesity in each age group. The degree of obesity decreases age increase; however, was the risk of abdominal obesity increased. Second, Compared to standard body types, the average body size of Abdomen-obese males is significantly larger, especially in the waist area than in the chest area. Third, to propose a size system for abdominal obese adult males, 16 sections with a final 2% rate of appearance were finally adopted as suit-tops size system for abdominal obese adult males by applying a 3 cm dimension gap between each designation as specified in the KS standard. The coverage ratio for the 16 sections was 72.6% and the coverage effienciency was 4.5%. The results of this study can be used in a various clothes; in addition, the activation and segmentation of the plus-size market are also believed to be significant.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.2
• /
• pp.83-93
• /
• 2003

This study was conducted for an understanding of a threatened plant species,“Penthorum chinense”, which is a vegetation structure and environmental characteristic in the southern part of Ibaraki, Japan. We selected distribution and contiguity area where P. chinense is not distributed and we set up 69 sites by the quardrat method. The surveyed general characters in each site include mean-height, mean-coverage, moisture condition water depth coverage and depth of litter layer. We calculated the degree of succession by the survey data and grasped the main distribution area, vegetation structure, growth environment of P. chinense by TWINSPAN classification and DCA ordination. The results of this study are as follows. First, P. chinense habitat was categorized into the riverside and abandoned paddy fields. The riverside was influenced by natural disturbance caused by flooding and drought. These conditions led to a poor P. chinense growth. The abandoned paddy fields as the artificial disturbance area have high potential value, because the area can preserve P. chinense growth space by succession control and water management. second, we executed TWINSPAN analysis based on vegetation coverage data of survey sites. The vegetation types were classified into the three categories: annual plant flora(P. chinense dominates in wet state), perennial plant flora(Solidago altissima dominates in dry state), and perennial plant flora(Phragmites communis dominates in wet state). Third, the data was ordinated by DCA. The sample sequences along the first and second DCA axes effectively reflected moisture condition, number of species, mean height, coverage of litter layer and degree of succession. Especially, P. chinense flora has the high correlation with moisture condition and number of species.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.298-305
• /
• 2013

Uniform silica nanobeads were synthesized by St$\ddot{o}$ber method and assembled in the form of monolayer on glass substrate using sonication method. Before the assembly of silica nanobeads, glass substrates were treated with molecular linkers, such as CP-TMS and PEI, and nanobeads were dispersed in toluene. In attachment test, SO (sonication without stacking) method and SS (sonnication with stacking) method was used and sonication time was controled. After the experiment, microbalance was use to measure deviation between before and after the attachment experiment then calculate percent of coverage. Minutely observe with SEM (Scanning Electron Microscopy) then select the most close-packed and monolayer assembled cover glass and calculate DOC (Degree of Coverage). In SO method, DOC increased very sharply and reach over 140 percent point, also got lots of multi-layer region. On the other hand, in SS method DOC increased slower than SO method but more close-packed and monolayer assembled.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.143-166
• /
• 1999

The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.

• Health Policy and Management
• /
• v.20 no.3
• /
• pp.36-57
• /
• 2010

The degree of income inequality deepened by health care expenditure was useful in assessing the health security level. This exploratory study was conducted to provide a basic evidence to prove the necessity of reinforcement the benefit coverage of South Korea's health security systems. Data from the Household Income and Expenditure Survey of Korea and Luxembourg Income Study were used. Income inequality indices before and after deduction of health care expenditure were computed, and the degree of the increase in the indices was compared among 13 countries. The degree of decrease against the effect of income inequality reduction policies by health care expenditure was determined. The relationships between the national characteristics and the increase in income inequality were examined. In South Korea, all income inequality indices increased after deducting health care expenditure, but the difference was not high compared to the mean of 13 countries. However, the degree of decrease against the effect of income inequality reduction policies by health care expenditure was high, compared to the mean of 13 countries. The proportion of public sector spending on health care proved to be statistically significant with the increase of income inequality indices (p<0.05). In the context of the continuous increase in health care expenditure, if benefit coverage of health security systems is not reinforced, income inequality will all the more increase due to health care expenditure. In the establishment of the policies for reinforcement of the benefit coverage, income inequality after deduction of health care expenditure should be continuously monitored.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.131-132
• /
• 2009

지형의 상태를 알 수 없는 타겟 지역에 구축되는 USN 환경은 각기 서로 다른 connectivity degree와 이동 가능한 센서들의 수를 가지면서 coverage의 최대화를 요구한다. 본 논문에서 설계한 모바일 센서 네트워크 시뮬레이터(MSNS)는 USN 환경을 GML로 구성하고, 각 센서들의 센싱/통신 범위가 설정된 센서 노드들의 수와 유지해야할 connectivity를 입력받아 주어진 조건에서 타겟 영역이 얼마나 효율적으로 coverage되는지를 가시화한다.

• The Korean Journal of Health Service Management
• /
• v.12 no.2
• /
• pp.89-99
• /
• 2018

Objectives : To compare the degree of achievement of Universal Health Coverage (UHC) among 39 developing countries in Africa and to investigate the correlation between health care financing and the UHC index. Methods : For data, 14 UHC indexes were used in 2015 supplied by the World Health Organization (WHO). In addition, this study used a 10% of threshold point corresponding to the catastrophic health expenditures and a 25% of threshold points as a health care financing index. Results : It was found that there were significant difference among Least Low Developed Countries (LLDCs), Other Low Income Countries (Other LICs), Lower Middle Income Countiies (LMICs), Upper Middle Income Countires (UMICs) to compare the average value by nation on the UHC index. This study showed that the UHC index of LLDCs was lowest, but the average value was higher as it moved towards LMICs and UMICs. In addition, it was found that there was an average value difference among the groups like LLDCs, Other LICs, LMICs and UMICs. As a result of comparison, it was found that the spending of household health expenditure increased as LLDCs moved towards UMICs when the burden of household health expenditure was 25%. Conclusions : This study aimed to compare the UHC indexes of African nations and to investigate the correlation between the degree of spending of total expenditure on health and burden of household health expenditure and UHC, and its effect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.267.1-267.1
• /
• 2013

In modern science and technology, the organization of building blocks, such as spherical particles and zeolite, is important to form a nanostructure. So, it is essential to develop methods for organizing them into large scale for many precise applications. Up to now, reflux and stirring is widely used method for organization of colloidal particles. However, because this method is hard to organize building block with high coverage and uniform orientation, it is necessary to research another method. In this work, we synthesized spherical silica particles using St$\"{o}$ber method and organized them on the glass which is coated with 3-chloropropyltrimethoxysilane (CP-TMS) and polyethyleneimine (PEI) using Sonication method. Although spherical silica particles are difficult to attach on the glass due to their small attachment site, we improved this problem by coating PEI. We introduced two mode of reaction promotion, sonication (SO) and sonication with stacking between the bare glass (SS), and investigated degree of coverage (DOC) and degree of close packing (DCP).