• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.9-13
• /
• 2017

This study presents a simple method to control the seed orientation which leads to the various growth characteristics of a single grain REBCO (RE: rare-earth elements) bulk superconductors. Seed orientation was varied systematically from c-axis to a-axis with every 30 degree rotation around b-axis. Orientations of a REBCO single grain was successfully controlled by placing the seed with various angles on the prismatic indent prepared on the surface of REBCO powder compacts. Growth pattern was changed from cubic to rectangular when the seed orientation normal to compact surface was varied from c-axis to a-axis. Macroscopic shape change has been explained by the variation of the wetting angle of un-reacted melt depending on the interface energy between $YBa_2Cu_3O_{7-y}$ (Y123) grain and melt. Higher magnetic levitation force was obtained for the specimen prepared using tilted seed with an angle of 30 degree rotation around b-axis.

• 한국결정성장학회지
• /
• 제18권2호
• /
• pp.72-75
• /
• 2008

Zinc oxide (ZnO) thin films were prepared by a sol-gel method. The structural and electrical properties were investigated by varying drying and annealing temperatures. The thin films were coated (250 nm) by spin-coating method on glass substrates. The optimum drying temperature of ZnO thin films was 300$^{\circ}C$ where the resistivity was the lowest and the preferred c-axis orientation was the highest. The annealing was carried out in air and inert atmospheric conditions. The degree of the preferred c-axis orientation was estimated. The highest preferred c-axis orientation was recorded at 600$^{\circ}C$. The preferred c-axis orientation and grain growth resulted in the mobility enhancement of the ZnO thin films, and the lowest resistivity was 0.62${\Omega}{\cdot}cm$ at 600$^{\circ}C$.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.393-397
• /
• 2003

To investigate the effect of AIN c-axis orientation on the resonance performance of film bulk acoustic wave resonators, solidly mounted resonators with crybtallographically different AIN piezoelectric films were prepared by changing only the bottom electrode surface conditions. As increasing the degree of c-axis texturing, the effective electromechanical coupling coefficient ($\kappa$$\_$eff/)$^2$ in resonators increased gradually. The least 4 degree of full width at half maximum in an AIN(002) rocking curve, which corresponds to $\kappa$$^2$$\_$eff/ of above 5%, was measured to be necessary for band pass filter applications in wireless communication system. The longitudinal acoustic wave velocity of AIN films varied with the degree of c-axis texturing. The velocity of highly c-axis textured AIN film was extracted to be about 10200 n/s by mathematical analysis using Matlab.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.9-13
• /
• 1995

In this paper, Zinc Oxide films, with a high degree of c-axis orientation, have been grown on glass substrates by a rf magnetron sputtering. The maximum crystal orientation was found to occur with substrate temperature 150$^{\circ}C$, input power 190W, oxygen rate 50%, target-substrate distance 55mm. It is proposed to achieve high-resistivity ZnO films by increasing the annealing temperature. The piezoelectric layers, preferred oriented with (002) perpendicular to the layer with 4.9$^{\circ}$, could be obtained by the annealing temperature 300$^{\circ}C$ in oxygen atmosphere. It is indicated that the relative permittivity is range from 8.9 to 9.8 in the frequency ranging from 10KHz to 5MHz.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1107-1112
• /
• 1998

We could obtan c-axis oriented $SrBi_2$$Ta_2$$O_9$ thin films on usual Pt(111)/Ti/$SiO_2$/Si(100) substrate using a r. f. magnetron sputtering technique. According to the increase of sputtering pressure from 250 to 300 mTorr the Bi content and degree of the c-a xis preferred orientation of $SrBi_2$$Ta_2$$O_9$ thin films were increased. By controlling Bi(or $Bi_2O_3$) loss from $SrBi_2$$Ta_2$$O_9$ thin films during post annealing and by inserting $Bi_2O_3$ layer in $SrBi_2$$Ta_2$$O_9$ thin films the effect of Bi content on the c-axis oriented growth of $SrBi_2$$Ta_2$$O_9$ thin films could be investigated without the effect of sputtering pressure. The degree of the c-axis preferred orientation of $SrBi_2$$Ta_2$$O_9$ thin films was increased with increasing with increasing Bi content by control of Bi(or $Bi_2O_3$) loss of $SrBi_2$$Ta_2$$O_9$ thin films. But the c-axis oriented growth of $SrBi_2$$Ta_2$$O_9$ thin films disappeared by the inserting of $Bi_2O_3$ lay-er in $SrBi_2$$Ta_2$$O_9$ thin films.

• Progress in Superconductivity
• /
• 제2권1호
• /
• pp.15-19
• /
• 2000

[ $YBa_2Cu_3O_{7-\delta}$ ] thin films were deposited by laser ablation using modified melt-textured grown targets. As the laser energy density was increased, the films showed an increasing c-axis orientation and an improvement of superconducting properties. However, at 4 $J/cm^2$, the degree of c-axis alignment and $J_c$ of the film were considerably reduced. These were attributed to the enhanced a-axis outgrowths. It was shown that the increased laser energy density resulted in the formation of $Y_2O_3$ inclusions during the c-axis film growth, and that these inclusions nucleated the a-axis outgrowths.

• 센서학회지
• /
• 제5권3호
• /
• pp.87-92
• /
• 1996

Pb과잉인 PLT 타겟을 이용하여 MgO(100) 단결정 기판위에 고주파 마그네트론 스펏터링법으로 PLT박막을 제조하였으며, c-축 배향에 따른 물리적 및 전기적 특성을 조사하였다. PLT박막의 c-축 배향성은 제조조건에 따라 변화하며, 본 연구에서의 제조조건은 기판온도가 $640^{\circ}C$, 분위기압이 10 mTorr, $Ar/O_{2}$비가 10 및 고주파 전력밀도가 $1.7 W/cm^{2}$이었다. 이러한 조건에서 제조된 PLT 박막은 표면에서의 Pb/Ti 비가 1/2, 저항률이 $8{\times}10^{11}{\Omega}{\cdot}cm$ 및 비유전률이 110 이었다. PLT박막을 이용하여 초전형 적외선 센서를 제조하였으며, 제조된 적외선 센서의 피크 대 피크 전압은 450 mV, 신호대 잡음비는 7.2 였다.

• 한국세라믹학회지
• /
• 제39권12호
• /
• pp.1128-1132
• /
• 2002

MFS-FET(Metal-Ferroelectric-Semiconductor Field Effect Transistor) 구조의 비휘발성 기억소자용 $ReMnO_3$(Re:Y, Ho, Er) 박막을 금속 유기 화학 기상 증착법(MOCVD)으로 증착하였다. $ReMnO_3$ 박막을 Si(100) 기판 위에 700${\circ}C$-2시간 증착 시켜 결정화를 위해 대기 중에서 900${\circ}C$-1시간 열처리 시 육방정계(hexagonal) 단일상의 $ReMnO_3$ 박막을 형성하였다. 육방정계 단일상 구조에서 $ReMnO_3$ 박막의 강유전 특성은 c-축 배향성에 의존하였으며, c-축 배향성이 우수한 $YMnO_3$ 박막의 잔류 분극(Pr) 값은 105 nC/$cm^2$로 가장 우수하였다. 또한 누설 전류 밀도(leakage current density) 값은 미세구조의 결정립 크기에 의존하였으며, 결정립 크기가 100∼150 nm인 $YMnO_3$ 박막의 누설 전류 밀도 값은 인가전압 0.5 V에서 $10^{-8}$ A/$cm^2$을 나타내었다.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.619-623
• /
• 2006

FBAR(Film Bulk Acoustic Resonator) 소자의 공진특성을 결정하는 가장 중요한 요소는 압전막의 압전성을 들 수 있다. FBAR 압전막으로 유력한 ZnO 압전박막은 (002)면 c-축 우선배향성(preferred orientation)의 정도에 따라서 압전성이 결정된다. 그러므로 ZnO 박막의 우선배향성에 관한 연구는 많은 연구자들의 관심사가 되어왔다. 본 논문에서는 ZnO 보조씨드충(helped seed layer)을 이용하여 ZnO 압전박막의 우선배향성에 대하여 조사하였으며, rocking curve의 표준편차$(\sigma)$ 값이 $1.15^{\circ}$인 주상형 결정립을 가진 c-축 ZnO 압전박막이 우수한 압전특성을 나타내는 것을 확인하였다.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.255-262
• /
• 2003

본 논문에서는 FBAR(film bulk acoustic wave resonator) 필터 응용을 위해 Al 하부전극 상에서 RF magnetron sputtering 기술을 이용한 ZnO 박막 증착 및 공정온도가 ZnO 결정성장에 미치는 영향에 대한 연구결과를 발표한다 ZnO 박막의 압전특성은 FBAR 소자의 공진특성을 결정하는 가장 중요한 요소이고 압전성은 증착된 ZnO박막의 c축 우선배향성의 정도에 의해 결정된다는 사실을 고려한다면 ZnO 결정성장에 미치는 공정온도에 관한 연구는 매우 의미 있는 일이다. 본 실험을 통하여 ZnO 박막의 성장특성은 상온에서부터 35$0^{\circ}C$까지의 실험조건에서 c축 우선배향성의 정도에 따라 RF power에 관계없이 온도를 2개의 임계온도에 의해 나눠진 3개의 온도구간으로 구분할 수 있었다. 결과적으로 20$0^{\circ}C$ 이하의 공정온도에서는 주상형 결정립을 가진 c축 우선배향의 ZnO 박막을 얻을 수 있었다. 이렇게 얻은 ZnO박막을 사용하여 FBAR 다층박막 구조를 구현하였다.